Global-CE> Engineering Machinery Vocabulary> Wheel Loader Glossary > Where is the Liugong loader drain switch

Where is the Liugong loader drain switch

The position of the LiuGong loader drain switch can be a headache for many machine operators, as incorrect operation can lead to machine failure. So, where is the water drain switch of Liugong loader? This article will introduce it to you in detail. First of all, we need to clarify the model and configuration of Liugong loaders, because the position of the water drain switch of different models of loaders may be different. In general, the drain switch is usually located in the engine compartment of the loader, near the radiator or water tank. The steps are as follows: 1. Open the engine compartment cover of the loader and find the radiator or water tank. 2. Look for the drain switch along the bottom of the radiator or tank, it is usually a valve made of plastic or metal that can be turned on or off by turning or pulling. 3. After finding the drain switch, make sure to turn off the engine and wait for some time before operation to allow the coolant temperature to drop to avoid burns. 4. Turn on the water switch and drain the coolant until the discharged liquid becomes clear. 5. Turn off the drain switch and check if there is any leakage. It should be noted that when operating the water discharge switch, be sure to follow the instruction manual and safety operation procedures of the loader to avoid unnecessary losses. Through the introduction of this article, I believe you have understood the location and operation method of the water discharge switch of Liugong loader. If you have any further questions or need more help, please feel free to contact our technical support team and we will be happy to assist you.

Related Brands

Links

Copyright Notice © 2002-2024 lmjx.net