Liebherr LPS 550 portal slewing crane

Liebherr LPS 550 portal slewing crane

Lifting capacity (max.) 208 t
Jib length 58 m
Total weight 540 t
Hoisting/lowering max. 120 m/min

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

With an outreach of 54 metres, the LPS 550 is the ideal portal crane for handling bulk cargoes in the Capesize ship class. For container handling ships of the Post-Panamax class are the optimal working environment for the LPS 550. The rail-mounted portal solution can also manage general cargoes and heavy-duty lifting up to 144 tonnes.

Stage IV / Tier 4 final engine

The synchronisation of the winches is monitored and optimised by the four-rope grab control.

Hydrostatic drive

Closed hydraulic loops are used for all main functions such as lifting, turning and luffing. The crane operator benefits from extremely precise control, the service personnel benefit from a minimum number of components and the operating company benefits from reduced fuel consumption.

Pull cylinder

The pull cylinder over the boom offers many advantages: no collision with swinging load, no buckling of the cylinder and full protection of the piston rod in park position.

4-chord boom

The four struts (lattice design) of the boom provide maximum stability and handle the sideways pull better than alternative boom designs. This results in a longer service life.

Lighting

Operation without a loss of productivity is also possible when it is dark. High-performance LED headlights at the boom and tower provide optimal lighting.

Slewing mechanism

The LHM 550 has three slewing mechanisms connected in parallel. The loads for the slewing ring are reduced to a minimum.

Enclosed tower design

The enclosed design of the tower gives the crane operator secure and weather-protected access to the tower cab.

Glass fibre reinforced plastic

The machine housing panels are made from glass fibre reinforced plastic. The advantages include low weight and resistance to rust.

Horizontal load path

During luffing the load always moves along the horizontal load path.

Hoist mechanism

The lifting and lowering movements up to the maximum load capacity are effected steplessly, i.e. without changing gears. The lifting speed is up to 120 metres per minute.

Cooling

The speed of the special Howden coolers is automatically adapted to cooling requirements. As a result, diesel consumption and noise levels are reduced to a minimum and the service life is maximised.

Paintwork

To defy the rough maritime environmental conditions, the standard paintwork comprises a primer coat, an intermediate coat and a top coat.

Litronic crane control

The control system of the mobile harbour crane range, which was developed by Liebherr, focuses on precision, safety and productivity. Obtain a detailed overview here.

Machine housing concept

The single-storey slewing platform houses the drive unit, slewing mechanisms and hoist mechanisms, the control cabinet room and the alternator. All components are easily accessible for maintenance work.

Emergency descent

The emergency descent leads from the cab along the tower to the ground. If the conventional descent is not accessible, the operator can get to safety at any time using the emergency descent.

Round tower design

The round tower design minimises damage caused by torsion. Forces are evenly distributed to the steel structure and the slewing ring. As a result, the service life of the crane is increased significantly.

Control cabinet room

All electric and electronic components used satisfy military standards. External environmental conditions have no impact on the functionality. The entire system was developed for the maritime environment with temperatures from -40°C to +80°C.

Slack rope protection

A slack rope protection device is mounted on the winch frame. The winding on the winch is effected evenly, and the hoist rope is always kept taut.

Service network

Like all maritime cranes from Liebherr, our mobile harbour crane can rely on a dense service network worldwide. This ensures short downtimes and a quick response.

Tower cab position

Optimal views for the operator. The forward-mounting position of the tower cab with 70% glass (safety glass) offers the driver a comprehensive visibility range.

Accessibility

Regular servicing maintains the efficiency of the crane. So maintenance work can be carried out quickly, the accessibility of the relevant components is to the fore. This reduces downtimes.

Lifting capacity (max.) 144 t
Min. radius 11 m
Jib length 54 m
Total weight 439 t
Container rows max. 18
Max. ship width bulk 62 m
Max. ship width scrap 48 m
Material handling capacity bulk 1,500 t/h
Engine power 725 kW
Hoisting/lowering max. 120 m/min
Slewing max. 1.60 rpm
Luffing max. 85 m/min
Mobility rail mounted
Fields of application Container handling / Scrap handling / Bulk handling / Heavy lift / General cargo operation
Max. load bulk 90 t
Lifting height max. 45 m

Liebherr Machinery Service (Shanghai) Co. Ltd.

Name : Liebherr

Service Tel : +1 757 928 2505

E-mail : Crawler.Cranes.USA@liebherr.com

Web Site : http://www.liebherr.com/

Address : 4100 Chestnut Ave / P.O. Drawer O. Newport News, VA, 23607 United States of America

Construction Machinery Online

Language Options

E-Mail: webmaster@global-ce.com TEL: 0086-10-52895329 FAX:0086-10-84673349
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China