Global-CE > Forklift Loader > GEHLForklift Loader > GEHL RS9-50 GEN:3 Telescopic Handlers
GEHL  RS9-50 GEN:3 Telescopic Handlers

GEHL RS9-50 GEN:3 Telescopic Handlers

Rated Lift Capacity (kg) 6,600 lbs. (2994)
Gross Power (kW) 120 hp (89)
Maximum Lift Height (m) 42' 0" (12.8)

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

The model RS9-50 GEN:3 is built with high quality components, for long life and superior performance.

  • Land 5,000 lbs at 47' 0" high without moving the machine.
  • Additional reach of 50' 0" telescopic boom provides greater work range and material placement ability than competitive 42' 0" or 44' 0" units..
  • Boom tip lift hook option is now available as a factory-installed option or field installed option.
  • Proven welded box-section telescopic boom design maximizes material lift and placement.
  • Cylinder design provides one of the fastest cycle times in the industry.
  • Frame leveling feature adjusts 10-degrees to the left and right, for level performance on uneven terrain.
  • Internal wet disc brakes provide excellent braking and long life.
  • Dual-element air filter protects the engine from airborne contaminants, increasing engine performance and longevity.

The RS9-50 GEN:3 Telescopic Handler features spacious, durable operator stations to maximize comfort and productivity.

  • 44 cubic-foot cab enclosure provides optimal leg room and a spacious operating environment.
  • ROPS/FOPS canopy is standard equipment; ROPS/FOPS enclosed cab is optional.
  • Virtually 360-degree visibility increases safety and operating accuracy.
  • Deluxe high-back seat maximizes operator comfort. Adjustable suspension seat is optional.
  • Side and rear glass is standard equipment.

Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.

  • In 4-wheel steer, the machine has a 13' 8" turning radius for machine positioning on tight job sites..

The RS9-50 GEN:3 Telescopic Handlers provides the power to get work done effectively and efficiently.

  • Dana four-speed power-shift transmission is easy to operate.
  • Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces.

The model RS9-50 GEN:3 has outstanding hydraulic system and control performance.

  • Dual-function, pilot-assisted joystick is standard equipment.
  • Optional tri-function, pilot-assisted joystick allows the operator to set fork tilt and auxiliary function speeds.
  • Boom tip auxiliary hydraulics are standard to power hydraulic operated attachments.
  • Auto-leveling feature keeps loads level when raising/lowering the boom.

Plenty of access points and over-sized covers make service and maintenance on the RS9-50 GEN:3 quick and efficient.

  • Over-sized front cover provides easy access to the hydraulic reservoir and hydraulic pressure ports for service and testing.
  • Side-mounted fuel tank with battery access and an additional storage compartment.
  • Lockable rear-side covers located on both sides of the machine slide out of the way to expose the engine for service.
  • Shorter hoses from main valve to boom provide a compact hose routing, enhancing serviceability.
Max. Lifting Heigh 50' 1" (15.3 m)
Max. Capacity w/ Forks 9,000 lbs. (4,082 kg)
Capacity at Max. Height 5,000 lbs. (2,268 kg)
Max. Outreach 36' 7" (11.1 m)
Max. Forward Capacity 500 lbs. (227 kg)
Engine Brand Cummins QFS 3.8
Engine Power 120 hp (89 kW)
Engine Technology Tier IV
Transmission Dana T13000
Max. Travel Speed 20.1 mpg (32.3 km/h)
Unladen Weight 29.900 lbs. (13,562 kg)
Overall Width 8' 4" (2.53 m)
Overall Length 21' 0" (6.4 m)
Overall Height 8' 6" (2.6 m)
Outside Turning Radius 13' 11" (4.24 m)
Ground Clearance 18" (457 mm)
Fuel Tank Capacity 47 gal. (178 L)
Axle Brand Dana
  • Masonry
  • General Contractor
  • Roofing
  • Events 
  • Road & Bridge Construction
  • Energy - Exploration & Production
Performance
Load Placement
  • 5,000 lbs. lift to 50' 1"
  • 72" of horizontal placement at 47' lift height
  • Lift most masonry loads to four stories
  • Land 5,000 lbs. at 47' on 7th tier of scaffolding
Rough Terrain Ability
  • Great ground clearance at 18"
  • 10 degree chassis leveling left or right
  • Rear oscillating axle
  • Excellent rough terrain capabilities
  • Level machine and loads in all terrains
  • Floats over rough terrain
Versatility
Attachment Variety
  • Standard Carriage & Forks
  • Rotating Carriage & Forks
  • Dual Fork Positioning Carriage & Forks
Safety
Visibility
  • Rear & RH side glass
  • High boom pivot point
  • In frame mounted engine
  • Better visibility
  • Increased backup visibility
  • Increased RH side visibility
Safety
  • 3" seat belt
  • Back up light & brake light
  • Safer operations
Speed Management
  • 4 speed forward & 3 speed reverse
  • Transmission Clutch Cut-Off
  • Better safety on site
  • More power to hydraulics
Ease of Use & Ergonomics
  • Single F-N-R control
  • RH side switch placement
  • Meets different operator needs
  • Move from one RS to another
Turning Radius (m) 13'8" (4.2)
Manufacturer Cummins
Model QSF 3.8 Tier IV
Power (kW) 120 hp (89)
Maximum Travel Speed (km/hr) 19.6 mph (31.5)
Rated Speed 2,500 rpm
Pump Type Gear
Total Capacity (L/min) 41.5 gpm (157)
System Pressure (bar) 3,000 psi (207)
Hydraulic Reservoir Capacity (L) 45 gal. (170)
A Carriages – Masonry, framing and standard carriages available in different widths.
B Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide.
C Fork Shift - 48" (1219 mm) wide.
D Personnel Work Platforms - 180° swing platform and 48” x 50” x 114” (1219 mm x 1270 mm x 2895 mm) platform.
E Swing Carriage – 90° and 180° swing.
F Log and Pipe Grapple - 78" wide.
G Jib Boom - 5' (1.5 m) with winch and 60' (18.3 m) cable.
H Truss Boom - 15' (4.5 m) with optional winch.

