Global-CE > Crawler Loader > Mustang ManitouCrawler Loader > Mustang Manitou 2550RT Track Loaders

Mustang Manitou 2550RT Track Loaders

Lift Height	128" (3251 mm)
Capacity	2,550 lbs (1157 kg)
Power	74.3 hp (55.4 kW) @ 2500

Send Inquiry

*Subject:
*Purchase Time:
*Content:	Mustang Manitou 2550RT Track Loaders floor price
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number:	- -

Feature Parameter

Tier IV-certified Deutz diesel engines provide 74.3 hp (55.4 kW)
Rated operating capacity at 35% of 2550 lbs (1157 kg), which can safely pick-up and operate to it's full potential.
Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
243 ft-lbs (330 Nm) of useful torque to assist the engine power output.
Optional counterweight/bumper can gain extra tipping capacity while offering increased rear protection.
Class-leading lift breakout force and high tilt breakout force give you the power needed to break out concrete slabs, frozen piles of dirt or remove tree stumps.

The hydraulic-pilot controls are mounted to the seat, so they move with the operator that gives a true 1:1 proportional control over the drive system.
All-New seat-mounted pilot control system - redesigned cab mount the controls to the seat, providing added leg room and less arm fatigue during operation.
Hydraloc™system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, open the door or switches off the ignition.
Standard, selectable 2-speed drive motors, horn and backup alarm.
Pilot Hydraulic transmission with direct engine coupling delivers operating efficiency while our actuation valve technology keeps the power flowing. This feature monitors and adjusts the hydrostatic drive pump to produce the ideal tractive effort.
Easy to use, multi-function display incorporates all warning & operation lights and machine configuration screens. Single button allows for simple scrolling and selection of various display functions
Optional HydraGlide™ system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.

The IdealAccess™ Door is a patented design featuring a low clearance door that delivers cab-to-canopy versatility and easy access.
Level II ROPS/FOPS provides the highest level of safety protection for an operator in a roll over or falling object situation.
Our all new seat-mounted pilot control system has redesigned the cab by mounting the controls to the seat. This provides added leg room and less arm fatigue during operation.
Tilt out foot feature allows for best-in-class foot well clean out and provides easy access to the fuel tank and other components under the cab.
Excellent sight lines from all sides for safe and precise placement of loads and reduced jobsite incidents. A high-mounted seat provides an excellent vantage point to the attachment and cutting-edge.
New "glove friendly", weather proof push style buttons with an automotive design and feel

Utilizing automatic regeneration and no fuel additives the Tier IV Deutz Turbo Diesel Engine is simpler to maintain and a better overall value.
Dedicated, welded chassis w/ Flex steel coupler is custom built to aid in superior weight distribution, which enhances stability, grading, tractive effort, and ride control.
Engine visually alerts operators to any issues with the Engine ECU, Coolant, Oil Pressure, Engine Air Filter
Radiator & Hydraulic Oil Cooler will extend the life of the oil, thereby extending the life of the engine since towing and high stress can be damaging.
Increased fuel capacity leads to less downtime on the jobsite and quicker turnaround on projects.
To ensure more protection, we have included vandalism lock provisions on the battery, engine cover, fuel cap, hydraulic tank, rear door and toolbox

IdealTrax™ Industry Exclusive Automatic Track Tensioning system eliminates weekly tension checks and costly track replacements. Tracks are automatically tensioned when the engine is started and during operation. Tension is release when the engine is shut off.
Power track drive motors deliver superior pushing power against the competition.
Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
Hyrdaglide™ Ride Control system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.
Standard selectable self-leveling hydraulic lift keeps the bucket level throughout the raise/lift cycle and can be turned on and off by a switch in the cab.
Offering 37.7 gpm (142.7 L/pm) of standard high aux high flow to power a wide variety of High Flow EDGE attachments

Radical Lift design offers enhanced performance in excavating, grading and digging below grade applications. Due to the radial lift path, the maximum reach is greater at the middle of the lift height.
Additional reach and increased dump height result in more efficient load placement and overall performance.
Low-profile design provides outstanding forward, rear and side visibility.
Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.

