Power | 55.7 hp (41.5) @ 1900 |
---|---|
Digging Depth | 14' 4.4" (4380) |
Operating Weight | 18,136 lbs. (8225) |
Engine | |
Make | Yanmar |
Model | 4TNV98C-WBV Tier IV |
Type | Diesel |
Displacement (L) | 202.5 cu.in. (3.32) |
Gross Power (kW) @ rpm | 56.9 hp (42.4) @ 2000 |
Net Power (kW) @ rpm | 55.7 hp (41.5) @ 1900 |
Fuel Tank (L) | 30.4 gal. (115) |
Fuel Consumption (L/hr) | 1.9 gal./hr (7.2) |
Hydraulics | |
Pumps | 2 variable, 2 gear |
Flow Rate (L/min) | 56.7 gpm (214.5) |
Working Pressure (bar) | 3,699 psi (255) |
Swing System Pressure (bar) | 3,481 psi (240) |
Oil Cooler | Standard |
Hydraulic Tank (L) | 15.9 gal. (60) |
Undercarriage & Slewing System | |
Travel Speed - dual (km/hr) | 1.6/2.8 mph (2.5/4.5) |
Gradability | 20° |
Track Type / Width (mm) | Rubber / 17.7″ (450) |
No. of rollers per Side (track/idle) | 5/1 |
Undercarriage Length (mm) | 9'5.8" (2890) |
Track Length on Ground (mm) | 8′ 2.4″ (2500) |
Ground Clearance (mm) | 15.4″ (390) |
Ground Pressure - Cab/Canopy (kPa) | 5.2 psi (35.8) |
Slew Speed | 9 rpm |
Maximum Drawbar Pull (kg) | 14,500 lbs. (6577) |
Maximum Bucket Breakout (kg) with quick coupler | 11,332 lbs. (5140) |
Maximum Bucket Breakout (kg) without quick coupler | 14,286 lbs. (6480) |
Maximum Arm Digging Force (kg) with quick coupler | 8,356 lbs.(3790) |
Maximum Arm Digging Force (kg) without quick coupler | 9,171 lbs. (4160) |
Dimensions | |
Operating Weight with Canopy (kg) | N/A |
Operating Weight with Cab (kg) | 18,136 lbs. (8225) |
A. Max. Digging Depth (mm) | 14′ 4.4″ (4380) |
B. Max. Vertical Wall Digging Depth (mm) | 12′ 10.3″ (3920) |
C. Max. Reach at Ground Level (mm) | 23′ 5.1″ (7140) |
D. Transport Length (mm) | 21′ 2.3″ (6460) |
E. Undercarriage Length (mm) | 9′ 5.8″ (2890) |
F. Max. Digging Height (mm) | 23′ 9.4″ (7250) |
G. Max. Dump Height (mm) | 15′ 2.7″ (4640) |
H. Minimum Front Swing Radius (mm) | 8′ 11.1″ (2720) |
I. Transport Height (mm) | 8′ 9.9″ (2690) |
J. Blade Below Ground (mm) | 1′ 6.9″ (480) |
K. Overall Base Width (mm) | 7′ 5.4″ (2270) |
L. Track Width (mm) | 1′ 5.7″ (450) |
M. Ground Clearance (mm) | 15.4″ (390) |
N. Parallel Offset Right (mm) | 2′ 0.4″ (620) |
O. Parallel Offset Left (mm) | 2′ 9.1″ (840) |
P. Rear End Swing Radius (mm) | 3′ 8.7″ (1135) |
Q. Boom Swing Angle - Left | 57° |
R. Boom Swing Angle - Right | 60° |
Max. Dig Depth with 8ft. (2.5 m) Flat Bottom | 13′ 5″ (4100) |
Dozer Blade | |
Width - extended / retracted (mm) | 7' 5″ (2260) |
Height (mm) | 17.7″ (450) |
Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China