Rated Operating Capacity at 35% Tipping Load (kg) | 1,650 lbs. (748) |
---|---|
Gross Power (kW) | 68.4 hp (51.0) |
Lift Height (mm) | 119" (3038) |
The Gehl RT210 GEN:3 Compact Track Loader was designed from the ground up...
The extra-large, state-of-the art operator’s station on the RT210 GEN:3 Track Loader is designed for optimal operator comfort resulting in more productivity.
Controls on the RT210 GEN:3 Compact Track Loaders are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.
The RT210 GEN:3 engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.
The RT210 GEN:3 Compact Track Loader hydraulic system is engineered to push more material, lift heavier loads and power demanding attachments.
Serviceability is very important to our customers. The RT210 GEN:3 is sure to exceed your service expectations.
Height to Hinge Pin - Fully Raised (mm) | 128" (3251) |
Make/Model | Yanmar/4TNV98CT-NMSL Tier IV |
Type | 4-Stroke Turbo |
Displacement/Cylinders (L) | 203 cu.in. (3.3)/4 |
Gross Power (kW) @ rpm | 72 hp (53.7) @ 2500 |
Net Power (kW) @ rpm | 70.7 hp (51) @ 2500 |
Peak Torque (Nm) @ rpm | 206 ft.-lbs. (279.3) @ 1700 |
Oil Pump Capacity (L) | 11 qts. (10.4) |
Alternator Voltage/Amperage | 14V/95A |
Auxiliary Hydraulic Flow - Rated Speed (km/hr) | 21.8 gpm (82.5) |
High-Flow Hydraulic Flow - Rated Speed (km/hr) | 35.9 gpm (135.8) |
Transmission Pump Type | Axial Piston |
Motor Type | Axial Piston with Planetary Gear Box Reduction |
Height to Hinge Pin - Fully Raised (mm) | 128" (3251) |
Reach - Fully Raised (mm) | 34.5" (876) |
Dimensions |
|
---|---|
A Overall Operating Height - Fully Raised | 168" |
B Height to Hinge Pin - Fully Raised | 128" |
C Reach - Fully Raised | 34.5" |
D Dump Angle - Fully Raised | 39° |
E Dump Height - Fully Raised | 98" |
F Maximum Rollback Angle - Fully Raised | 102.5° |
G Overall Height at ROPS | 83.1" |
H Overall Length with Bucket - Standard Counterweight | 148.1" |
I Overall Length without Bucket - Standard Counterweight | 116.5" |
J Specified Height | 67.7" |
K Reach at Specified Height | 31.3" |
L Dump Angle at Specified Height | 75° |
M Maximum Rollback Angle at Ground | 30° |
N Carry Position | 8.2" |
O Maximum Rollback Angle at Carry Position | 31.6° |
P Digging Position - Below Ground | +0.6" |
Q Angle of Departure with Standard Counterweight | 29.2° |
R Ground Clearance | 13.2" |
S Track Gauge | 51.7" |
T Track Shoe Width | 17.7" |
U Crawler Base | 58.4" |
V Overall Width - Less Bucket | 69.5" |
W Bucket Width | 73.9" |
X Clearance Radius - Front With Bucket | 94.6" |
Z Clearance Radius - Rear with Standard Counterweight | 64.6" |
Maximum Rollback at Specified Height | 66.8° |
Angle of Approach | 90° |
Grouser Height | 1" |
Capacity |
|
Operating Capacity at 35% Tipping Load | 2,100 lbs. |
Operating Capacity at 50% Tipping Load | 3,000 lbs. |
Tipping Load | 6,000 lbs. |
Operating Weight | 9,890 lbs. |
Engine |
|
Make/Model | Yanmar/4TNV98TCT-NMSL Tier IV |
Type | 4-Stroke Turbo |
Displacement/Cylinders | 203 cu.in./4 |
Gross Power @ rpm | 72 hp @ 2500 |
Net Power @ rpm | 70.7 hp @ 2500 |
Peak Torque @ rpm | 206 ft.-lbs. @ 1700 |
Oil Pump Capacity | 11 qts. |
Alternator Voltage/Amperage | 14V/95A |
Track Drives |
|
Drawbar Pull/Tractive Effort | 11,489 lbs. |
Track Type/Track Rollers/Roller Type | Rubber/5/Steel |
Track Width | 17.7" |
Ground Pressure | 4.7 psi |
Forces |
|
Bucket Breakout - Tilt Cylinder | 6,631 lbs. |
Bucket Breakout - Lift Cylinder | 6,481 lbs. |
Ground Speed - Single Speed | 6.1 mph |
Ground Speed - Two Speed | 8.9 mph |
Volume |
|
Fuel Tank | 24 gal. |
Hydraulic Reservior Tank | 13.8 gal. |
Coolant Capacity | 3.8 gal. |
Hydraulics |
|
Auxiliary Hydraulic Flow - Rated Speed | 21.8 gpm |
Hight-Flow Hydraulic Flow - Rated Speed | 35.9 gpm |
Transmission Pump Type | Axial Piston |
Motor Type | Axial Piston with Planetary Gear Box Reduction |
Electronic System |
|
Battery Volts | 12V |
Cold Cranking Amps at Temperature | 850 CCA @ 0°F |
Dimensions |
|
---|---|
A Overall Operating Height - Fully Raised | 4267 mm |
B Height to Hinge Pin - Fully Raised | 3251 mm |
