Liugong loader 860H handbrake position and operation guide
As an efficient and reliable construction machine, Liugong loader 860H has excellent performance in operation and maintenance. Among them, the handbrake is an important part of the safe operation of the loader. This article will introduce the location and operation method of the Liugong loader 860H handbrake in detail to help users better understand and use this function.
1. Handbrake position
The handbrake of the LiuGong Loader 860H is usually located on the console on the right side of the driver's seat. The exact location may vary slightly depending on the vehicle type and configuration, but it is usually within easy reach of the driver. Handbrake levers are usually long strips with clear markings for quick identification by the driver.
Second, the operation method
1. When parking, first put the gear into neutral, and then pull up the handbrake lever to ensure that the loader is parked firmly. When parking in a place with a steep slope, it is recommended to pull the handbrake a little tighter to prevent the loader from slipping.
2. When you need to start the loader, press the clutch pedal first, and then gently release the handbrake operating lever, and at the same time hang the gear into the appropriate gear, slowly release the clutch, so that the loader starts smoothly.
3. Precautions
1. When using the handbrake, always make sure that the loader has been completely stopped, otherwise it may cause damage to the vehicle.
2. Using the handbrake for a long time will aggravate the wear of the brake pads, so it is recommended to check the wear of the brake pads regularly and replace them in time.
3. Do not use the handbrake as a service brake during driving, so as not to cause unnecessary damage to the vehicle.
Through the introduction of this article, I believe you have a deeper understanding of the handbrake position and operation method of Liugong loader 860H. In practice, be sure to follow the operating procedures to ensure safety.
