GEHL RT185 Track Loaders

GEHL RT185 Track Loaders

Rated Operating Capacity at 35% Tipping Load (kg) 1,650 lbs. (748)
Gross Power (kW) 68.4 hp (51.0)
Lift Height (mm) 119" (3038)

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

The Gehl RT185 Compact Track Loader was designed from the ground up...

  • Tier IV-certified Yanmar diesel engines provide 69.6 hp (52.1 kW)
  • Designed from the ground up, the welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
  • Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
  • Optional rear bumper/counterweight provides additional protection and towing capability.
  • Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work.
  • Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.

The extra-large, state-of-the art operator’s station on the RT185 Track Loader is designed for optimal operator comfort resulting in more productivity.

  • Cab forward design with optional IdealAccess™ Folding Cab Door.
  • NEW Back up camera is optional equipment.
  • New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort.
  • Deluxe High-Back Cushion Seat - Mechanical Suspension delivers outstanding comfort and precision control by moving with the operator during operation.
  • Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
  • Optional pressurized sealed cab enclosure with heat/AC, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.

Controls on the Gehl RT185 Compact Track Loader are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

  • Adjustable Joystick Pilot controls provides the operator true 1:1 proportional control over the drive system.
  • All-New seat-mounted pilot control system - redesigned cab mount the controls to the seat, providing added leg room and less arm fatigue during operation.
  • Standard Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
  • Standard, selectable 2-speed drive motors, horn and backup alarm.
  • Optional speed control adds ability to tailor machine operating speeds to application, independent of engine rotation.
  • Standard ISO drive pattern.
  • Multi-purpose LCD display provides easy readout during operation.
  • Standard HydraGlide™ system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.
  • Easy Manager Telematics

The RT185 engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.

  • DPF (Diesel Particulated Filter) Technology.
  • Block Heater is an optional feature 
  • Emissions Compliance (EPA/Euro) Tier IV/Stage 3B, 24 gal (91 L) fuel tank along with a 250 hours Oil Change Interval.

The RT185 Compact Track Loader hydraulic system is engineered to push more material, lift heavier loads and power demanding attachments.

  • Standard and optional high-flow auxiliary hydraulics are designed to handle virtually every flow/high performance attachment.
  • New cast-iron pump design delivers efficient flow at higher temperatures.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Pilot Hydraulic transmission with direct engine coupling provides high operating efficiency.
  • Power track drive motors deliver superior pushing power.
  • Auxiliary hydraulic quick couplers easily connect under pressure for fast, efficient attachment changes.
Height to Hinge Pin - Fully Raised (mm) 128" (3251)
Standard Flow Hydraulics - Lift Arm Mounted 21.8 gpm (82.5 L/min)
Optional High Flow Hydraulics - Lift Arm Mounted 32 gpm (128.8 L/min)
Hydraulic Reservoir 18.5 gal (70 L)
System Pressure 3,500 psi (241 bar)
Height to Hinge Pin - Fully Raised (mm) 128" (3251)
Reach - Fully Raised (mm) 34.5" (876)

Dimensions

A  Overall Operating Height - Fully Raised 168"
B  Height to Hinge Pin - Fully Raised 128"
C  Reach - Fully Raised 34.5"
D  Dump Angle - Fully Raised 40.2°
E  Dump Height - Fully Raised 98"
F  Maximum Rollback Angle - Fully Raised 102.5°
G  Overall Height at ROPS 83"
H  Overall Length with Bucket - Standard Counterweight 148"
I  Overall Length without Bucket - Standard Counterweight 114.8"
J  Specified Height 67.5"
K  Reach at Specified Height 31.1"
L  Dump Angle at Specified Height 66.8°
M  Maximum Rollback Angle at Ground 30°
N  Carry Position 8.2"
O  Maximum Rollback Angle at Carry Position 31.6°
P  Digging Position + Above Ground/ - Below Ground +0.9"
Q  Angle of Departure with Standard Counterweight 30.4°
R  Ground Clearance 12.5"
S  Track Gauge 51.7"
T  Track Shoe Width 12.6"
U  Crawler Base 54.8"
V  Overall Width - Less Bucket 64.4"
W  Bucket Width 65.9"
X  Clearance Radius - Front With Bucket 91.4"
Z  Clearance Radius - Rear with Standard Counterweight 65.6"
Maximum Rollback at Specified Height  66.8°
Angle of Approach 90°
Grouser Height 1"

Capacity

Operating Capacity at 35% Tipping Load 1,850 lbs.
Operating Capacity at 50% Tipping Load 2,643 lbs.
Tipping Load 5,286 lbs.
Operating Weight 9,160 lbs.

Engine

Make/Model Yanmar/4TNV98C-NMSL
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 203 cu.in./4
Gross Power @ rpm 69.9 hp @ 2500
Net Power @ rpm 68.4 hp @ 2500
Peak Torque @ rpm 178 ft.-lbs. @ 1625
Oil Pump Capacity 11 qts.
Alternator Voltage/Amperage 14V/100A

Track Drives

Drawbar Pull/Tractive Effort 10,218 lbs.
Track Type/Track Rollers/Roller Type Rubber/4/Steel
Track Width 12.6"
Ground Pressure 6.3 psi

Forces

Bucket Breakout - Tilt Cylinder 5,354 lbs.
Bucket Breakout - Lift Cylinder 5,016 lbs.
Ground Speed - Single Speed 5.9 mph
Ground Speed - Two Speed 8.8 mph

Volume

Fuel Tank 24 gal.
Hydraulic Reservior Tank 11 gal.
Coolant Capacity 3.5 gal.

