GUOJICHANGLIN 967H Wheel Loader

1. The 967H Wheel Loader is equipped with SHANGCHAI engine.
2. Its KD switch allows better efficiency and easy operation.
3. This front end loader employs the famous original GRAZIANO wet type axle with multi-disc limited slip differentials to deliver maximum traction under changing traction conditions.
4. It is equipped with reliable ZF transmission case and torque converter.
5. The bucket of this wheel loader features automatic leveling ability and its boom comes with position limitation.
6. The combined seal cylinder adopted by this wheel loader obtains high seal performance and more reliability.

Overall Dimension
1	Length (with bucket on ground)		8280(mm)
2	Width (to the outside of wheels)		2897(mm)
3	Bucket width		3048(mm)
4	Height (to the top of the cab)		3545(mm)
5	Wheel base		3300(mm)
6	Tread		2300(mm)
7	Min. ground clearance		368(mm)
Main Technical Specification
1	Rated load		6000(Kg)
2	Operating weight		18600kg
3	Rated bucket capacity		3.5(m3)
4	Max. breakout force		190KN
5	Max. driving force		180KN
6	Max. dump clearance		3028(mm)
7	Dump reach		1228(mm)
8	Dump angle at any position		≥45°
9	Digging depth(with bucket bottom horizontal)		212(mm)
10	Min. turning radius
	(1) Outside of bucket		6870(mm)
	(2) Outside of front wheel		6258(mm)
11	Pivot angle frame		38+1°
12	Oscillating angle of rear axle		+12°
13	Lifting time of bucket		5.8(sec.)
14	Lowering time of bucket		3.2(sec.)
15	Dumping time		1.5(sec.)
16	Traveling speed (Km/h)
	(1)1st gear (forward & reverse)		6.8
	(2)2nd gear (forward & reverse)		12.2
	(3)3rd gear (forward & reverse)		24.5
	(4)4th gear (forward)		35
Diesel Engine
1	Model	Cummins 6CTAA8.3-C240	ShangChai SC11CB240.1G2B1
2	Type	Direct injection. Turbocharged Air to air cooling	Direct injection. Turbocharged Water cooling
3	Rated output	179(KW)	174.5(KW)
4	Inter-bore of cylinder/stroke	114/135(mm)	121/152(mm)
5	Total exhaust of cylinder	8.3(L)	10.5(L)
6	Model of start motor	Denso/R7.5	4N3181
7	Power of start motor	7.5(KW)	7.5(KW)
8	Voltage of starting motor	24(V)	24(V)
9	Rated speed	2200(r/min.)	2200(r/min.)
10	Max. Torque	1017(N.m)/1500RPM	912(N.m)/1400RPM
11	Starting type	Electric	Electric
12	Min. specific fuel consumption	205(g/Kw.h)	238(g/Kw.h)
13	Engine specific oil consumption	1.07(g/Kw.h)	0.95-1.77(g/Kw.h)
14	Net weight	617(Kg)	960(Kg)
Transmission System
1. Torque Converter
1	Type		3-element. Single stage
2	Torque ratio		2.55
3	Max. diameter of flow path		340(mm)
4	Cooling type		Pressure oil circulating
2. Gear Box
1	Model		ZF4WG200
2	Type		Power shift, constant-mesh spur gear
3	Gear shift position		4 forward and 3 reverse gears
3. Axle and Tire
1	Type of main reducer		Spiral bevel gear, single stage
2	Gear ratio of main reducer		5.111
3	Type of final reducer		Single stage planetary
4	Gear ratio of final reducer		5.167
5	Total ratios		26.409
6	Size of tire		23.5-25 -16PR (L-3)
Working Device Hydraulic System
1	Model of oil pump		P257-G80367ZCA6 / P124-G20NIG
2	System pressure		20(MPa)
3	Model of distribution valve		7130-B103(HUSCO)
4	Model of pilot valve		406-1400-1145 (HUSCO)
5	(D×L) Dimension of lifting cylinder		Ф160×90×801(mm)
6	(D×L) Dimension of tilt cylinder		Ф210×110×494(mm)
Steering System
1	Type		Middle articulated frame. Full-Hydraulic steering
2	Model of steering pump		P257-G80467HCX6 / G40LIG
3	System pressure		16MPa
4	Dimension of steering cylinder		Ф100×50×425(mm)
5	Model of redirector		BZZ3-100
Brake System
1	Type of traveling brake		Wet type multi-disc brake Dual chamber dual piping air over oil brake
2	Air pressure		7-8(kgf/cm2)
3	Brake pressure		80(kgf/cm2)
4	Type of emergency brake		Automatic cutting-off air brake
5	Type of parking brake		Drum brake Manual control cutting-off air brake
Oil Capacity
1	Fuel(diesel)		350(L)
2	Engine lubricating oil		28(L)
3	Brake System		2×1.5(L)
4	Oil for converter and gear box		45(L)
5	Oil for hydraulic system		250(L)
6	Oil for driving axles (F/R)		70(L)+57(L)