GEHL RT175 GEN:3 Track Loaders

GEHL RT175 GEN:3 Track Loaders

Rated Operating Capacity at 35% Tipping Load (kg) 1,650 lbs. (748)
Gross Power (kW) 68.4 hp (51.0)
Lift Height (mm) 119" (3038)

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

Controls on the Gehl RT175 GEN:3 Compact Track Loader are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

  • Electro-hydraulic joystick controls provide the ultimate in operator comfort and controllability. They are also not affected during cold weather operation.
  • Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
  • Standard, selectable 2-speed drive motors, horn and backup alarm.
  • Optional speed control adds ability to tailor machine operating speeds to application, independent of engine rotation.
  • Standard ISO drive pattern, optional selectable ISO and dual hand (H-pattern) controls.
  • Multi-purpose LCD display provides easy readout during operation.
  • Single button allows simple scrolling and selection of various display functions.
  • Standard Drive Sensitivity Adjustment offers five settings that change five parameters to suit operator preference, skill and application requirements. Adjustable settings include:
    • Joystick Sensitivity
    • Position Reaction
    • Engine Response
    • AntiStall
    • Pump Swash Plate Position

    The RT175 GEN:3 engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.

    • Automatic glow module engine intake heating system provides superior cold-weather starting.
    • Engine warranty, parts and service are handled through dealership servicing in conjunction with Gehl parts and service support.

    The robust lift-arm on the RT175 GEN:3 Compact Track Loader is designed for optimal strength, visibility and capacity.

    • Additional reach and increased dump height result in more efficient load placement and overall performance.
    • Low-profile design provides outstanding forward, rear and side visibility.
    • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
    • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
    • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
Height to Hinge Pin - Fully Raised (mm) 128" (3251)
Make/Model Yanmar/4TNV98C-NMSL Tier 4
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders (L) 203 cu.in. (3.3)/4
Gross Power (kW) @ rpm 69.9 hp (52.1) @ 2500
Net Power (kW) @ rpm 68.4 hp (51) @ 2500
Peak Torque (Nm) @ rpm 179 ft.-lbs. (242.7) @ 1600
Oil Pump Capacity (L) 11 qts. (10.4)
Alternator Voltage/Amperage 14V/95A
Auxiliary Hydraulic Flow - Rated Speed (L/min) 18.5 gpm (70.0)
Hight-Flow Hydraulic Flow - Rated Speed (L/min) 34.0 gpm (128.8)
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear Box Reduction
Height to Hinge Pin - Fully Raised (mm) 128" (3251)
Reach - Fully Raised (mm) 34.5" (876)

Dimensions

A  Overall Operating Height - Fully Raised 168"
B  Height to Hinge Pin - Fully Raised 128"
C  Reach - Fully Raised 34.5"
D  Dump Angle - Fully Raised 40.2°
E  Dump Height - Fully Raised 98"
F  Maximum Rollback Angle - Fully Raised 102.5°
G  Overall Height at ROPS 83"
H  Overall Length with Bucket - Standard Counterweight 144.0"
I  Overall Length without Bucket - Standard Counterweight 110.8"
J  Specified Height 67.5"
K  Reach at Specified Height 31.1"
L  Dump Angle at Specified Height 75°
M  Maximum Rollback Angle at Ground 30°
N  Carry Position 8.2"
O  Maximum Rollback Angle at Carry Position 31.6°
P  Digging Position - Below Ground +0.9"
Q  Angle of Departure with Standard Counterweight 30.4°
R  Ground Clearance 13.3"
S  Track Gauge 51.7"
T  Track Shoe Width 12.6"
U  Crawler Base 54.8"
V  Overall Width - Less Bucket 64.4"
W  Bucket Width 65.9"
X  Clearance Radius - Front With Bucket 91.4"
Z  Clearance Radius - Rear with Standard Counterweight 62.1"
Maximum Rollback at Specified Height  66.8°
Angle of Approach 90°
Grouser Height 1"

Capacity

Operating Capacity at 35% Tipping Load 1,750 lbs.
Operating Capacity at 50% Tipping Load 2,500 lbs.
Tipping Load 5,000 lbs.
Operating Weight 8,605 lbs.

Engine

Make/Model Yanmar/4TNV98C-NMSL Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 203 cu.in./4
Gross Power @ rpm 69.9 hp @ 2500
Net Power @ rpm 68.4 hp @ 2500
Peak Torque @ rpm 179 ft.-lbs. @ 1600
Oil Pump Capacity 11 qts.
Alternator Voltage/Amperage 14V/95A

Track Drives

Drawbar Pull/Tractive Effort 9,917 lbs.
Track Type/Track Rollers/Roller Type Rubber/4/Steel
Track Width 12.6"
Ground Pressure 6.2 psi

Forces

Bucket Breakout - Tilt Cylinder 5,354 lbs.
Bucket Breakout - Lift Cylinder 5,016 lbs.
Ground Speed - Single Speed 5.3 mph
Ground Speed - Two Speed 7.7 mph

Volume

Fuel Tank 24 gal.
Hydraulic Reservior Tank 11.0 gal.
Coolant Capacity 3.5 gal.