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed @ rpm 18.5 gpm @ 2500
Hight-Flow Hydraulic Flow - Rated Speed 34 gpm
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear Box Reduction

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 850 CCA @ 0°F

Sound & Vibration

Sound Power 103.0 dB
Operator Ear 82.0 db
Hand/Arm Vibration ≤ 2.73m/s²
Whole Body Vibration ≤ 0.98m/s²

Dimensions

A  Overall Operating Height - Fully Raised 4267 mm
B  Height to Hinge Pin - Fully Raised 3251 mm
C  Reach - Fully Raised 876 mm
D  Dump Angle - Fully Raised 40.2°
E  Dump Height - Fully Raised 2489 mm
F  Maximum Rollback Angle - Fully Raised 102.5°
G  Overall Height at ROPS 2103 mm
H  Overall Length with Bucket - Standard Counterweight 3754 mm
I  Overall Length without Bucket - Standard Counterweight 2921 mm
J  Specified Height 1715 mm
K  Reach at Specified Height 790 mm
L  Dump Angle at Specified Height 66.8°
M  Maximum Rollback Angle at Ground 30°
N  Carry Position 208 mm
O  Maximum Rollback Angle at Carry Position 31.6°
P  Digging Position + Above Ground 23 mm
Q  Angle of Departure with Standard Counterweight 30.4°
R  Ground Clearance 318 mm
S  Track Gauge 1313 mm
T  Track Shoe Width 320 mm
U  Crawler Base 1392 mm
V  Overall Width - Less Bucket 1636 mm
W  Bucket Width 1674 mm
X  Clearance Radius - Front With Bucket 2322 mm
Z  Clearance Radius - Rear with Standard Counterweight 1666 mm
Maximum Rollback at Specified Height  66.8°
Angle of Approach 90°
Grouser Height 25 mm

Capacity

Operating Capacity at 35% Tipping Load 839 kg
Operating Capacity at 50% Tipping Load 1199 kg
Tipping Load 2398 kg
Operating Weight 4128 kg

Engine

Make/Model Yanmar / 4TNV98C-NMSL
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 3.319 L/4
Gross Power @ rpm 52.1 kW @ 2500
Net Power @ rpm 51 kW @ 2500
Peak Torque @ rpm 241 Nm @ 1625
Oil Pump Capacity 10.4 L
Alternator Voltage/Amperage 14V/100A

Track Drives

Drawbar Pull/Tractive Effort 4635 kg
Track Type/Track Rollers/Roller Type Rubber/4/Steel
Track Width 320 mm
Ground Pressure 0.43 bar

Forces

Bucket Breakout - Tilt Cylinder 2429 kg
Bucket Breakout - Lift Cylinder 2275 kg
Ground Speed - Single Speed 9.5 km/hr
Ground Speed - Two Speed 14.2 km/hr

Volume

Fuel Tank 91 L
Hydraulic Reservior Tank 41.6 L
Coolant Capacity 13.3 L

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed @ rpm 70 L/min @ 2500
Hight-Flow Hydraulic Flow - Rated Speed 128.8 L/min
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear Box Reduction

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 850 CCA @ -18°C

Sounds & Vibration

Sound Power 103.0 dB
Operator Ear 82.0 dB
Hand/Arm Vibration ≤ 2.73 m/s²
Operator Ear ≤ 0.98 m/s²

Performance

All-Tach® Mounting System Standard
IdealTrax™ Exclusive Standard
Straight Tracking Standard
Power-A-Tach® Mounting System Optional
Self-Leveling Hydraulic Lift Action Standard
Selectable Self-Leveling Lift Action Optional
Two-Speed Drive Standard
12-Volt Battery Standard

Engine

Engine Alert System with Error Display Standard
Engine Automatic Shutdown System Standard
Grid/Manifold Heater Starter Assist Standard
Dual-Element Air Cleaner with Indicator Standard

Hydraulic System

Auxiliary Hydraulics Standard
High-Flow Auxiliary Hydraulics Optional

Undercarriage

Elevated Planetary Final Drives Standard
Maintenance Free Rollers Each Side 4
Single Flange Front/Dual Flange Rear Idlers Standard
Rubber Track Undercarriage System Standard
Servo-Controlled Hydrostatic Drive Standard
Dedicated Undercarriage Standard

Structure

Tilt-out Foot Pod Exclusive Standard
Back-up Alarm Optional
Combination Radiator & Hydraulic Oil Cooler Standard
ROPS/FOPS Level II Overhead Guard Standard
Anti-Vandalism Lock Provisions Standard
Mechanical Lift Cylinder Lock Standard

Operator's Station

Pressurized Cab Enclosure with A/C Optional
IdealAccess™ Fold-Up Door Exclusive Standard
Multi-Function Function Display Screen Standard
Hydraulic Pilot Controls Standard
Electronic Attachment Control - 14-Pin Connector Optional
Foot Throttle Standard
Full-Suspension Seat Standard
Air Suspension Seat Optional

Construction Machinery Online

Language Options

E-Mail: webmaster@global-ce.com TEL: 0086-10-52895329 FAX:0086-10-84673349
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China