Liugong Loader 50CX Hydraulic Oil Filling Guide
Liugong loader 50CX is an efficient and reliable construction machine, which is widely used in construction, mining, logistics and other fields. To ensure the proper operation and longevity of your loader, proper hydraulic oil filling and maintenance are critical. This article will give you a detailed introduction to the filling method and precautions of Liugong loader 50cx hydraulic oil.
First, the choice of hydraulic oil
When choosing a hydraulic oil for your LiuGong loader 50cx, be sure to follow the manufacturer's recommendations. Usually, the loader uses HM46 or HM68 anti-wear hydraulic oil, these two types of hydraulic oil have good lubrication and anti-wear performance, which can effectively protect the hydraulic system of the loader.
Second, the amount of hydraulic oil filled
The filling amount of Liugong loader 50cx hydraulic oil should be based on the actual situation. Generally speaking, when replacing the hydraulic oil, the old oil in the oil tank and cylinder should be drained cleanly, and the new oil should be added to the oil level line calibrated by the oil tank. For the specific filling amount, please refer to the instruction manual of the loader or consult professional and technical personnel.
3. Hydraulic oil filling steps
1. Make sure the loader is parked on flat ground and turn off the engine.
2. Open the tank cap and use a clean funnel to slowly pour new hydraulic oil into the tank to avoid spilling.
3. During the filling process, check the oil level line regularly to ensure that the filling amount is moderate.
4. After the filling is completed, tighten the fuel tank cap, and restart the loader to check whether the hydraulic system is operating normally.
Fourth, the hydraulic oil replacement cycle
To ensure the normal operation of the loader, it is recommended to change the hydraulic oil regularly. Normally, the hydraulic oil replacement interval is 6 months or 1000 hours of operation, whichever comes first. In the actual use process, if the hydraulic oil is found to be seriously polluted or emulsified, it should be replaced in time.
In conclusion, proper hydraulic oil filling and maintenance is of great significance for the performance and service life of the LiuGong Loader 50CX. Hopefully, this article will provide you with a useful reference to help you better maintain and use your loader.