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed 18.5 gpm
High-Flow Hydraulic Flow - Rated Speed 34.0 gpm
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear Box Reduction

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 850 CCA @ 0°F

Dimensions

A  Overall Operating Height - Fully Raised 4267 mm
B  Height to Hinge Pin - Fully Raised 3251 mm
C  Reach - Fully Raised 876 mm
D  Dump Angle - Fully Raised 40.2°
E  Dump Height - Fully Raised 2489 mm
F  Maximum Rollback Angle - Fully Raised 102.5°
G  Overall Height at ROPS 2103 mm
H  Overall Length with Bucket - Standard Counterweight 3658 mm
I  Overall Length without Bucket - Standard Counterweight 2814 mm
J  Specified Height 1715 mm
K  Reach at Specified Height 790 mm
L  Dump Angle at Specified Height 75°
M  Maximum Rollback Angle at Ground 30°
N  Carry Position 208 mm
O  Maximum Rollback Angle at Carry Position 31.6°
P  Digging Position - Below Ground 23 mm
Q  Angle of Departure with Standard Counterweight 30.4°
R  Ground Clearance 333 mm
S  Track Gauge 1313 mm
T  Track Shoe Width 320 mm
U  Crawler Base 1392 mm
V  Overall Width - Less Bucket 1636 mm
W  Bucket Width 1674 mm
X  Clearance Radius - Front With Bucket 2322 mm
Z  Clearance Radius - Rear with Standard Counterweight 1577 mm
Maximum Rollback at Specified Height  66.8°
Angle of Approach 90°
Grouser Height 25 mm

Capacity

Operating Capacity at 35% Tipping Load 794 kg
Operating Capacity at 50% Tipping Load 1134 kg
Tipping Load 2268 kg
Operating Weight 3903 kg

Engine

Make/Model Yanmar/4TNV98C-NMSL Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 3.3 L/4
Gross Power @ rpm 52.1 kW @ 2500
Net Power @ rpm 51 kW @ 2500
Peak Torque @ rpm 242.7 Nm @ 1600
Oil Pump Capacity 10.4 L
Alternator Voltage/Amperage 14V/95A

Track Drives

Drawbar Pull/Tractive Effort 4,498 kg
Track Type/Track Rollers/Roller Type Rubber/4/Steel
Track Width 320 mm
Ground Pressure 0.43 bar

Forces

Bucket Breakout - Tilt Cylinder 2429 kg
Bucket Breakout - Lift Cylinder 2275 kg
Ground Speed - Single Speed 8.5 km/hr
Ground Speed - Two Speed 12.4 km/hr

Volume

Fuel Tank 91 L
Hydraulic Reservior Tank 41.6 L
Coolant Capacity 13.3 L

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed 70.0 L/min
High-Flow Hydraulic Flow - Rated Speed 128.8 L/min
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear Box Reduction

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 850 CCA @ -18°C

Performance

All-Tach® Mounting System Standard
IdeaTrax™ Exclusive Standard
Straight Tracking Standard
Power-A-Tach® Mounting System Optional
Self-Leveling Hydraulic Lift Action Standard
Selectable Self-Leveling Lift Action Optional
Two-Speed Drive Standard
12-Volt Battery Standard

Engine

Engine Alert System with Error Display Standard
Engine Automatic Shutdown System Standard
Grid/Manifold Heater Starter Assist Standard
Dual-Element Air Cleaner with Indicator Standard

Hydraulic System

Auxiliary Hydraulics Standard
High-Flow Auxiliary Hydraulics Optional

Undercarriage

Elevated Planetary Final Drives Standard
Maintenance Free Rollers Each Side 3
Single Flange Front/Dual Flange Rear Idlers Standard
Rubber Track Undercarriage System Standard
Servo-Controlled Hydrostatic Drive Standard
Dedicated Undercarriage Standard

Structure

Tilt-out Foot Pod Exclusive Standard
Back-up Alarm Standard
Combination Radiator & Hydraulic Oil Cooler Standard
ROPS/FOPS Level II Overhead Guard Standard
Anti-Vandalism Lock Provisions Standard
Mechanical Lift Cylinder Lock Standard

Operator's Station

Pressurized Cab Enclosure with A/C Optional
Fold-Up Door Optional
Multi-Function Function Display Screen Standard
Drive Sensitivity Adjustment Standard
Electronic Attachment Control - 14-Pin Connector Optional
Electro-Hydraulic Joystick Controls Standard
Selectable Control Pattern Configuration Optional
Variable Speed Control, Selectable On & Off Optional
Foot Throttle Standard
Full-Suspension Seat Standard
Air Suspension Seat Optional

Construction Machinery Online

Language Options

E-Mail: webmaster@global-ce.com TEL: 0086-10-52895329 FAX:0086-10-84673349
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China