Global-CE > Haul Trucks > KOMATSUHaul Trucks > Komatsu HD785-7 MECHANICAL TRUCKS
Komatsu HD785-7 MECHANICAL TRUCKS

Komatsu HD785-7 MECHANICAL TRUCKS

Capacity 100.3
Horsepower 1,200 @1900 rpm
MaxGrossVehicleWeight 366000

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

Variable Horsepower Control

Both in Power and Economy modes, the VHPC system detects whether the truck is loaded or not loaded and selects the optimum horsepower setting mode, providing both high production and low fuel consumption.

Power mode

Makes the best use of horsepower to attain optimal production. This mode is suitable for operation in job sites including uphill travel with a load where throughput takes top priority.

Economy mode

Sets the maximum horsepower at a lower level to reduce fuel consumption. The machine maintains sufficient power for normal operation in this mode.

Fully Automatic Transmission

The transmission is configured with 7 forward and 2 reverse gears. Fully automatic control is applied to all forward gears and an optimum gear is automatically selected according to the travel speed and engine speed. To reduce fuel consumption, the shifting point is automatically selected depending on the acceleration of the machine.

AP-FOUR

The HD785-7 is equipped with AP-FOUR that applies retarding force on all four wheels. This reduces the possibility of tire-lock and enables effective use of retarder capacity, allowing stable downhill travel. The machine descends slopes smoothly and comfortably without machine body pitching since retarding force on the front and rear wheels is controlled independently.
• Retarder Absorbing Capacity: 1092 kW 1,464 HP (continuous descent)
• Brake Surface Area (rear):
Front total: 37467 cm² 5,807 in²
Rear total: 72414 cm² 11,224 in²

Auto Retard Speed Control

ARSC allows the operator to simply set the downhill travel speed and go down slopes at a constant speed. This allows the operator to concentrate on steering. The speed can be set at increments of 1 km/h 0.6 MPH per click (±5 km/h 3.1 MPH of setting speed adjustment) to match the optimum speed for the slope. The retarder cooling oil temperature is constantly monitored and the descent speed is automatically reduced, if necessary.

Ideal Driving Position Settings

The 5-way adjustable operator seat and the tilt-telescopic steering column provide an optimum driving posture for increased driving comfort and more control over machine operation. The suspension seat dampens vibrations transmitted from the machine and reduces operator fatigue. A 78 mm 3" wide seat belt is provided as standard equipment.

Advanced K-ATOMiCS

The electronically controlled all clutch modulation system, “K-ATOMiCS”, optimizes the clutch engagement oil pressure at every gear. This system optimizes the clutch lock-up process for smoother shifting with minimal torque shock.

The Macpherson Strut-Type Front Suspension

The MacPherson-type independent suspension is utilized on the front wheels. This linkage arrangement allows the front wheel to follow the undulation of the road surface smoothly, realizing excellent riding comfort.

High-Rigidity Frame

Front support is integrated with the frame. The frame rigidity has been substantially increased. As a result, flexural rigidity and torsional rigidity, which are indicators of drivability and ride quality, are significantly improved.

Advanced monitoring system

The Komatsu advanced monitoring system identifies maintenance items, reduces diagnostic times, indicates oil and filter replacement hours and displays abnormality codes. This monitor system helps to maximize machine production time.

Rear axles Full-floating
Final drive type Planetary gear
Ratios:
Differential 3.357
Planetary 6.333

Capacity
Struck 52.3 yd³ 40 m³
Heaped (2:1, SAE) 78.5 yd³ 60 m³
Payload 100.3 U.S. tons 91.0 metric tons
Material 400 Brinell hardness high tensile strength steel
Structure V-shape body with V-bottom
Material thickness:
Bottom 0.75" 19 mm
Front 0.47" 12 mm
Sides 0.35" 9 mm
Target area (inside length x width) 23'2"x 17'1" 7065 mm x 5200 mm
Dumping angle 48°
Height at full dump 33'1" 10080 mm
Heating Exhaust heating

Brakes meet ISO 3450 standard.

Service brakes:
Front Fully hydraulic control, oil-cooled multiple-disc type
Rear Fully hydraulic control, oil-cooled multiple-disc type
Parking brake Spring applied, multiple-disc type(actuates on all wheels)
Retarder Oil-cooled, multiple-disc front and rear brakes act as retarder
Secondary brake Manual pedal operation. When hydraulic pressure drops below the rated level, parking brake is automatically actuated.
Brake surface
Front 5,807 in² 37467 cm²
Rear 11,224 in² 72414 cm²

Model Komatsu SAA12V140E-3
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled
Number of cylinders 12
Bore x Stroke 5.51" x 6.50" 140 mm x 165 mm
Piston displacement 1,860 in³ 30.48 ltr
Horsepower
SAE J1995 Gross 1,200 HP Gross 895 kW
ISO 9249 / SAE J1349 Net 1,178 HP Net 879 kW
Rated rpm 1,900 rpm
Fan drive type. Mechanical
Maximum torque 3,747 lb ft 518 kg•m
Fuel system Direct injection
Governor Electronic control
Lubrication system
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and pre-cleaned, with dust indicator

Hoist cylinder Twin, 2-stage telescopic type
Relief pressure 2,990 psi 20.6 MPa / 210 kg/cm²
Hoist time
Raise 13 sec
Lower 14 sec

Type Box-sectioned structure Integral front bumper

Fuel tank 345.6 U.S. Gal 1308 ltr.
Engine oil 34.1 U.S. Gal 129 ltr.
Torque converter, transmission and retarder cooling 54.2 U.S. Gal 205 ltr.
Differentials 36.2 U.S. Gal 137 ltr.
Final drives (total) 33.8 U.S. Gal 128 ltr.
Hydraulic system 46.2 U.S. Gal 175 ltr.
Brake control 9.5 U.S. Gal 36 ltr.
Suspension (total) 24.6 U.S. Gal 93 ltr.
Engine coolant 74.8 U.S. Gal 283 ltr

Type Fully hydraulic power steering with two double-acting cylinders
Supplementary steering Electro-hydraulic motor
Minimum turning radius 33'2" 10.1 m
Maximum steering angle 41°

Effective cylinder stroke:

Front suspension 12.6" 320 mm
Rear suspension 5.0" 127 mm
Rear axle oscillation
6.5°


Standard tire 27.00 R49

Torque converter 3-elements, 1-stage, 2-phase
Transmission Full-automatic, planetary-shaft type
Speed range 7 speeds forward and 2 reverse (RH, RL)
Lockup clutch. Wet, multiple-disc clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive, direct drive (lockup)
Shift control Electronic shift control with automatic clutch modulation in all gear
Maximum travel speed 40.4 mph 65 km/h

Empty weight 158,800 lb 72000 kg
Max. gross vehicle weight 366,000 lb 166000 kg
Not to exceed max. gross vehicle weight, including options, fuel and payload.
Weight distribution (Empty):
Front axle 47%
Rear axle 53%
Weight distribution (Loaded):
Front axle 31.5%
Rear axle 68.5%

Construction Machinery Online

Language Options

E-Mail: webmaster@global-ce.com TEL: 0086-10-52895329 FAX:0086-10-84673349
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China