Liugong loader is an important equipment widely used in various engineering and construction scenarios. In order to ensure its proper operation and extend its service life, regular maintenance and upkeep are essential. Among them, the filling of hydraulic oil is an important job in the maintenance of loaders. So, where does the Liugong loader add hydraulic oil?
First of all, we need to find the hydraulic oil filler of the loader. Typically, the filler port is located in the engine compartment of the loader, near the location of the hydraulic tank. You can open the bonnet and look for the filler cap labeled "Hydraulic Oil" or "HydraulicOil".
Before filling the hydraulic fluid, make sure to use the type and specification of hydraulic oil recommended for the LiuGong loader. Different models of loaders may require different types of hydraulic fluids, so refer to your loader's instruction manual or consult a professional for accurate advice.
When filling hydraulic oil, use clean filling equipment to avoid impurities and dirt from entering the hydraulic oil tank. At the same time, make sure that the filling volume does not exceed the recommended capacity of the hydraulic oil tank to avoid hydraulic oil spillage or other problems.
In addition to regular filling of hydraulic oil, the oil level and oil quality of the hydraulic oil tank should also be checked regularly. If the oil level is found to be too low or the oil quality is not good, it should be filled with new oil or replaced in time. In addition, the area around the hydraulic tank and filler port should be cleaned regularly to keep it clean and dry.
In conclusion, proper filling of hydraulic oil is essential for the proper operation and maintenance of LiuGong loaders. By following the steps and recommendations above, you can ensure that your loader's hydraulic system is always in good working order.
