Liugong loader dipstick position and inspection method
The position of the dipstick for LiuGong loaders is a basic knowledge that every operator should know. The dipstick can not only help us judge the margin of oil, but also understand the working condition of the engine by observing the cleanliness of the oil. This article will detail the specific location of the LiuGong loader dipstick and how to properly check and change the oil.
1. The position of the oil dipstick of the Liugong loader
The oil dipstick of a LiuGong loader is usually located on the side of the engine block, near the oil filler. There is a distinct graduation mark on the dipstick that indicates the normal level range of the oil. When performing an oil check, make sure the loader is parked on flat ground and that the engine has cooled to room temperature, which will allow for a more accurate oil level.
2. How to check the engine oil
1. Open the oil dipstick cap and wipe the dipstick with a clean cloth or paper towel to ensure that there is no oil stain and impurities on the ruler.
2. Insert the dipstick back into place, making sure it is inserted to the bottom.
3. Pull out the dipstick again and observe the oil level on the dipstick. If the oil level is within the scale mark, the oil level is normal, if the oil level is below the scale mark, you will need to fill the oil, and if the oil level is too high, you may need to drain the oil.
3. Oil replacement cycle and precautions
The oil change interval for LiuGong loaders is usually every 500 hours of operation or 3 months (whichever comes first), but the specific cycle needs to be adjusted according to the working environment and usage of the loader. When changing the engine oil, be sure to use the brand and model of oil that meets the requirements of Liugong loaders to avoid damage to the engine caused by the use of inferior engine oil.
Through the introduction of this article, I believe you have a deeper understanding of the location and inspection methods of Liugong loader dipsticks. In actual operation, be sure to follow the standardized operating procedures to ensure the normal operation and service life of the engine.
