GEHL  RT165 Track Loaders

GEHL RT165 Track Loaders

Rated Operating Capacity at 35% Tipping Load (kg) 1,650 lbs. (748)
Gross Power (kW) 68.4 hp (51.0)
Lift Height (mm) 119" (3038)

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

The extra-large, state-of-the art operator’s station on the RT165 Track Loader is designed for optimal operator comfort resulting in more productivity.

  • Cab forward design enhances the view to the bucket.
  • Level II FOPS is standard equipment.
  • New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort.
  • Fully adjustable controls mounted to a standard mechanical suspension seat or an optional air-ride seat deliver outstanding comfort and precision control by moving with the operator during operation.
  • Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
  • Optional pressurized sealed cab enclosure with heat/AC, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.

Controls on the Gehl RT165 Compact Track Loader are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

  • Adjustable Joystick Pilot controls provides the operator true 1:1 proportional control over the drive system. Dual hand controls are optional.
  • All-New seat-mounted pilot control system - redesigned cab mount the controls to the seat, providing added leg room and less arm fatigue during operation.
  • Standard Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
  • Standard, selectable 2-speed drive motors, horn and backup alarm.
  • Optional speed control adds ability to tailor machine operating speeds to application, independent of engine rotation.
  • Standard ISO drive pattern, optional selectable ISO and dual hand (H-pattern) controls.
  • Multi-purpose LCD display provides easy readout during operation.
  • Standard HydraGlide™ system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.
  • Easy Manager Telematics

The RT165 engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.

  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine warranty, parts and service are handled through dealership servicing in conjunction with Gehl parts and service support.

The robust lift-arm on the RT165 Compact Track Loader is designed for optimal strength, visibility and capacity.

  • Additional reach and increased dump height result in more efficient load placement and overall performance.
  • Low-profile design provides outstanding forward, rear and side visibility.
  • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
  • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
  • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
Height to Hinge Pin - Fully Raised (mm) 119.6" (3038)
Make/Model Yanmar/4TNV98C-NMS2 Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders (L) 201.4 cu.in. (3.319 L / 4)
Gross Power (kW) @ rpm 69.9 hp (52.1) @ 2500
Net Power (kW) @ rpm 68.4 hp (51) @ 2500
Peak Torque (Nm) @ rpm 178 ft.-lbs. (241) @ 1625
Oil Pump Capacity (L) 11 qts. (10.4)
Alternator Voltage/Amperage 14V/100A
Auxiliary Hydraulic Flow - Rated Speed (L/min) 18.9 gpm (71.4)
Hight-Flow Hydraulic Flow - Rated Speed (L/min) 28.5 gpm (119)
Transmission Pump Type Axial Piston
Motor Type Radial Piston
Height to Hinge Pin - Fully Raised (mm) 119.6" (3038)
Reach - Fully Raised (mm) 25.3" (641)

Dimensions

A  Overall Operating Height - Fully Raised 157.8"
B  Height to Hinge Pin - Fully Raised 119.6"
C  Reach - Fully Raised 25.3"
D  Dump Angle - Fully Raised 39°
E  Dump Height - Fully Raised 91.7"
F  Maximum Rollback Angle - Fully Raised 98°
G  Overall Height at ROPS 77.5"
H  Overall Length with Bucket - Standard Counterweight 126.2"
I  Overall Length without Bucket - Standard Counterweight 94.2"
J  Specified Height 64.5"
K  Reach at Specified Height 53.9"
L  Dump Angle at Specified Height 70°
M  Maximum Rollback Angle at Ground 28°
N  Carry Position 7.8"
O  Maximum Rollback Angle at Carry Position 28°
P  Digging Position - Below Ground 2.1"
Q  Angle of Departure with Standard Counterweight 28°
R  Ground Clearance 7.25"
S  Track Gauge 53.4"
T  Track Shoe Width 12.6"
U  Crawler Base 49.8"
V  Overall Width - Less Bucket 66.0"
W  Bucket Width 66.0"
X  Clearance Radius - Front With Bucket 77.9"
Z  Clearance Radius - Rear with Standard Counterweight 56.7"
Maximum Rollback at Specified Height  68.6°
Angle of Approach 90°
Grouser Height 1"

Capacity

Operating Capacity at 35% Tipping Load 1,650 lbs.
Operating Capacity at 50% Tipping Load 2,357 lbs.
Tipping Load 4,715 lbs.
Operating Weight 8,020 lbs.

Engine

Make/Model Yanmar/4TNV98C-NMS2 Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 201.4 cu.in./4
Gross Power @ rpm 69.3 hp @ 2500
Net Power @ rpm 68.4 hp @ 2500
Peak Torque @ rpm N/A
Oil Pump Capacity 11 qts.
Alternator Voltage/Amperage 14V/100A

Track Drives

Drawbar Pull/Tractive Effort 9,578 lbs.
Track Type/Track Rollers/Roller Type Rubber/4/Steel
Track Width 12.6"
Ground Pressure - Narrow / Wide 6.5 / 5.2 psi

Forces

Bucket Breakout - Tilt Cylinder 4,230 lbs.
Bucket Breakout - Lift Cylinder 5,060 lbs.
Ground Speed - Single Speed 6.5 mph
Ground Speed - Two Speed 10.0 mph

Volume

Fuel Tank 16.5 gal.
Hydraulic Reservior Tank 11 gal.
Coolant Capacity 3.8 gal.

