LiuGong loader brake fluid change guide
For users of LiuGong loaders, regular changes in brake fluid are an important step to ensure driving safety and maintain mechanical performance. So, where should the brake fluid of Liugong loader be replaced?
First, to find the brake fluid change point for your LiuGong loader, you need to open the engine compartment of the loader. Typically, the brake fluid reservoir is located in a prominent position in the engine compartment, near the driver's side.
Once you've found the brake fluid reservoir, you can start changing your brake fluid. Before replacing, make sure the loader is at a standstill and that the engine has cooled down. Then, open the lid of the brake fluid reservoir and use a special brake fluid extraction tool to pump out the old brake fluid.
Next, fill the brake fluid reservoir with new brake fluid. Please note that the type and specification of the brake fluid should match the requirements of the original car. When adding brake fluid, keep an eye out for the tick marks on the brake fluid reservoir to make sure the level of the brake fluid is within the correct range.
After changing the brake fluid, don't forget to check how well the brake system is working. The loader can be started and the brake pedal can be lightly pressed several times to ensure that the brake fluid is evenly distributed in the system and that the brake system is working properly.
In summary, the change point of brake fluid for LiuGong loaders is located in the brake fluid storage tank in the engine compartment. By following the above steps, you can easily complete the brake fluid change and ensure the safety and mechanical performance of the loader.
