Global-CE > Crawler Excavators > HitachiCrawler Excavators > Hitachi Construction / Production Excavator ZX350LC-6
Hitachi Construction / Production Excavator ZX350LC-6

Hitachi Construction / Production Excavator ZX350LC-6

Lifting capacity, along undercarriage
Operating Weight 35 198 kg
Bucket capacity (m³) SAE, PCSA Heaped
Gross power

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

Engine

  • The Isuzu EPA Final Tier 4 (FT4)/EU Stage IV engine delivers fuel-efficient and reliable performance. Fuel pressure, timing and volume are precisely regulated by electronic control for efficient combustion with Isuzu’s common-rail fuel injection system.

  • The pressurized fuel system improves fuel injector operation, and the fuel recirculation system helps prevent fuel gelling in cold climates – so you can maintain maximum productivity.

  • Auto-idle, which reduces engine speed when hydraulics aren’t in use, and auto-shutdown contribute to fuel efficiency.

Durable structure and undercarriage

  • ZX250LC-6_ZX300LC-6_MainframeThick-plate, single-sheet mainframe, box-section track frames and industry-exclusive, double-seal swing bearing deliver rock-solid durability.

  • With large idlers, rollers, and strutted track links, the sealed and lubricated undercarriage is built for the long haul.

  • Reinforced D-channel side frames provide maximum cab and component impact protection.

  • Tungsten-carbide coated wear surfaces protect the critical bucket-to-arm joint.

  • Oil-impregnated bushings enhance durability and extend lube intervals to 500 hours for the arm-and-boom joint and 100 hours for the bucket joint.

Hydraulics

  • Stay on schedule with generous swing torque, digging force, and lift capacity.

  • Whatever your grade system, Topcon, Trimble or Leica, Hitachi offers a grade reference-ready package that reduces installation time by half.

Simple controls

  • ZX250LC-6_ZX300LC-6_LCD_MonitorMulti-language LCD monitor and rotary dial provide intuitive access to machine info and functions. Just turn and tap to select work modes, monitor maintenance intervals, check diagnostic codes, and set cab temperature. Control oil flow and toggle between dig and thumb modes with a programmable thumb attachment mode.

  • ZX250LC-6_ZX300LC-6_LeverErgonomically correct short-throw pilot levers provide smooth, precise control with less effort. Pushbuttons in the right lever allow control of auxiliary hydraulic flow for attachments. Optional sliding switch provides proportional speed control, giving you full command from your fingertips.

  • It’s not always about brute force. Unmatched metering and smooth multifunction operation provide plenty of finesse and precision, too.

Comfortable cab

  • ZX130-5_ZX160LC-5_ZX180LC-5_ZX210_lightsOptional cab and right-side boom lights provide extra illumination to extend your production.

  • ZX250LC-6_ZX300LC-6_visibilityGet unobstructed all-around visibility thanks to a new hood design paired with a wide expanse of front, side, and overhead glass and mirrors.

  • ZX350LC-6_ZX380LC-6_cabOperators get maximum support from a sculpted mechanical suspension high-back seat. Seat has 318 mm (12.5 in.) of travel, sliding together or independent of the joystick console. For even more comfort, opt for the air-suspension heated seat.

  • Automatic, high-velocity, bi-level climate-control system with automotive-style adjustable louvers helps keep the glass clear, the cab comfortable and the operator productive.

Easy to maintain

  • ZX250LC-6_ZX300LC-6_lubeCentralized lube banks place zerks within easy reach, making greasing less messy and time consuming.

  • ZX250LC-6_ZX300LC-6_filtersEngine oil, fuel, and hydraulic pilot oil filters are all located on the same side at ground level for easy servicing.

  • ZX250LC-6_ZX300LC-6_handrailUpper-structure handrails provide added safety when servicing the engine compartment, and a larger hood gives you better engine accessibility.

  • Our field-proven technology is simple and efficient, employing cooled exhaust gas recirculation (EGR), a diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR). An improved piston design allows particulate matter to be burned in cylinder, so there’s no need for a diesel particulate filter (DPF).

  • A battery disconnect switch, located in the rear door behind the cab, is easily accessible and extends battery life.

  • The FT4 engine solution does not require a diesel particulate filter (DPF), saving service time and lowering operating costs.

ZXLink™

  • The ZX350LC-6 is standard equipped with Hitachi’s ZXLink™ system, giving you the power to optimize your operation and maximize your profits. With the support of your dealer you can use your data to reduce idling time as well as maximize productivity and uptime. Without ever leaving your seat you’ll have access to fleet location, functions, hours, fuel consumption, alerts and other essential machine data. You can also view location and alert information in the field from your iOS or Android devices.

Grade Guidance

Manage grades in real-timeOptional integrated Grade Guidance developed in cooperation with Topcon increases efficiency on your jobs. Manage grades in real-time with a 2D or 3D system. Your machine arrives ready to work with the system installed, measured and calibrated. It’s a one-stop-shop solution supported by our reliable dealer network.


Emission RatingTier 4
Number Of Cylinders (Per Engine)6
Displacement7.8 ltr
475 Inches³
Rated speed1900 rpm
Engine Output - Net202 kW
271 hp
Number Of Carrier Rollers - Each Side2
Number Of Track Rollers - Each Side8
Track Shoe Width800 mm
32 inches
Transport Length Mono Boom11290 mm
37 ft ft/in
Transport Height - Maximum3600 mm
11 ft 10 in ft/in
Overall Undercarriage Width3390 mm
11 ft 2 in ft/in
Track Length On Ground4050 mm
13 ft 3 in ft/in
Undercarriage Overall Length4940 mm
16 ft 2 in ft/in
Tailswing Radius3600 mm
11 ft 10 in ft/in
Ground Clearance510 mm
20 inches
Width over standard tracks3390 mm
11 ft 2 in ft/in
Track Gauge2590 mm
8 ft 6 in ft/in
Digging Reach - Mono Boom11860 mm
38 ft 11 in ft/in
Ground Level Reach - Mono Boom11670 mm
38 ft 3 in ft/in
Dig Height - Mono Boom10750 mm
35 ft 3 in ft/in
Dump Height - Mono Boom7630 mm
25 ft ft/in
Dig depth - 2.44m / 8'ft flat bottom8040 mm
26 ft 5 in ft/in
Dig Depth - Mono Boom8180 mm
26 ft 10 in ft/in
Fuel Tank630 ltr
166 gallons (US)
Hydraulic Tank180 ltr
48 gallons (US)
Ground Bearing Pressure49.3 kPa
7.15 PSI
Dipper Tearout159 kN
35745 lbf
Operating Weight35090 kg
77360 lbs

Construction Machinery Online

Language Options

E-Mail: webmaster@global-ce.com TEL: 0086-10-52895329 FAX:0086-10-84673349
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China