Mustang Manitou 1050RT Track Loaders

Mustang Manitou 1050RT Track Loaders

Lift Height 109" (2769 mm)
Capacity 1,050 lbs (476 kg)
Power 35 hp (26 kW) @ 2800

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 
  • Tier IV-certified Yanmar diesel engines provide 35 hp (26 kW)
  • The welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
  • Optional rear bumper/counterweight provides additional protection.
  • Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work
  • Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
  • Standard Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
  • Multi-purpose LCD display provides easy readout during operation.
  • Easy Manager Telematics
  • Cab forward design enhances the view to the bucket.
  • Level II FOPS is standard equipment.
  • Optional air-ride seat deliver outstanding comfort and precision control by moving with the operator during operation.
  • Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
  • Optional pressurized sealed cab enclosure, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.
  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine warranty, parts and service are handled through dealership servicing in conjunction with Mustang parts and service support.
  • Standard auxiliary hydraulics are designed to handle virtually every flow/high performance attachment.
  • New cast-iron pump design delivers efficient flow at higher temperatures.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Direct engine coupling provides high operating efficiency.
  • Power track drive motors deliver superior pushing power.
  • Auxiliary hydraulic quick couplers for fast, efficient attachment changes.
  • Additional reach and increased dump height result in more efficient load placement and overall performance.
  • Low-profile design provides outstanding forward, rear and side visibility.
  • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
  • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
  • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
  • Large, gas-spring assisted engine cover and over-sized, allows full access on the rear of the machine for servicing and maintenance.
  • Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.
  • Track rollers and idlers are sealed and require no maintenance.
  • Coded wiring takes the guesswork out of electrical system identification.
Specifications
Overall Operating Height - Fully Raised (mm) 143.7" (3650)
Height to Hinge Pin - Fully Raised (mm) 109" (2769)
Reach - Fully Raised (mm) 26.5" (673.1)
Dump Angle - Fully Raised 38°
Dump Height - Fully Raised (mm) 84" (2134)
Maximum Rollback Angle - Fully Raised 102°
Overall Height at ROPS (mm) 71.5" (1816)
Overall Length with Bucket - w/o Counterweight (mm) 117.5" (2985)
Overall Length without Bucket - w/o Counterweight (mm) 88.9" (2258)
Specified Height (mm) 57.7" (1466)
Reach at Specified Height (mm) 39" (991)
Dump Angle at Specified Height 72°
Maximum Rollback Angle at Ground 32°
Carry Position (mm) 5" (127)
Maximum Rollback Angle at Carry Position 32°
Digging Position - Below Ground (mm) 0 (0)
Angle of Departure with Standard Counterweight 35°
Ground Clearance (mm) 7.5" (191)
Track Gauge (mm) 40.9" (1039)
Crawler Base (mm) 50.5" (1283)
Overall Width - Less Bucket (mm) 50.8" (1290)
Bucket Width (mm) 54" (1372)
Clearance Radius - Front with Bucket (mm) 73" (1854)
Clearance Radius - Rear without Counterweight (mm) 50.8" (1290)
Capacity
Operating Capacity at 35% of Tipping Load (kg) 1,050 lbs. (476)
Operating Capacity at 50% of Tipping Load (kg) 1,500 lbs. (680)
Operating Weight (kg) 4,720 lbs. (2141)
Engine
Make/Model Yanmar/4TNV88C-KMS
Type 4-Stroke Naturally Aspirated
Displacement (L) 100 cu.in. (1.64)
Cylinders 4
Gross Horsepower (kW) @ 2800 rpm 35 hp (26)
Peak Torque (Nm) @ 1820 rpm 80 ft-lbs. (109)
Alternator Voltage/Amperage 12V/55A
Track Drives
Track Type Rubber
Track Rollers 3
Roller Type Steel
Track Width (mm) 9.8" (250)
Ground Speed - Single Speed (km/h) 6.3 mph (10.1)
Forces
Bucket Breakout - Tilt Cylinder (kg) 4230 lbs. (1919)
Bucket Breakout - Lift Cylinder (kg) 5060 lbs. (2295)
Ground Speed - Single Speed (km/hr) 6.5 mph (10.5)
Ground Speed - Two Speed (km/hr) 10.0 mph (16.1)
Volume
Fuel Tank (L) 9.5 gal. (36)
Hydraulic Reservoir Tank (L) 8 gal. (30)
Coolant Capacity (L) 1.75 gal. (6.62)
Hydraulics
Auxiliary Hydraulic Flow - Rated Speed (L/min) 14.5 gpm (55)
High-Flow Hydraulic Flow - Rated Speed (L/min) 28.28 gpm (195)
Battery
Battery Volts 12 V
Cold Cranking Amps at 0° F (-18° C) 800 CCA
Sound & Vibration
Sound Power (Environmental) 101 dB(A)
Operator Ear 85 dB(A) 

Construction Machinery Online

Language Options

E-Mail: webmaster@global-ce.com TEL: 0086-10-52895329 FAX:0086-10-84673349
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China