For many operators who operate LiuGong loaders, regular oil checks and oil changes are a critical step in ensuring the proper functioning of the machine. However, when carrying out these maintenance work, many people may encounter a question: where is the oil caliper of the Liugong loader? This article will provide you with detailed answers to help you easily find the location of the oil caliper and perform the correct oil check.
First of all, we need to understand the role of oil calipers. Oil calipers are used to measure the oil level of the engine oil and ensure that the oil is in the correct range. This is essential to protect the engine and extend the life of the machine. So, where exactly are the oil calipers of Liugong loaders?
Typically, the oil calipers of LiuGong loaders are located next to the engine, close to the oil tank. The exact location may vary depending on the loader model, so it is recommended that you refer to your machine manual or contact LiuGong customer service for more accurate information.
Once you have found your oil caliper, you can follow these steps to do an oil check:
1. Make sure the loader is parked on flat ground and turn off the engine.
2. Open the oil tank cap and find the oil caliper.
3. Pull out the oil caliper and wipe it clean with a clean cloth.
4. Reinsert the oil caliper, making sure it is fully inserted to the bottom.
5. Pull out the oil caliper again and observe whether the oil level is within the specified range.
6. If the oil level is too low, please add the appropriate amount of oil in time.
With the above steps, you can easily carry out the oil check of your LiuGong loader to ensure the normal operation of the machine. At the same time, it is recommended that you change the engine regularly to ensure that the engine is in good condition.
In conclusion, finding the oil calipers of your LiuGong loader and doing the right oil check is a crucial step in maintaining your machine. Hopefully, this article will provide you with useful information to help you better carry out the daily maintenance work of your loader.