GEHL RS5-19 GEN:3 Telescopic Handlers|GEHL|Global-CE

Rated Lift Capacity (kg)	6,600 lbs. (2994)
Gross Power (kW)	120 hp (89)
Maximum Lift Height (m)	42' 0" (12.8)

*Subject:
*Purchase Time:
*Content:	GEHL RS5-19 GEN:3 Telescopic Handlers floor price
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number:	- -

Engine

The RS5-19 GEN:3 Telescopic Handler has the power to get work done effectively and efficiently.

Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for repair.
Rexroth 2-speed hydrostatic transmission.
Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces.

The model RS5-19 GEN:3 makes no exceptions when it comes to hydraulic performance.

Pump Type	Gear
Total Capacity (L/min)	20 gpm (83)
System Pressure (bar)	3,350 psi (231)
Hydraulic Reservoir Capacity (L)	18 gal. (68)

Attachments

There is a tool for every job, and the RS5-19 GEN:3 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease.

A	Carriages – Masonry, framing and standard carriages available in different widths.
B	Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide.
C	Fork Shift - 50" (1270 mm) wide.
D	Truss Boom- 5' long.
E	Bucket - Light Material - 71" wide.

Serviceability

The RS5-19 GEN:3 Telescopic Handler has an intelligent design that protects components and provides easy access for routine maintenance.

The engine hood lifts fully out of the way, providing easy access to the battery and engine maintenance
A hinged access door provides easy access to the engine oil drain
Hydraulic oil fill cap is located on the top of the engine compartment for easier access, with a spill guard for extra protection
A protective sleeve over the exhaust pipe increases safety when working on the engine
A dual-element air filter protects the engine from airborne contaminants

Parameter

System Pressure (bar)	3,350 psi (231)
Hydraulic System Total Capacity (L/min)	20 gpm (83)

Manufacturer	Yanmar
Model	4TNV98C Tier IV
Power (kW)	69 hp (50.1)
Maximum Travel Speed (km/hr)	15 mph (24)
Rated Speed	2,500 rpm

Pump Type	Gear
Total Capacity (L/min)	20 gpm (83)
System Pressure (bar)	3,350 psi (231)
Hydraulic Reservoir Capacity (L)	18 gal. (68)

A	Carriages – Masonry, framing and standard carriages available in different widths.
B	Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide.
C	Fork Shift - 50" (1270 mm) wide.
D	Truss Boom- 5' long.
E	Bucket - Light Material - 71" wide.

Capacities
Lift Capacity	5,500 lbs.
Maximum Lift Height	19'1"
Capacity at Maximum Lift Height	3,000 lbs.
Maximum Foward Reach	11'0"
Capacity at Maximum Forward Reach	1,850 lbs.
Maximum Reach Below Grade	0"

Load Chart
A	5,500 lbs.
B	4,000 lbs.
C	3,000 lbs.
D	2,000 lbs.
E	1,850 lbs.

Engine
Manufacturer	Yanmar
Power	69 hp
Aspiration	Natural
Model	4TNV98C Tier IV
Rated Speed	2500 rpm
Components
Transmission	Rexroth 2-speed
Maximum Travel Speed	15 mph
Selective Steering	4-wheel 2-wheel Crab
Brakes	2-Wheel Hydraulically Actuated Internal Wet-Disc Brake
Parking Brake	Spring-Applied, Hydraulic Release (SAHR) on Front Axle
Axle Manufacturer	Dana
Hydraulic System
Pump Type	Gear
Total Capacity	20 gpm
System Pressure	3350 psi
Hydraulic Reservoir Capacity	18 gal.
General Specifications
Approximate Weight	10,000 lbs.
Length	12'4"
Width	5'11"
Ground Clearance	14"
Wheelbase	7'6"
Turning Radius	11'0"
Overall Height	6'4"
Frame Leveling	N/A
Fuel Capacity	17 gal.
Tire Options
12.00 x 16.5 Bias/10 PR
12.00 x 16.5 Bias/10 PR Foam-Filled
12.00 x 16.5 Solid Rubber

Capacities
Lift Capacity	2495 kg
Maximum Lift Height	5.8 m
Capacity at Maximum Lift Height	1361 kg
Maximum Foward Reach	3.4 kg
Capacity at Maximum Forward Reach	840 kg
Maximum Reach Below Grade	0 mm
Engine
Manufacturer	Yanmar
Power	50.1 kW
Aspiration	Natural
Model	4TNV98C Tier IV
Rated Speed	2500 rpm
Components
Transmission	Rexroth 2-speed
Maximum Travel Speed	24 km/hr
Selective Steering	4-wheel 2-wheel Crab
Brakes	2-Wheel Hydraulically Actuated Internal Wet-Disc Brake
Parking Brake	Spring-Applied, Hydraulic Release (SAHR) on Front Axle
Axle Manufacturer	Dana
Hydraulic System
Pump Type	Gear
Total Capacity	76 L/min
System Pressure	231 bar
Hydraulic Reservoir Capacity	68 L
General Specifications
Approximate Weight	4536 kg
Length	3.8 m
Width	1.80 m
Ground Clearance	350 mm
Wheelbase	2.29 m
Turning Radius	3.35 m
Overall Height	1.93 m
Frame Leveling	N/A
Fuel Capacity	64 L
Tire Options
12.00 x 16.5 Bias/10 PR
12.00 x 16.5 Bias/10 PR Foam-Filled
12.00 x 16.5 Solid Rubber