| Rated Power | 373/2100kW |
|---|---|
| Working pressure | 35MPa |
| Max. output torque | 400kN.m |
The design of the double boom structure bring a significant improvement in stability and convenient for transport.
It adopts the dedicated hydraulic retractable crawler chassis and large diameter slewing bearing to provide extraordinary stability and transport convenience；
Imported Cummins electric control turbo-supercharged with three gears engine is used, it has strong power. According to specific working conditions, the users can select a corresponding gear of the engine, getting the drilling rig working as three engine.
The main hydraulic system adopts the negative flow control, and adopts the main power control and limit power control together which can increase the system efficiency and make the most of the engine power. It adopt three-in-one colling system which is tightly packed and has a high-effeciency in cooling.
It adopt the single-rope for main winch to figure out the wear of the steel rope, and extend the life-span.
The rotary drive can switch from Nromal Mode, Rock Mode and Energy-Saving Mode, the user can select a corresponding mode of the rotary drive according to the specific working conditions, which can greatly improve the working efficiency and low the fuel consumption
Optional configuration according to customers' requirement, E.g: Crowd winch, Outrigger cylinder, Sleeve-driven and so on.
It is equipped with a centralized lubrication system as standard configuration to provide more convenient maintenance and make the machine a good reliability .
| Project | Unit | Parameter |
| Max.Drilling Diameter | ||
| Uncased | (mm) | 油缸加压φ2800/卷扬加压φ2500 |
| Cased | (mm) | φ2200 |
| Max.Drilling Depth | (m) | 103 |
| Dimension | ||
| Working condition L × W × H | (mm) | 10995×4900×26640 |
| Transportation condition L × W × H | (mm) | 20755×3500×3910 |
| Overall Drilling Weight | (t) | 113 |
| Engine | ||
| Model | - | CUMMINS QSX15-C500 |
| Rated Power | (kW) | 373/2100 |
| Hydraulic System | ||
| Working pressure | (MPa) | 35 |
| Rotary Drive | ||
| Max. output torque | (kN.m) | 400 |
| Rotary speed | (r/min) | 5.5~21 |
| Spin off speed | (r/min) | - |
| Pull-Down Cylinder | ||
| Max.pull-down piston push | (kN) | 300 |
| Max.pull-down piston pull | (kN) | 400 |
| Max.pull-down piston stroke | (mm) | 6000 |
| Crowd Winch | ||
| Max.pull-down piston push | (kN) | 400 |
| Max.pull-down piston pull | (kN) | 400 |
| Max. pull-down piston stroke | (mm) | 18000 |
| Main Winch | ||
| Max.pulling force | (kN) | 360 |
| Max. single-rope speed | (m/min) | 60 |
| Diameter of the steel wire rope | (mm) | 36 |
| Auxiliary Winch | ||
| Max. Pulling force | (kN) | 100 |
| Max. single-rope speed | (m/min) | 65 |
| Diameter of the steel wire rope | (mm) | 20 |
| Drilling mast | ||
| Left/right inclination of mast | (°) | 42464 |
| Front inclination of mast | (°) | 5 |
| Rotary table slewing angle | (°) | 360 |
| Traveling | ||
| Max. traveling speed | (km/h) | 1.3 |
| Max.grade ability | (%) | 35 |
| Crawler | ||
| Track shoe width | (mm) | 800 |
| Distance between tracks | (mm) | 3500~4900 |
| The length of crawler | (mm) | 5600 |
| Average ground pressure | (kPa) | 120 |
Xuzhou Construction Machinery Group Co., Ltd.
Name : XCMG
Service Tel : 86-516-87739271
E-mail : export@xcmg.com
Web Site : http://www.xcmg.com/en-us/
Address :
Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China