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed 18.9 gpm
High-Flow Hydraulic Flow - Rated Speed 28.5 gpm
Transmission Pump Type Axial Piston Variable Double Pump
Motor Type Radial Piston Motor w/ Two Speed

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 950 CCA @ 0°F

Dimensions

A  Overall Operating Height - Fully Raised 4008 mm
B  Height to Hinge Pin - Fully Raised 3038 mm
C  Reach - Fully Raised 642 mm
D  Dump Angle - Fully Raised 39°
E  Dump Height - Fully Raised 2329 mm
F  Maximum Rollback Angle - Fully Raised 98°
G  Overall Height at ROPS 1969 mm
H  Overall Length with Bucket - Standard Counterweight 3205 mm
I  Overall Length without Bucket - Standard Counterweight 2393 mm
J  Specified Height 1638 mm
K  Reach at Specified Height 1369 mm
L  Dump Angle at Specified Height 70°
M  Maximum Rollback Angle at Ground 28°
N  Carry Position 198 mm
O  Maximum Rollback Angle at Carry Position 28°
P  Digging Position - Below Ground 2.1 mm
Q  Angle of Departure with Standard Counterweight 28°
R  Ground Clearance 184 mm
S  Track Gauge 1356 mm
T  Track Shoe Width 320 mm
U  Crawler Base 1265 mm
V  Overall Width - Less Bucket 1676 mm
W  Bucket Width 1676 mm
X  Clearance Radius - Front With Bucket 1979 mm
Z  Clearance Radius - Rear with Standard Counterweight 1440 mm
Maximum Rollback at Specified Height  68.6°
Angle of Approach 90°
Grouser Height 25 mm

Capacity

Operating Capacity at 35% Tipping Load 748 kg
Operating Capacity at 50% Tipping Load 1069 kg
Tipping Load 2139 kg
Operating Weight 3638 kg

Engine

Make/Model Yanmar/4TNV98C-NMS2 Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 3.319 L/4
Gross Power @ rpm 51.7 kW @ 2500
Net Power @ rpm 51.0 kW
Peak Torque @ rpm N/A
Oil Pump Capacity 11 L
Alternator Voltage/Amperage 14V/100A

Track Drives

Drawbar Pull/Tractive Effort 4345 kg
Track Type/Track Rollers/Roller Type Rubber/4/Steel
Track Width 320 mm
Ground Pressure 0.45 / 0.36 bar

Forces

Bucket Breakout - Tilt Cylinder 1919 kg
Bucket Breakout - Lift Cylinder 2295 kg
Ground Speed - Single Speed 10.5 km/hr
Ground Speed - Two Speed 16.1 km/hr

Volume

Fuel Tank 62.5 L
Hydraulic Reservior Tank 41.6 L
Coolant Capacity 14.4 L

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed 71.4 L/min
High-Flow Hydraulic Flow - Rated Speed 119 L/min
Transmission Pump Type Axial Piston Variable Double Pump
Motor Type Radial Piston Motor w/ Two Speed

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 950 CCA @ -18°C

Performance

All-Tach® Mounting System Standard
IdeaTrax™ Exclusive Standard
Power-A-Tach® Mounting System Optional
Selectable Self-Leveling Hydraulic Lift Action Optional
Selectable Self-Leveling Lift Action Optional
Two-Speed Drive Standard
12-Volt Battery Standard

Engine

Engine Alert System with Error Display Standard
Engine Automatic Shutdown System Standard
Glowplugs Starts Assist Standard
Dual-Element Air Cleaner with Indicator Standard

Hydraulic System

Auxiliary Hydraulics Standard
High-Flow Auxiliary Hydraulics Optional

Undercarriage

Elevated Planetary Final Drives Standard
Maintenance Free Rollers Each Side 3
Single Flange Front/Dual Flange Rear Idlers Standard
Rubber Track Undercarriage System Standard
Servo-Controlled Hydrostatic Drive Standard

Structure

Back-up Alarm Optional
Combination Radiator & Hydraulic Oil Cooler Standard
ROPS/FOPS Level II Overhead Guard Standard
Anti-Vandalism Lock Provisions Standard
Mechanical Lift Cylinder Lock Standard

Operator's Station

Pressurized Cab Enclosure with A/C Optional
Multi-Function Function Display Screen Standard
Electronic Attachment Control - 14-Pin Connector Optional
Foot Throttle Standard
Full-Suspension Seat Standard
Air Suspension Seat Optional

Construction Machinery Online

Language Options

E-Mail: webmaster@global-ce.com TEL: 0086-10-52895329 FAX:0086-10-84673349
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China