Lovol TE254F(flat floor) Tractor

1. Integral type flat floor, side-mounted transmission control, suspended pedal,beautiful shape and driving comfort;
2. Optional safety frame or heating cab;
3. Optional EPAIV engine in order to meet different emission requirement area;
4. Double-acting clutch, 8+8 shuttle type shiftgear,with working efficiently;
5.Optional synchronizer shuttle-type shiftgear, lightness control and  flexible and reliable;
6. Hydraulic steering,front drive axle of puncturing fuel cylinder, steering control and light and flexible;
7.Provide EC,EPA,GOST certification model.

Drive type	4*4
Overall dimension(L * W * H)	3453*1440*2495 (safety frame) 3453*1440*2335 (Cab)
Wheelbase (mm)	1639
Track(front/rear)	1215/960-1460
Track(front/rear) regulating method	Fixed/stepless
Min.Ground clearance(mm)	270
Min.operating weight (kg)	1639
Counterweight (max)(front/rear)	80/124
Gears(forward/reverse/creeper)	8+8/16+4
Theoretical speed of each gear(forward/reverse)	1.72-26.02/2.25-10.39；1.72-26.02/1.61-24.24；
Engine
Brand	Laidong, Jiangdong, lijia
Engine type	Vertical Type, water-cooling, four-stroke diesel engine
Intake mode	Natural intake
Number of cylinders	3
Bore	85
Stroke	90
Displacement(L)	1.53
Engine rated power kW@rpm	18. 8
Rated speed	2350
Air cleaner type	Dry or wet type
Type of cooling system	Water-cooled
Max. Torque@ revolving speed (rpm)	≥88/1650±100
Specific fuel consumption at rated conditions (g/kW.h)	≤278
Fuel tank capacity (L)	32
Steering brake system
Type of steering system	Hydraulic
Type of steering gear	Cycloid orbitrol steering gear
Type of braking system	Shoe type
Transmission system
Clutch type	Double action
Gearbox type	Two-axis mechanical gearbox
Gearbox shift mode	Shift sleeve +sliding gear
Type of central transmission	Spiral bevel gear type
Final transmission mode (front/rear)	Built-in type, single-stage spur gear
Walking system
Frame type	Frameless
Working device
Type of hydraulic suspension system	Open-center, separated type
Type of linkage	Three point rear linkage
Linkage classes	Class 0 or class I
Lift capacity(610mm point))(kN)	5.2
Regulating mode	Positioning control and floating control
Type of PTO shaft	Non-independent type
The number of PTO shaft splines	6 splines/8splines
Outer diameter of PTO shaft spline	φ35/φ38
PTO shaft speed	540/760 or 540/1000
Hydraulic system
Hydraulic output flow (L/min)	26