C Reach - Fully Raised | 876 mm |
D Dump Angle - Fully Raised | 39° |
E Dump Height - Fully Raised | 2489 mm |
F Maximum Rollback Angle - Fully Raised | 102.5° |
G Overall Height at ROPS | 2111 mm |
H Overall Length with Bucket - Standard Counterweight | 3762 mm |
I Overall Length without Bucket - Standard Counterweight | 2959 mm |
J Specified Height | 1720 mm |
K Reach at Specified Height | 795 mm |
L Dump Angle at Specified Height | 75° |
M Maximum Rollback Angle at Ground | 30° |
N Carry Position | 208 mm |
O Maximum Rollback Angle at Carry Position | 31.6° |
P Digging Position - Below Ground | 16 mm |
Q Angle of Departure with Standard Counterweight | 29.2° |
R Ground Clearance | 335 mm |
S Track Gauge | 1313 mm |
T Track Shoe Width | 450 mm |
U Crawler Base | 1483 mm |
V Overall Width - Less Bucket | 1765 mm |
W Bucket Width | 1877 mm |
X Clearance Radius - Front With Bucket | 2403 mm |
Z Clearance Radius - Rear with Standard Counterweight | 1641 mm |
Maximum Rollback at Specified Height | 66.8° |
Angle of Approach | 90° |
Grouser Height | 25 mm |
Capacity |
|
Operating Capacity at 35% Tipping Load | 953 kg |
Operating Capacity at 50% Tipping Load | 1361 kg |
Tipping Load | 2722 kg |
Operating Weight | 4486 kg |
Engine |
|
Make/Model | Yanmar/4TNV98TCT-NMSL Tier IV |
Type | 4-Stroke Turbo |
Displacement/Cylinders | 3.3 L/4 |
Gross Power @ rpm | 53.7 kW @ 2500 |
Net Power @ rpm | 52.7 kW @ 2500 |
Peak Torque @ rpm | 279.3 Nm @ 1700 |
Oil Pump Capacity | 10.4 L |
Alternator Voltage/Amperage | 14V/95A |
Track Drives |
|
Drawbar Pull/Tractive Effort | 5211 kg |
Track Type/Track Rollers/Roller Type | Rubber/5/Steel |
Track Width | 450 mm |
Ground Pressure | 0.32 bar |
Forces |
|
Bucket Breakout - Tilt Cylinder | 3008 kg |
Bucket Breakout - Lift Cylinder | 2940 kg |
Ground Speed - Single Speed | 9.8 km/hr |
Ground Speed - Two Speed | 14.3 km/hr |
Volume |
|
Fuel Tank | 91 L |
Hydraulic Reservior Tank | 52.2 L |
Coolant Capacity | 14.4 L |
Hydraulics |
|
Auxiliary Hydraulic Flow - Rated Speed | 82.5 L/min |
Hight-Flow Hydraulic Flow - Rated Speed | 135.8 L/min |
Transmission Pump Type | Axial Piston |
Motor Type | Axial Piston with Planetary Gear Box Reduction |
Electronic System |
|
Battery Volts | 12V |
Cold Cranking Amps at Temperature | 850 CCA @ -18°C |
Performance |
|
---|---|
All-Tach® Mounting System | Standard |
IdealTrax™ | Exclusive Standard |
Straight Tracking | Standard |
Power-A-Tach® Mounting System | Optional |
Self-Leveling Hydraulic Lift Action | Standard |
Selectable Self-Leveling Lift Action | Optional |
Two-Speed Drive | Standard |
12-Volt Battery | Standard |
Engine |
|
Engine Alert System with Error Display | Standard |
Engine Automatic Shutdown System | Standard |
Grid/Manifold Heater Starter Assist | Standard |
Dual-Element Air Cleaner with Indicator | Standard |
Hydraulic System |
|
Auxiliary Hydraulics | Standard |
High-Flow Auxiliary Hydraulics | Optional |
Undercarriage |
|
Elevated Planetary Final Drives | Standard |
Maintenance Free Rollers Each Side | 4 |
Single Flange Front/Dual Flange Rear Idlers | Standard |
Rubber Track Undercarriage System | Standard |
Servo-Controlled Hydrostatic Drive | Standard |
Dedicated Undercarriage | Standard |
Structure |
|
Tilt-out Foot Pod | Exclusive Standard |
Back-up Alarm | Standard |
Combination Radiator & Hydraulic Oil Cooler | Standard |
ROPS/FOPS Level II Overhead Guard | Standard |
Anti-Vandalism Lock Provisions | Standard |
Mechanical Lift Cylinder Lock | Standard |
Operator's Station |
|
Pressurized Cab Enclosure with A/C | Optional |
Fold-Up Door | Optional |
Multi-Function Function Display Screen | Standard |
Drive Sensitivity System | Standard |
Electronic Attachment Control - 14-Pin Connector | Optional |
Electro-Hydraulic Joystick Controls | Standard |
Selectable Control Pattern Configuration | Optional |
Variable Speed Control, Selectable On & Off | Optional |
Foot Throttle | Standard |
Full-Suspension Seat | Standard |
Air Suspension Seat | Optional |
Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China