Where to add oil to Liugong loaders: detailed guidance and practical advice
As a user of a LiuGong loader, you may often have questions about maintenance, especially about oil changes and additions. Engine oil is an important guarantee for the proper operation of the loader, so knowing how to add it correctly is very crucial. This article will provide you with the detailed steps and precautions for adding oil to your Liugong loader.
1. The position of adding Liugong loader oil
The oil infill port of a LiuGong loader is usually located on the side or above the engine. The exact location may vary depending on the model and year of loader. In order to accurately locate the oil filler, it is recommended to refer to your loader's instruction manual or consult a professional technician.
2. Preparation before adding engine oil
Before adding oil, you need to prepare the following tools and materials:
1. The right type of oil: Make sure that the oil you buy meets the model and specifications recommended in the LiuGong loader user manual.
2. Cleaning cloth: used to clean dust and debris around the oil addition port.
3. Oil filter (if needed): The function of the oil filter is to filter the impurities in the oil and keep the oil clean. When changing the oil, the oil filter is usually changed as well.
3. The steps of adding oil to Liugong loader
1. Open the engine compartment of the loader and locate the oil refill port.
2. Use a cleaning cloth to clean the dust and debris around the oil addition port to make sure the addition port is clean.
3. Open the oil drum and use the funnel to slowly pour the oil into the oil filling port, while paying attention to the oil level.
4. When the oil level reaches the upper limit mark on the dipstick, stop adding oil.
5. Install the oil filter (if needed).
6. Close the oil refill port and engine compartment cover.
4. Precautions
1. When adding engine oil, it is important to ensure that the model and specification of the engine oil meet the requirements of Liugong loaders, and avoid using different brands or models of engine oil.
2. When adding engine oil, pour it slowly to avoid oil splashing or filling too much.
3. Check the oil level regularly to make sure the oil is within the normal range. If you find that the oil level is too low, you should add the oil in time.
Through the introduction of this article, I believe you have a clearer understanding of where to add oil to Liugong loaders. In daily use, proper addition and replacement of oil is very important to ensure the proper operation and longevity of the loader. If you have any questions or need further assistance, please feel free to contact professional technicians or consult Liugong's official customer service.