IdealTrax™ Industry Exclusive Automatic Track Tensioning system eliminates the need for manually tensioning the tracks on the loader before operation, saving valuable time on the jobsite.
Central Sealed Fuse Location Easily Accessible in rear of machine
Remote mounted engine oil filter, fuel filter and water separator all mounted on the left side of the machine for easy access for service. Belly-pan clean out is now 2X the size of previous models, resulting in slightly lower ground clearance.
Electrical harnesses all marked with indicators for mounting in place by indicated positions, for more reliability
Digital display provides quick responses to possible errors and codes on the machine.
Easy Manager System is a simple and flexible tool that optimizes operational monitoring of your equipment whatever the number and your business!

Parameter

Specifications
Overall Operating Height - Fully Raised (mm)	168" (4267)
Height to Hinge Pin - Fully Raised (mm)	128" (3251)
Reach - Fully Raised (mm)	34.5" (876)
Dump Angle - Fully Raised	41°
Dump Height - Fully Raised (mm)	98" (2489)
Maximum Rollback Angle - Fully Raised	102.5°
Overall Height at ROPS (mm)	83.1" (2111)
Overall Length with Bucket - Standard Counterweight (mm)	157.8" (4008)
Overall Length without Bucket - Standard Counterweight (mm)	126.8" (3221)
Specified Height (mm)	67.7" (1720)
Reach at Specified Height (mm)	31.3" (795)
Dump Angle at Specified Height	66.8°
Maximum Rollback Angle at Ground	30°
Carry Position (mm)	8.2" (208)
Maximum Rollback Angle at Carry Position	31.6°
Digging Position - Below Ground (mm)	+0.5" (13)
Angle of Departure with Standard Counterweight	25°
Ground Clearance (mm)	12.3" (313)
Track Gauge (mm)	51.7" (1313)
Track Shoe Width (mm)	17.7" (450)
Crawler Base (mm)	61.5" (1562)
Overall Width - Less Bucket (mm)	69.5" (1765)
Bucket Width (mm)	83.9" (2131)
Clearance Radius - Front with Bucket (mm)	98.4" (2499)
Clearance Radius - Rear with Standard Counterweight (mm)	70.7" (1796)
Maximum Rollback at Specified Height	66.8°
Angle of Approach	90°
Grouser Height (mm)	1" (25)
Capacity
Operating Capacity at 35% of Tipping Load (kg)	2,550 lbs. (1157)
Operating Capacity at 50% of Tipping Load (kg)	3,643 lbs. (1652)
Tipping Load (kg)	7,286 lbs. (3305)
Operating Weight (kg)	11,600 lbs. (5260)

Engine
Make/Model	Deutz/ TD 3.6 L4 Tier IV
Type	4-Stroke Turbo
Displacement (L)	221 cu.in. (3.621)
Cylinders	4
Net Horsepower (kW) @ 2500 rpm	70.7 hp (52.7) @ 2300
Peak Torque (Nm) @ 1600 rpm	243 ft.-lbs. (330) @ 1600
Oil Pump Capacity (L)	11 qts. (10.4)
Alternator Voltage/Amperage	12V/120A
Track Drives
Drawbar Pull / Tractive Effort (kN)	12,453 lbs. (5649)
Track Type	Rubber
Track Rollers	5
Roller Type	Steel
Track Width (mm)	17.7″ (450)
Ground Pressure (bar)	5.2 psi (0.36)
Forces
Bucket Breakout - Tilt Cylinder (kg)	8,384 lbs. (3803)
Bucket Breakout - Lift Cylinder (kg)	7,437 lbs. (3373)
Ground Speed - Single Speed (km/hr)	5.3 mph (8.5)
Ground Speed - Two Speed (km/hr)	7.5 mph (12.1)
Volume
Fuel Tank (L)	32 gal. (121.1)
Hydraulic Reservoir Tank (L)	13.8 gal. (52.2)
Coolant Capacity (L)	6.1 gal. (23.1)
Hydraulics
Auxiliary Hydraulic Flow - Rated Speed (L/min)	29.07 gpm (110)
High-Flow Hydraulic Flow - Rated Speed (L/min)	37.7 gpm (142.7)
Transmission Pump Type	Axial Piston
Motor Type	Axial Piston with Planetary Reduction