Komatsu PC290LC-11 MID-SIZE EXCAVATORS

Komatsu PC290LC-11 MID-SIZE EXCAVATORS

BucketCapacityMax 2.13
BucketCapacityMin 0.76
Horsepower 196 @ 2050 rpm
OperatingWeightMax 72091
OperatingWeightMin 70702

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

Komatsu Auto Idle Shutdown

Komatsu auto idle shutdown automatically shuts the engine down after idling for a set period of time to reduce unnecessary fuel consumption and exhaust emissions. The amount of time before the engine is shutdown can be easily programmed from 5 to 60 minutes.

Fuel Consumption

Reduced by 5%

Heavy Duty Undercarriage and long reach

The PC290LC-11 utilizes a PC360 undercarriage and a heavy long life 11,464 lb counterweight to deliver excellent stability. A long arm with large bore cylinders give the PC290LC-11 a long reach.

Arm rest with simple height adjustment function

A knob and plunger on the armrests allows easy height adjustment without the use of tools.

Switchable Display Modes

The main screen display mode can be changed by pressing the pressing the F3 key.

Operator Identification Function

An operator identification ID can be set up for each operator, and used to manage operation information of individual machines using KOMTRAX data. Data sent from KOMTRAX can be used to analyze operation status by operator as well as by machine.

Engine

Model
Komatsu SAA6D107E-3*
Type
Water-cooled, 4-cycle, direct injection
Aspiration
Komatsu variable geometry turbocharged, aftercooled, cooled EGR
Number of cylinders
6
Bore 107 mm 4.21''
Stroke 124 mm 4.88''
Piston displacement 6.69 ltr 408 in³
Horsepower:

SAE J1995 : Gross 159 kW 213 HP
ISO 9249/SAE J1349 : Net 147 kW 196 HP
Rated rpm
2050 rpm
Fan drive type
Mechanical
Governor
All-speed control, electronic.
*EPA Tier 4 Final emissions certified

Hydraulics

Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves

Drives and Brakes

Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 249 kN / 25400 kg 56,000 lb
Gradeability 70% 35°
Maximum travel speed: (Auto-Shift)
High 5.5 km/h 3.4 mph
Mid 4.1 km/h 2.5 mph
Low 3.0 km/h 1.9 mph
Service brake Hydraulic lock
Parking brake Mechanical disc brake

Swing System

Drive method Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 10.5 rpm
Swing torque 8889 kg•m 64,292 ft lbs

Undercarriage

Center frame X-frame
Track frame Box-section
Seal of track Sealed track
Track adjuster Hydraulic
Number of shoes 48 each side
Number of carrier rollers 2 each side
Number of track rollers 8 each side

Coolant & Lubricant Capacity (refilling)

Fuel tank 400 ltr 105.7 U.S. gal
Coolant 36 ltr 9.5 U.S. gal
Engine 23.1 ltr 6.1 U.S. gal
Final drive, each side 8.5 ltr 2.2 U.S. gal
Swing drive 7.2 ltr 1.9 U.S. gal
Hydraulic tank 132 ltr 34.9 U.S. gal
Hydraulic system 250 ltr 66.0 U.S. gal
DEF tank 23.0 ltr 6.07 U.S. gal

Sound Performance

Exterior – ISO 6395 104 dB(A)
Operator – ISO 6396 70 dB(A)

Operating Weight (approximate)

Operating weight, including 6150 mm 20'2" one-piece boom, 3200 mm 10'6" arm, SAE heaped 1.41 m³ 1.85 yd³ backhoe bucket*, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.

Model
Komatsu SAA6D107E-3*
Type
Water-cooled, 4-cycle, direct injection
Aspiration
Komatsu variable geometry turbocharged, aftercooled, cooled EGR
Number of cylinders
6
Bore 107 mm 4.21''
Stroke 124 mm 4.88''
Piston displacement 6.69 ltr 408 in³
Horsepower:

SAE J1995 : Gross 159 kW 213 HP
ISO 9249/SAE J1349 : Net 147 kW 196 HP
Rated rpm
2050 rpm
Fan drive type
Mechanical
Governor
All-speed control, electronic.
*EPA Tier 4 Final emissions certified


Number of selectable working modes
6
Main pump:

Type
Variable displacement piston type
Pumps for
Boom, arm, bucket, swing, and travel circuits
Maximum flow 479 ltr/min 126.5 U.S. gal/min
Supply for control circuit
Self-reducing valve
Hydraulic motors:

Travel
2 x axial piston motor with parking brake
Swing
1 x axial piston motor with swing holding brake
Relief valve setting:

Implement circuits 380 kgf/cm²/ 37.3 MPa 5,400 psi
Travel circuit 380 kgf/cm² / 37.3 MPa 5,400 psi
Swing circuit 295 kgf/cm²/ 28.9 MPa 4,190 psi
Pilot circuit 33 kgf/cm² / 3.2 MPa 470 psi
Hydraulic cylinders:

Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 140 mm x 1300 mm x 100 mm 5.5" x 51.2" x 3.9"
Arm / 1 150 mm x 1635 mm x 110 mm 5.9" x 64.3" x 4.3"
Bucket / 1 140 mm x 1009 mm x 100 mm 5.5" x 39.7" x 3.9"

Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 249 kN / 25400 kg 56,000 lb
Gradeability 70% 35°
Maximum travel speed: (Auto-Shift)
High 5.5 km/h 3.4 mph
Mid 4.1 km/h 2.5 mph
Low 3.0 km/h 1.9 mph
Service brake Hydraulic lock
Parking brake Mechanical disc brake

Drive method Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 10.5 rpm
Swing torque 8889 kg•m 64,292 ft lbs

Center frame X-frame
Track frame Box-section
Seal of track Sealed track
Track adjuster Hydraulic
Number of shoes 48 each side
Number of carrier rollers 2 each side
Number of track rollers 8 each side

Fuel tank 400 ltr 105.7 U.S. gal
Coolant 36 ltr 9.5 U.S. gal
Engine 23.1 ltr 6.1 U.S. gal
Final drive, each side 8.5 ltr 2.2 U.S. gal
Swing drive 7.2 ltr 1.9 U.S. gal
Hydraulic tank 132 ltr 34.9 U.S. gal
Hydraulic system 250 ltr 66.0 U.S. gal
DEF tank 23.0 ltr 6.07 U.S. gal

Exterior – ISO 6395 104 dB(A)
Operator – ISO 6396 70 dB(A)

Shoes 700 mm 28"
Operating Weight 30570 kg 67,395 lb
Ground Pressure 0.54 kg/cm² 7.71 psi
Shoes 800 mm 31.5''
Operating Weight: 30950 kg 68,233 lb
Ground Pressure 0.48 kg/cm² 6.83 psi
Shoes 850 mm 33.5"
Operating Weight: 31141 kg 68,654 lb
Ground Pressure 0.45 kg/cm² 6.47 psi
Component Weights
Arm including bucket cylinder and linkage
3200 mm 10'6" arm assembly 1432 kg 3,157 lb
3500 mm 11'6" arm assembly 1504 kg 3,316 lb
One piece boom including arm cylinder
6150 mm 20'2" boom asssembly 2448 kg 5,397 lb
Boom cylinders x 2 231 kg 509 lb
Counterweight 5510 kg 12,148 lb
1.41 m³ 1.85 yd³ bucket - 48" width 1088 kg 2,399 lb

Construction Machinery Online

Language Options

E-Mail: webmaster@global-ce.com TEL: 0086-10-52895329 FAX:0086-10-84673349
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China