The location of adding glass water for Liugong loaders and the correct maintenance method
As a user of Liugong loaders, you must have some understanding of the maintenance and maintenance of machinery. Among them, the addition of glass water is an important work in daily maintenance. So, where should you add glass water for Liugong loaders? This article will give you a detailed answer and share some correct ways to add glass water.
First of all, we need to find the glass water filling port of the LiuGong loader. Usually, the filler port is located at the front of the vehicle, near the windshield. You can check your vehicle's manual or consult a professional for more accurate location information.
Before adding the glass water, please make sure that the glass water you buy meets the requirements for the use of LiuGong loaders. Different brands and models of glass water may have different chemical compositions and properties, so be sure to choose the right one for your loader.
The steps to add glass water are as follows:
1. Open the lid of the filler port, usually the lid is a knob made of plastic or metal.
2. Pour in the glass of water slowly to avoid splashing or spilling. Be careful not to overfill the glass of water to avoid waste or damage to mechanical parts due to spillage.
3. After filling, tighten the cap to ensure good sealing.
In addition to the correct addition method, there are a few things to keep in mind:
- Regularly check the balance of glass water to ensure timely replenishment.
- When using glass water, pay attention to the angle and strength of the water spray, and adjust it in time if there is any abnormality.
- If you find any abnormalities such as turbidity or odor in the glass water, please replace it with a new glass water in time.
Through the introduction of this article, I believe you have understood the addition location and correct maintenance method of Liugong loader glass water. In daily use, be sure to follow the correct method of addition and maintenance to ensure the normal operation and longevity of the loader.
