SANY SYG5530THB 62 Truck-mounted Concrete Pump

Sany SYG5530THB 62 truck-mounted concrete pump has 62m vertical reach with the height limit programmed to prevent boom contact with an obstruction or overhead hazard. The 62m concrete pump provides the users reliable pumping performance along with the highly wear resistant parts including delivery pipe, discharge port, transition bushing, concrete piston, wear plate, cutting ring and delivery cylinder that improve the pumping efficiency and reduce down time.

One Button Stabilization Technology

The one button stabilization technology quickly dampens any boom movement resulting from repositioning the boom. This allows precise positioning of the end hose.

Boom Anti Vibration Technology

The boom anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.

Energy Saving Technology

With cycle times of up to 29 per minute (at 12MPa), pump efficiency is increased up to 25% while fuel consumption is decreased by up to 10%.

Anti Overswing Technology

By adopting our new swing brake technology, the boom's overswing amplitude is reduced by 60%

Fault Self Diagnostic Technology

Continually monitors more than 200 aspects of the system during operation. Faults are displayed on the monitor. Review of the detected faults can reduce troubleshooting time by 70%.

Smart Boom System

• One Button Boom Extend/Retract

Press upward on the boom extend/retract button to extend the boom or press downward to retract the boom automatically.

• Coordinated Section Operation

The boom can be rapidly and accurately repositioned by coordinating the movement the first and second sections

Safety Technology

• Boom Overload Protection Technology

Relief valves are mounted on the boom cylinder counterbalance valves. These valves will release pressure in the event of excessive boom load to prevent damage to the boom.

• Hopper Screen Interlock Technology

As an operator protection measure, the pump will automatically stop when the hopper screen is opened.

• Hydraulic Oil Level Monitoring

The oil level in the hydraulic reservoir is continually monitored. If the level drops below a preset level, an alarm will sound and the pump will be stopped to prevent damage to the hydraulic system.

Length	15730 mm
Width	2500 mm
Height	4000 mm
Empty weight	53000 kg
Vertical reach	62 m
Horizontal reach	57.6 m
Reach depth	42 m
Unfolding reach	16.2 m
1st section-Length	12140 mm
1st section-Articulation	90°
2nd section-Length	10090 mm
2nd section-Articulation	180°
3rd section-Length	9570 mm
3rd section-Articulation	180°
4th section-Length	12280 mm
4th section-Articulation	230°
5th section-Length	7945 mm
5th section-Articulation	200°
6th section-Length	5100 mm
6th section-Articulation	100°
Rotation	±270º
Outrigger spread L-R-Front	11420 mm
Outrigger spread L-R-Rear	13880 mm
Output (Low/High-pressure)	180/125 m³/h
Pressure (Low/High-pressure)	8.3/12 Mpa
Max. strokes per minute (Low/High-pressure)	29/19 times/min
Delivery cylinder diameter	260 mm
Stroke length	2100 mm
Hydraulic system	Open
Hydraulic system pressure	32 Mpa
Hydraulic tank capacity	650 L
Water tank capacity	700 L
Pipe size	125 mm
End hose length	3 m
End hose diameter	125 mm
Chassis model	BENZ ACTROS 5046
Engine model	OM501LA.IV/5
Engine power	300/1800 kW/rpm
Emissions	Euro Ⅳ（Euro III adjustable）
Fuel tank capacity	400 L
Displacement	11.946 L
Max.speed	80 km/h