For many operators who operate LiuGong loaders, it is important to know where the oil is located and how to change it. Oil is one of the key factors in ensuring the proper operation of a loader, and proper oil changes and position checks can extend the life of your machine. The oil location of a LiuGong loader is usually under the engine, near the oil pan. To find it, you can first stand in front of the loader, facing the engine compartment. The oil filler usually has a conspicuous cap or label with words such as "motor oil" or "engine oil" on it. Open this lid and you will be able to see where the oil is. In order to ensure the normal use of the oil, it is recommended to check the level height of the oil regularly. When the oil level is below the "minimum" mark, the oil should be added in time. At the same time, it is also necessary to pay attention to the quality of the engine oil, if the oil becomes cloudy or has a peculiar smell, it should be replaced in time. When changing the oil, in addition to choosing the right oil model for your LiuGong loader, you should also follow the correct replacement steps. First of all, make sure that the loader is on flat ground and turn off the engine. Then, use a dedicated oil filter wrench to loosen the old filter and remove it. Next, use a funnel to pour new oil into the oil filler until the liquid level reaches the "maximum" mark. Finally, replace the oil filter and restart the loader to check for leaks. Through the above introduction, I believe you have a deeper understanding of the location of Liugong loader oil and how to change it. Proper oil management and maintenance can ensure the stable operation of the loader, reduce the occurrence of failures, and bring more convenience and benefits to your work.
