Mustang Manitou 1650R Skid Loaders

Mustang Manitou 1650R Skid Loaders

Lift Height 119" (3023)
Capacity 1,650 lbs. (748)
Power 68.4 hp (51) @ 2500

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 
  • Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
  • A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
  • Standard high-back adjustable seat and optional air-ride suspension seat or mechanical suspension seat provide enhanced, all-day comfort.
  • Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
  • Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
  • Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.
  • Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.
  • Three control options include T-Bar, Joystick, and Hand/Foot.
  • All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.
  • Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.
  • Automatic glow plug heating system provides superior cold-weather starting.
  • After treatment meets all Tier IV requirements through proven technology.
  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
  • Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
  • 42% more visibility with new low-profile lift arm.
  • Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.
  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
  • All-new swing-out cooler provides improved access to the engine bay area.
  • Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
  • All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position.
  • Removable plate for easy cleanout of foot area inside ROPS/FOPS
Dimensions
A. Overall Operating Height - Fully Raised (mm) 152.6" (3876)
B. Height to Hinge Pin - Fully Raised (mm) 118.8" (3018)
C. Overall Height to top of ROPS (mm) 76.7" (1948)
D. Ground Clearance to Chassis (mm) 6.3" (160)
E. Overall Length with 54" Bucket (mm) 122.1" (3101)
F. Overall Length without Bucket (mm) 93.9" (2385)
G. Wheelbase (mm) 38.9" (988)
H. Dump Reach at Full Height (mm) 22.8" (579)
I. Rollback at Ground Level 28°
J. Dump Angle 38°
K. Overall Width - Less Bucket (mm) 63.2" (1605)
L. Bucket Width (mm) 61.5" (1562)
M. Clearance Circle - Rear (mm) 57.7" (1466)
N. Clearance Circle - Front w/o Bucket (mm) 45.4" (1153)
O. Clearance Circle - Front w/Bucket (mm) 57.7" (1466)
P. Seat to Ground Height (mm) 35.6" (904)
Q. Rollback at Full Height 99°
R. Dump Height (mm) 93.7" (2380)
S. Departure Angle 21°
Standard Tire Size 10.00 x 16.5 HD
Engine
Make Yanmar
Model 4TNV98C-NMS2 Tier IV
Gross Power (kW) @ 2500 rpm 69.3 hp (51.7)
Net Power (kW) @ 2500 rpm     68.4 hp (51)
Maximum Torque (Nm) @ 1820 rpm 178 ft.-lbs. (241)
Displacement (L) 201.4 cu.in. (3.3)
Hydraulics
Auxiliary Hydraulics - Standard (L/min) 18.9 gpm (71.4)
High-Flow Hydraulics - Optional (L/min) N/A
Reservoir Capacity (L) 11 gal. (41.6)
Electrical
Battery (CCA) 12-volt (950)
Starter (kW) 12-volt (3.0)
Alternator 100-amp
Capacities/Weight
Rated Operating Capacity (kg) 1650 lbs. (748)
With optional counterweight (kg) 1800 lbs. (816.5)
Fuel Tank (L) 16.5 gal. (62.5)
Travel Speed - Maximum (km/hr) 7.8 mph (12.6)
Operating Weight - Approximate (kg) 6122 lbs. (2777)

Construction Machinery Online

Language Options

E-Mail: webmaster@global-ce.com TEL: 0086-10-52895329 FAX:0086-10-84673349
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China