Global-CE > Crawler Loader > GEHLCrawler Loader > GEHL RT175 GEN:3 Track Loaders

GEHL RT175 GEN:3 Track Loaders

Rated Operating Capacity at 35% Tipping Load (kg)	1,650 lbs. (748)
Gross Power (kW)	68.4 hp (51.0)
Lift Height (mm)	119" (3038)

Send Inquiry

*Subject:
*Purchase Time:
*Content:	GEHL RT175 GEN:3 Track Loaders floor price
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number:	- -

Feature Parameter

Controls on the Gehl RT175 GEN:3 Compact Track Loader are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

Electro-hydraulic joystick controls provide the ultimate in operator comfort and controllability. They are also not affected during cold weather operation.
Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
Standard, selectable 2-speed drive motors, horn and backup alarm.
Optional speed control adds ability to tailor machine operating speeds to application, independent of engine rotation.
Standard ISO drive pattern, optional selectable ISO and dual hand (H-pattern) controls.
Multi-purpose LCD display provides easy readout during operation.
Single button allows simple scrolling and selection of various display functions.
Standard Drive Sensitivity Adjustment offers five settings that change five parameters to suit operator preference, skill and application requirements. Adjustable settings include:
- Joystick Sensitivity
- Position Reaction
- Engine Response
- AntiStall
- Pump Swash Plate Position
The RT175 GEN:3 engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.
- Automatic glow module engine intake heating system provides superior cold-weather starting.
- Engine warranty, parts and service are handled through dealership servicing in conjunction with Gehl parts and service support.
The robust lift-arm on the RT175 GEN:3 Compact Track Loader is designed for optimal strength, visibility and capacity.
- Additional reach and increased dump height result in more efficient load placement and overall performance.
- Low-profile design provides outstanding forward, rear and side visibility.
- Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
- Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
- Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.

Parameter

Height to Hinge Pin - Fully Raised (mm)

128" (3251)

Make/Model	Yanmar/4TNV98C-NMSL Tier 4
Type	4-Stroke Naturally Aspirated
Displacement/Cylinders (L)	203 cu.in. (3.3)/4
Gross Power (kW) @ rpm	69.9 hp (52.1) @ 2500
Net Power (kW) @ rpm	68.4 hp (51) @ 2500
Peak Torque (Nm) @ rpm	179 ft.-lbs. (242.7) @ 1600
Oil Pump Capacity (L)	11 qts. (10.4)
Alternator Voltage/Amperage	14V/95A

Auxiliary Hydraulic Flow - Rated Speed (L/min)	18.5 gpm (70.0)
Hight-Flow Hydraulic Flow - Rated Speed (L/min)	34.0 gpm (128.8)
Transmission Pump Type	Axial Piston
Motor Type	Axial Piston with Planetary Gear Box Reduction

Height to Hinge Pin - Fully Raised (mm)	128" (3251)
Reach - Fully Raised (mm)	34.5" (876)

Dimensions
A Overall Operating Height - Fully Raised	168"
B Height to Hinge Pin - Fully Raised	128"
C Reach - Fully Raised	34.5"
D Dump Angle - Fully Raised	40.2°
E Dump Height - Fully Raised	98"
F Maximum Rollback Angle - Fully Raised	102.5°
G Overall Height at ROPS	83"
H Overall Length with Bucket - Standard Counterweight	144.0"
I Overall Length without Bucket - Standard Counterweight	110.8"
J Specified Height	67.5"
K Reach at Specified Height	31.1"
L Dump Angle at Specified Height	75°
M Maximum Rollback Angle at Ground	30°
N Carry Position	8.2"
O Maximum Rollback Angle at Carry Position	31.6°
P Digging Position - Below Ground	+0.9"
Q Angle of Departure with Standard Counterweight	30.4°
R Ground Clearance	13.3"
S Track Gauge	51.7"
T Track Shoe Width	12.6"
U Crawler Base	54.8"
V Overall Width - Less Bucket	64.4"
W Bucket Width	65.9"
X Clearance Radius - Front With Bucket	91.4"
Z Clearance Radius - Rear with Standard Counterweight	62.1"
Maximum Rollback at Specified Height	66.8°
Angle of Approach	90°
Grouser Height	1"
Capacity
Operating Capacity at 35% Tipping Load	1,750 lbs.
Operating Capacity at 50% Tipping Load	2,500 lbs.
Tipping Load	5,000 lbs.
Operating Weight	8,605 lbs.
Engine
Make/Model	Yanmar/4TNV98C-NMSL Tier IV
Type	4-Stroke Naturally Aspirated
Displacement/Cylinders	203 cu.in./4
Gross Power @ rpm	69.9 hp @ 2500
Net Power @ rpm	68.4 hp @ 2500
Peak Torque @ rpm	179 ft.-lbs. @ 1600
Oil Pump Capacity	11 qts.
Alternator Voltage/Amperage	14V/95A
Track Drives
Drawbar Pull/Tractive Effort	9,917 lbs.
Track Type/Track Rollers/Roller Type	Rubber/4/Steel
Track Width	12.6"
Ground Pressure	6.2 psi
Forces
Bucket Breakout - Tilt Cylinder	5,354 lbs.
Bucket Breakout - Lift Cylinder	5,016 lbs.
Ground Speed - Single Speed	5.3 mph
Ground Speed - Two Speed	7.7 mph
Volume
Fuel Tank	24 gal.
Hydraulic Reservior Tank	11.0 gal.
Coolant Capacity	3.5 gal.
Hydraulics
Auxiliary Hydraulic Flow - Rated Speed	18.5 gpm
High-Flow Hydraulic Flow - Rated Speed	34.0 gpm
Transmission Pump Type	Axial Piston
Motor Type	Axial Piston with Planetary Gear Box Reduction
Electronic System
Battery Volts	12V
Cold Cranking Amps at Temperature	850 CCA @ 0°F