Capacities

Lift Capacity 9,000 lbs.
Maximum Lift Height 50'1"
Capacity at Maximum Lift Height 5,000 lbs.
Maximum Forward Reach 36'7"
Capacity at Maximum Forward Reach 500 lbs.

Load Chart

A 6,600/6,600 lbs.
B 6,000/6,600 lbs.
C 5,000/6,000 lbs.
D 4,000/4,000 lbs.
E 3,000/4,000 lbs.
F 2,000/4,000 lbs.
G 1,000/3,000 lbs.

Engine

Manufacturer Cummins
Model QSF 3.8 Tier IV
Power  120 hp
Aspiration Turbocharged
Rated Speed 2,500 rpm

Components

Transmission Dana 4-speed Powershift
Maximum Travel Speed 15.3 mph
Selective Steering 4-Wheel
2-Wheel
Crab
Brakes 4-Wheel Internal Wet-Disc Brake
Parking Brake Spring-Applied, Hydraulic Release (SAHR) on Front Axle
Axle Manufacturer Dana

Hydraulics

Pump Type Gear
Total Capacity  41.5 gpm
System Pressure  3,000 psi
Hydraulic Reservoir Capacity  31 gal.

General Specifications

Approximate Weight 29,900 lbs.
Length - Less Forks 21'0"
Width 8'3"
Ground Clearance 18"
Wheelbase 10'4"
Turning Radius 13'11"
Overall Height 8'6"
Frame Leveling ±10°
Fuel Capacity 47 gal.

Tire Options

13.00 x 24/12 PR
13.00 x 24/12 PR Foam-Filled
13.00 x 24/12 PR - Rock
13.00 x 24 Solid Rubber

Capacities

Lift Capacity 4082 kg
Maximum Lift Height 15.3 m
Capacity at Maximum Lift Height 2268 kg
Maximum Forward Reach 11.1 m
Capacity at Maximum Forward Reach 227 kg

Engine

Manufacturer Cummins
Model QSF 3.8 Tier IV
Power  89 kW
Aspiration Turbocharged
Rated Speed 2500 rpm

Components

Transmission Dana 4-speed Powershift
Maximum Travel Speed 24.6 km/hr
Selective Steering 4-Wheel
2-Wheel
Crab
Brakes 4-Wheel Internal Wet-Disc Brake
Parking Brake Spring-Applied, Hydraulic Release (SAHR) on Front Axle
Axle Manufacturer Dana

Hydraulics

Pump Type Gear
Total Capacity  157 L/min
System Pressure  207 bar
Hydraulic Reservoir Capacity  117.3 L

General Specifications

Approximate Weight 13,562 kg
Length - Less Forks 6.4 m
Width 2.5 m
Ground Clearance 457 mm
Wheelbase 3.1 m
Turning Radius 4.24 m
Overall Height 2.6 m
Frame Leveling ±10°
Fuel Capacity 178 L

Tire Options

13.00 x 24/12 PR
13.00 x 24/12 PR Foam-Filled
13.00 x 24/12 PR - Rock
13.00 x 24 Solid Rubber

Construction Machinery Online

Language Options

E-Mail: webmaster@global-ce.com TEL: 0086-10-52895329 FAX:0086-10-84673349
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China