Global-CE > Crawler Loader > Mustang ManitouCrawler Loader > Mustang Manitou 1750RT NXT3 Track Loaders
Mustang Manitou 1750RT NXT3 Track Loaders

Mustang Manitou 1750RT NXT3 Track Loaders

Lift Height 128" (3251)
Capacity 1,750 lbs. 794
Power 68.4 hp (51) @ 2500

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 
  • Tier IV-certified Yanmar diesel engines provide 69.9 hp (52.1 kW)
  • The welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
  • Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
  • Optional rear bumper/counterweight provides additional protection and towing capability.
  • Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work
  • Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
  • Electro-hydraulic joystick controls provide the ultimate in operator comfort and controllability. They are also not affected during cold weather operation.
  • Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
  • Standard, selectable 2-speed drive motors, horn and backup alarm.
  • Optional speed control adds ability to tailor machine operating speeds to application, independent of engine rotation.
  • Standard ISO drive pattern, optional selectable ISO and dual hand (H-pattern) controls.
  • Multi-purpose LCD display provides easy readout during operation.
  • Single button allows simple scrolling and selection of various display functions.
  • Standard Drive Sensitivity Adjustment offers five settings that change five parameters to suit operator preference, skill and application requirements. Adjustable settings include:
  • Joystick Sensitivity
  • Position Reaction
  • Engine Response
  • AntiStall
  • Pump Swash Plate Position
  • Optional HydraGlide™ system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.
  • Cab forward design enhances the view to the bucket.
  • Level II FOPS is standard equipment.
  • New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort.
  • Fully adjustable controls mounted to a standard mechanical suspension seat or an optional air-ride seat deliver outstanding comfort and precision control by moving with the operator during operation.
  • Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
  • Optional pressurized sealed cab enclosure with heat/AC, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.
  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine warranty, parts and service are handled through dealership servicing in conjunction with Mustang parts and service support.
  • Standard and optional high-flow auxiliary hydraulics are designed to handle virtually every flow/high performance attachment.
  • New cast-iron pump design delivers efficient flow at higher temperatures.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Electro-hydraulic controlled hydrostatic transmission with direct engine coupling provides high operating efficiency and AntiStall technology keeps the power flowing.
  • Power track drive motors deliver superior pushing power.
  • Auxiliary hydraulic quick couplers easily connect under pressure for fast, efficient attachment changes.
  • Additional reach and increased dump height result in more efficient load placement and overall performance.
  • Low-profile design provides outstanding forward, rear and side visibility.
  • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
  • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
  • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
  • Large, gas-spring assisted engine cover and over-sized, flush-mounted rear door allows full access on the rear of the machine for servicing and maintenance.
  • Lockable compartments on the rear towers open to reveal the battery on the left and hydraulic tank on the right.
  • Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.
  • Track rollers and idlers are sealed and require no maintenance.
  • Patented tilt-out foot pod allows for best-in-class foot well cleanout and provides perfect access to the fuel tank and other components under the cab.
  • Coded wiring takes the guesswork out of electrical system identification.
Specifications
Overall Operating Height - Fully Raised (mm) 168" (4267)
Height to Hinge Pin - Fully Raised (mm) 128" (3251)
Reach - Fully Raised (mm) 34.5" (876)
Dump Angle - Fully Raised 40.2°
Dump Height - Fully Raised (mm) 98" (2489)
Maximum Rollback Angle - Fully Raised 102.5°
Overall Height at ROPS (mm) 82.8" (2103)
Overall Length with Bucket - Standard Counterweight (mm) 144" (3658)
Overall Length without Bucket - Standard Counterweight (mm) 110.8" (2814)
Specified Height (mm) 67.5" (1715)
Reach at Specified Height (mm) 31.1" (790)
Dump Angle at Specified Height 75°
Maximum Rollback Angle at Ground 30°
Carry Position (mm) 7" (179)
Maximum Rollback Angle at Carry Position 33°
Digging Position - Below Ground (mm) -0.3" (7.6)
Angle of Departure with Standard Counterweight 30.4°
Ground Clearance (mm) 13.3" (343)
Track Gauge (mm) 51.7" (1313)
Track Shoe Width (mm) 12.6" (320)
Crawler Base (mm) 54.8" (1392)
Overall Width - Less Bucket (mm) 64.4" (1636)
Bucket Width (mm) 65.9" (1674)
Clearance Radius - Front with Bucket (mm) 91.4" (2322)
Clearance Radius - Rear with Standard Counterweight (mm) 62.1" (1577)
Maximum Rollback at Specified Height 66.8°
Angle of Approach 90°
Grouser Height (mm) 1" (25)
Capacity
Operating Capacity at 35% of Tipping Load (kg) 1750 lbs. (794)
Operating Capacity at 50% of Tipping Load (kg) 2500 lbs. (1134)
Tipping Load (kg) 5000 lbs. (2268)
Operating Weight (kg) 8605 lbs. (3903)
Engine
Make/Model Yanmar/4TNV98C-NMSL Tier IV
Type 4-Stroke Naturally Aspirated
Displacement (L) 203 cu.in. (3.319)
Cylinders 4
Net Horsepower (kW) @ 2500 rpm 68.4 hp (51)
Peak Torque (Nm) @ 1600 rpm 179 ft-lbs. (242.7)
Oil Pump Capacity (L) 11 qts. (10.4)
Alternator Voltage/Amperage 14V/95A
Track Drives
Drawbar Pull / Tractive Effort (kN) 11,840 lbs. (5371)
Track Type Rubber
Track Rollers 4
Roller Type Steel
Track Width (mm) 12.6" (320)
Ground Pressure (bar) 6.2 psi (0.43)
Forces
Bucket Breakout - Tilt Cylinder (kg) 5189 lbs. (2354)
Bucket Breakout - Lift Cylinder (kg) 4840 lbs. (2195)
Ground Speed - Single Speed (km/hr) 5.1 mph (8.2)
Ground Speed - Two Speed (km/hr) 7.5 mph (12.1)
Volume
Fuel Tank (L) 24 gal. (91)
Hydraulic Reservoir Tank (L) 11.0 gal. (41.6)
Coolant Capacity (L) 3.5 gal. (13.3)
Hydraulics
Auxiliary Hydraulic Flow - Rated Speed (L/min) 18.5 gpm (70)
High-Flow Hydraulic Flow - Rated Speed (L/min) 34 gpm (128.8)
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Reduction

Construction Machinery Online

Language Options

E-Mail: webmaster@global-ce.com TEL: 0086-10-52895329 FAX:0086-10-84673349
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China