Global-CE > Bulldozer > KOMATSUBulldozer > Komatsu D51PX-24 SMALL DOZERS
Komatsu D51PX-24 SMALL DOZERS

Komatsu D51PX-24 SMALL DOZERS

BladeCapacityMax 4.4
BladeCapacityMin 4.4
Horsepower 131 @ 2200 rpm
OperatingWeightMax 31438
OperatingWeightMin 31438

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

High Capacity High WearResistant HST Dozer Blade

The D51PX PAT high-capacity (4.4 yd3), high wear-resistant blade can increase production.

Production increased by up to 15%

HST with Electronic Control

The D51EX/PX-24 is equipped with Komatsu-designed HST that allows for Quick-Shift or variable speed selection. The HST consists of dual-path closed-circuits, with two variable displacement piston pumps and two variable displacement travel motors. Hydrostatic steering eliminates steering clutches and brakes, providing smooth, powerful turns. Fully electronic control provides complete automatic shifting and enables smooth control. Engine speed is controlled using an electronic fuel control dial.

Komatsu New Emission Regulations compliant Engine

SAA4D107E-3 EPA Tier 4 Final emissions certified engine has a water cooled variable geometry turbocharged and aftercooled 4.5 liter diesel engine which provides up to 13% increased fuel efficiency.

Parallel Link Undercarriage System

Komatsu's PLUS rotating bush design provides less downtime, longer wear, and with up to 40% lower undercarriage maintenance costs, than conventional undercarriage. Rotating bushings eliminate the cost and downtime for bushing turns, and strengthened rollers and links increase wear life up to two times. With PLUS, individual links can be replaced with common track tools.

PAT Dozer with Adjustable Pitch

A high wear-resistant power angle, power tilt dozer blade with adjustable blade pitch is available on the D51EX/PX-24. The hydraulic blade tilt and angling function expands versatility and productivity in a variety of applications.

Swing Up Fan

The D51EX/PX-24 utilizes a swing-up fan with a gas strut-assisted lift system to provide easy access to the (side-by-side) radiator, oil cooler and charge air cooler. The hydraulic fan is reversible to help keep the radiator cores clean and simplify maintenance.

Unrivaled Blade Visibility

The D51EX/PX-24 incorporates Komatsu's superslant nose design. Komatsu's innovative design provides excellent blade visibility for improved machine control and increased efficiency and productivity.

Engine

Model Komatsu SAA4D107E-3*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable geometry, water-cooled, turbocharged,
air-to-air aftercooled
Number of cylinders 4
Bore x stroke 107 mm x 124 mm 4.21" x 4.88"
Piston displacement 4.5 ltr 275 in³
Governor All-speed, electronic
Horsepower:
SAE J1995 - Gross 99 kW 133 HP
ISO 9249 / SAE J1349 - Net 98 kW 131 HP
Hydraulic fan at maximum speed - Net 91 kW 122 HP
Rated rpm
2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow

*EPA Tier 4 Final emissions certified

Final Drive

In-shoe mounted, axial-piston-type travel motors, with integrated two-stage planetary gear reduction. Compact, in-shoe mount reduces risk of damage by debris. Bolt-on sprocket ring with triple labyrinth seal design.

Hydraulic System

Closed-Center Load Sensing System (CLSS) designed for precise
and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic
tank. Piston-type hydraulic pump with capacity (discharge flow) of
97 ltr/min 26 U.S. gal/min at rated engine rpm.
Relief valve setting 27.4 MPa / 280 kg/cm² 3,983 psi
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 90 mm 3.5"
Blade tilt / 1 100 mm 4"
Blade angle / 2 90 mm 3.5"
Hydraulic oil capacity (refill):
Power angle tilt dozer 64 ltr 17 U.S. gal
Control valves:
3-spool control valve for power angle tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper.
Positions:
Ripper lift Raise, hold and lower

Hydrostatic Transmission

Dual-path, hydrostatic transmission provides infinite speed changes up to 9.0 km/h 5.6 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch. 

Model Komatsu SAA4D107E-3*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable geometry, water-cooled, turbocharged,
air-to-air aftercooled
Number of cylinders 4
Bore x stroke 107 mm x 124 mm 4.21" x 4.88"
Piston displacement 4.5 ltr 275 in³
Governor All-speed, electronic
Horsepower:
SAE J1995 - Gross 99 kW 133 HP
ISO 9249 / SAE J1349 - Net 98 kW 131 HP
Hydraulic fan at maximum speed - Net 91 kW 122 HP
Rated rpm
2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow

Closed-Center Load Sensing System (CLSS) designed for precise
and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic
tank. Piston-type hydraulic pump with capacity (discharge flow) of
97 ltr/min 26 U.S. gal/min at rated engine rpm.
Relief valve setting 27.4 MPa / 280 kg/cm² 3,983 psi
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 90 mm 3.5"
Blade tilt / 1 100 mm 4"
Blade angle / 2 90 mm 3.5"
Hydraulic oil capacity (refill):
Power angle tilt dozer 64 ltr 17 U.S. gal
Control valves:
3-spool control valve for power angle tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper.
Positions:
Ripper lift Raise, hold and lower

Travel speed
(quick shift mode)
Forward Reverse
1st 0–3.4 km/h
0–2.1 mph
0–4.1 km/h
0–2.5 mph
2nd 0–5.6 km/h
0–3.5 mph
0–6.5 km/h
0–4.0 mph
3rd 0–9.0 km/h
0–5.6 mph
0–9.0 km/h
0–5.6 mph
Travel speed
(variable mode)
0–9.0 km/h
0–5.6 mph
0–9.0 km/h
0–5.6 mph

Tractor weight: Including ROPS cab, U frame for Power Angle Tilt (PAT)
dozer, rated capacity of lubricant, coolant, full fuel tank,
operator, and standard equipment.
D51PX-24
12550 kg
27,668 lb
Operating weight: Including Power Angle Tilt (PAT) dozer, ROPS cab, operator,
standard equipment, rated capacity of lubricant, hydraulic
control unit, coolant, and full fuel tank.
D51PX-24
14260 kg
31,438 lb

Coolant 37 ltr 9.8 U.S. gal
Fuel tank 270 ltr 71.3 U.S. gal
Engine oil 16ltr 4.2 U.S. gal
Hydraulic tank 64 ltr 17 U.S. gal
Final drive (each side) 5.5ltr 1.5 U.S. gal
Diesel Exhaust Fluid (DEF) tank 20.5 ltr 5.42 U.S. gal

Minimum turning radius: 2.6 m

102"


Suspension Rigid type
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Sealed & lubricated track Track tension easily adjusted w/grease gun
Number of track rollers (each side) 7
Type of shoes (standard) Single grouser
Number of shoes (each side) 44
Grouser height 55 mm 2.2"
Shoe width (standard) 710mm 28"
Ground contact area 38980 cm² 6,042 in²
Ground pressure
(with dozer, ROPS cab)
0.32 kgf/cm² / 32.1 kPa 4.66 psi
Track gauge 1880 mm 6'2"
Length of track on ground
2745 mm 9'0"

Construction Machinery Online

Language Options

E-Mail: webmaster@global-ce.com TEL: 0086-10-52895329 FAX:0086-10-84673349
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China