Cat excavators are extremely well known in the area of mechanical equipment and have a stable and durable performance.One of the central concerns of many of the owners and maintenance staff is the pressure from the slow-pumps on the Cat excavator.Understanding and mastering the standard pressure range of the Cat draught pump will help us to better perform equipment maintenance and troubleshooting.First of all, it is clear that the pressure set of the slow-pumps may be different from the model or series of Cat excavators.Normally, the pressure of the Cat Retarder is set as a sophisticated process, which generally needs to be kept within the reasonable limits set by the manufacturer.For example, the recommended working pressure of a slow pump for a Cat excavator may be 20-30 psi (pound/square inch), but this is for reference purposes only and should be based on the official manual.In order to ensure the proper operation of excavators in a slow state and the economical nature of fuel, regular inspection and adjustment of the pressure of the slow-pump is essential.It is recommended that precise testing and adjustment be done in conjunction with a professional after-sale service team or by reference to the equipment operations manual in order to avoid loss of engine performance or other potential problems as a result of excessive or low reticulation of the slow-pump pressure.In conclusion, there is no uniform answer to the question of "How much pressure is on the Cat Digger" and the key is to look at the relevant technical parameters according to the specific type of aircraft and follow professional guidance for their rational setting and maintenance.This reminds the wider user that any maintenance of the Cat excavator must be carried out in compliance with the safety and efficiency of the operation.
