| Model | 755K Crawler Loader |
|---|---|
| Net Power | 145 kW (194 hp) @ 1,800 rpm |
| Operating Weight | 20 492 kg (45,178 lb.) |
| Heaped Capacity | 2.5 m3 (3.2 cu. yd.) |
| Breakout Force | 197 kN (44,287 lbf) |
| Dump Height | 2950 mm (116 in.) |
FT4/Stage IV-compliant 6.8-L John Deere PowerTech™ engine boasts a boost in horsepower and standard Eco mode, for maximum fuel economy without loss of performance.
Auto-idle helps save fuel by reducing engine speed when the crawler loader is not moving and no functions are being activated.
Dual-path hydrostatic (HST) transmission allows you to carry a full load through turns without losing material.
HST drivetrain and load-sensing hydraulics deliver fatigue-beating, low-effort response and control, at all times and in all conditions.
Hydraulically driven fan runs only as needed, for cooling and fuel efficiency.
Counter-rotating tracks boost maneuverability on crowded jobsites.
Infinitely variable speed range to 6.2 mph
Single-lever joystick or two or three-lever hydraulic controls - choose the layout that best fits your operator’s style.
Control the throttle using buttons on the sealed-switch module.
Heavy-duty undercarriage is sealed, lubricated, and built to last.
Swing-out side shields and tilt-out grille enable access to both sides of the coolers, for low effort debris removal.
| Engine Manufacturer | John Deere | |||
|---|---|---|---|---|
| Engine Model | PowerTech PVS 6068 | |||
| Emission Rating | Tier 4 | |||
| Displacement, ltr (Inches³) | 6.8 (415) | |||
| Rated Speed, rpm | 1800 | |||
| Engine Output - Net, kW (hp) | 145 (194) | |||
| Transmission type | Hydrostatic | |||
| Final drive type | In-line Drive Motor - Double Reduction Planetary | |||
| Track rollers per side - std | 6 | |||
| Track shoe pitch, mm (inches) | 203 (8) | |||
| Track shoe width, mm (inches) | 560 (22) | |||
| Ground Contact Area, cm² (Inches²) | 28985 (4493) | |||
| Track shoes per side - std | 38 |
| Overall length, mm (ft/in) | 6824 (22 ft 5 in) | |||
|---|---|---|---|---|
| Max. height, mm (ft/in) | 3330 (10 ft 11 in) | |||
| Track length on ground, mm (inches) | 2588 (102) | |||
| Ground clearance, mm (inches) | 432 (17) | |||
| Track gauge - standard, mm (ft/in) | 1880 (6 ft 2 in) | |||
| Shovel 1 width, mm (ft/in) | 2591 (8 ft 6 in) | |||
| Shovel 1 dump height 45° max, mm (ft/in) | 2950 (9 ft 8 in) | |||
| Bucket pin height, mm (ft/in) | 4080 (13 ft 4 in) | |||
| Bucket reach - max, mm (ft/in) | 1100 (3 ft 7 in) | |||
| Digging depth, mm (inches) | 167 (6.6) | |||
| Steering clutches and brakes | No |
| Fuel tank capacity, ltr (gallons (US)) | 326 (86) | |||
|---|---|---|---|---|
| Implement hydraulic tank, ltr (gallons (US)) | 103 (27.2) | |||
| Shovel 1 capacity, m³ (yd³) | 2.5 (3.2) |
| Ground bearing pressure - standard, kPa (PSI) | 69.6 (10.1) | |||
|---|---|---|---|---|
| Static tipping load shovel 1, kg (lbs) | 15362 (33867) | |||
| Breakout force - max, kN (lbf) | 197 (44287) | |||
| Voltage, V | 24 | |||
| Alternator output, Amp | 100 | |||
| Pump type | Piston Pump - Load Sensed | |||
| Pump flow, lt/min (gallons (US) / min) | 246 (65) | |||
| Relief pressure, kPa (PSI) | 26028 (3775) |
| Operating weight std, kg (lbs) | 20492 (45178) |
|---|
Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China