Dimensions
A Overall Operating Height - Fully Raised	4267 mm
B Height to Hinge Pin - Fully Raised	3251 mm
C Reach - Fully Raised	876 mm
D Dump Angle - Fully Raised	40.2°
E Dump Height - Fully Raised	2489 mm
F Maximum Rollback Angle - Fully Raised	102.5°
G Overall Height at ROPS	2103 mm
H Overall Length with Bucket - Standard Counterweight	3658 mm
I Overall Length without Bucket - Standard Counterweight	2814 mm
J Specified Height	1715 mm
K Reach at Specified Height	790 mm
L Dump Angle at Specified Height	75°
M Maximum Rollback Angle at Ground	30°
N Carry Position	208 mm
O Maximum Rollback Angle at Carry Position	31.6°
P Digging Position - Below Ground	23 mm
Q Angle of Departure with Standard Counterweight	30.4°
R Ground Clearance	333 mm
S Track Gauge	1313 mm
T Track Shoe Width	320 mm
U Crawler Base	1392 mm
V Overall Width - Less Bucket	1636 mm
W Bucket Width	1674 mm
X Clearance Radius - Front With Bucket	2322 mm
Z Clearance Radius - Rear with Standard Counterweight	1577 mm
Maximum Rollback at Specified Height	66.8°
Angle of Approach	90°
Grouser Height	25 mm
Capacity
Operating Capacity at 35% Tipping Load	794 kg
Operating Capacity at 50% Tipping Load	1134 kg
Tipping Load	2268 kg
Operating Weight	3903 kg
Engine
Make/Model	Yanmar/4TNV98C-NMSL Tier IV
Type	4-Stroke Naturally Aspirated
Displacement/Cylinders	3.3 L/4
Gross Power @ rpm	52.1 kW @ 2500
Net Power @ rpm	51 kW @ 2500
Peak Torque @ rpm	242.7 Nm @ 1600
Oil Pump Capacity	10.4 L
Alternator Voltage/Amperage	14V/95A
Track Drives
Drawbar Pull/Tractive Effort	4,498 kg
Track Type/Track Rollers/Roller Type	Rubber/4/Steel
Track Width	320 mm
Ground Pressure	0.43 bar
Forces
Bucket Breakout - Tilt Cylinder	2429 kg
Bucket Breakout - Lift Cylinder	2275 kg
Ground Speed - Single Speed	8.5 km/hr
Ground Speed - Two Speed	12.4 km/hr
Volume
Fuel Tank	91 L
Hydraulic Reservior Tank	41.6 L
Coolant Capacity	13.3 L
Hydraulics
Auxiliary Hydraulic Flow - Rated Speed	70.0 L/min
High-Flow Hydraulic Flow - Rated Speed	128.8 L/min
Transmission Pump Type	Axial Piston
Motor Type	Axial Piston with Planetary Gear Box Reduction
Electronic System
Battery Volts	12V
Cold Cranking Amps at Temperature	850 CCA @ -18°C

Performance
All-Tach® Mounting System	Standard
IdeaTrax™	Exclusive Standard
Straight Tracking	Standard
Power-A-Tach® Mounting System	Optional
Self-Leveling Hydraulic Lift Action	Standard
Selectable Self-Leveling Lift Action	Optional
Two-Speed Drive	Standard
12-Volt Battery	Standard
Engine
Engine Alert System with Error Display	Standard
Engine Automatic Shutdown System	Standard
Grid/Manifold Heater Starter Assist	Standard
Dual-Element Air Cleaner with Indicator	Standard
Hydraulic System
Auxiliary Hydraulics	Standard
High-Flow Auxiliary Hydraulics	Optional
Undercarriage
Elevated Planetary Final Drives	Standard
Maintenance Free Rollers Each Side	3
Single Flange Front/Dual Flange Rear Idlers	Standard
Rubber Track Undercarriage System	Standard
Servo-Controlled Hydrostatic Drive	Standard
Dedicated Undercarriage	Standard
Structure
Tilt-out Foot Pod	Exclusive Standard
Back-up Alarm	Standard
Combination Radiator & Hydraulic Oil Cooler	Standard
ROPS/FOPS Level II Overhead Guard	Standard
Anti-Vandalism Lock Provisions	Standard
Mechanical Lift Cylinder Lock	Standard
Operator's Station
Pressurized Cab Enclosure with A/C	Optional
Fold-Up Door	Optional
Multi-Function Function Display Screen	Standard
Drive Sensitivity Adjustment	Standard
Electronic Attachment Control - 14-Pin Connector	Optional
Electro-Hydraulic Joystick Controls	Standard
Selectable Control Pattern Configuration	Optional
Variable Speed Control, Selectable On & Off	Optional
Foot Throttle	Standard
Full-Suspension Seat	Standard
Air Suspension Seat	Optional