GUOJICHANGLIN 966 Wheel Loader

Features
1. The 966 wheel loader uses engine from Shanghai Diesel Engine Co., Ltd.
2. The KD switch brings optimal efficiency and easy operation of the wheeled loader.
3. Our front end loader is installed with dry type axle from MERITOR.
4. Reliable ZF gearbox and torque converter.
5. Bucket automatic leveling is available.
6. The boom comes with position limitation function.
7. For high seal performance and optimal reliability, this wheel loader is engineered with combined seal cylinder.

Overall Dimension
1	Length (with bucket on ground)	8580(mm)
2	Width (to the outside of wheels)	2897(mm)
3	Bucket width	3048(mm)
4	Height (to the top of the cab)	3532(mm)
5	Wheel base	3300(mm)
6	Tread	2300(mm)
7	Min. ground clearance	403(mm)
Main Technical Specifications
1	Rated loading capacity	6000(kg)
2	Operating weight	19100(kg)
3	Rated bucket capacity	3.5(m3)
4	Max. breakout force	190KN
5	Max. driving force	180KN
6	Max. dumping clearance	3393(mm)
7	Dumping reach	1365(mm)
8	Dumping angle at any position	≥45°
9	Digging depth (with bucket bottom horizontal)	212(mm)
10	Min. turning radius
	(1) Outside of bucket	6970(mm)
	(2) Outside of front wheel	6258(mm)
11	Articulation angle	38±1°
12	Oscillating angle of rear axle	±12°
13	Lifting time of bucket	5.8(sec.)
14	Lowering time of bucket	3.2(sec.)
15	Dumping time	1.5(sec.)
16	Traveling speed (4 forward and 3 reverse gear)
	(1)1st gear (forward & reverse)	6.5(km/h)
	(2)2nd gear (forward & reverse)	11.8(km/h)
	(3)3rd gear (forward & reverse)	23.5(km/h)
	(4)4th gear (forward)	37.2(km/h)
Diesel Engine for Wheel Loader
1	Model	Shanghai Diesel Engine SC11CB240.1G2B1
2	Type	Direct injection, turbocharged, water cooled
3	Rated output	174.5(kW)
4	Piston diameter/stroke	121/152(mm)
5	Total engine displacement	10.5(L)
6	Model of starting motor	4N3181
7	Power of starting motor	7.5(kW)
8	Voltage of starting motor	24(V)
9	Rated speed	2200(r/min)
10	Max. torque	912(N.m)/1400rpm
11	Starting type	Electrical starting
12	Min. specific fuel consumption	238(g/kW.h)
13	Engine specific oil consumption	0.95-1.77(g/kW.h)
14	Net weight	960(kg)
Transmission System for Wheel Loader
I. Torque Converter
1	Type	3-element, single stage
2	Torque ratio	2.55
3	Max. dia. of flow path	340(mm)
4	Cooling type	Pressure oil circulating
II. Gear Box
1	Model	ZF4WG200
2	Type	Power shift, constant-mesh spur gear
3	Gear shift position	4 forward and 3 reverse gears
III. Axle and Tire
1	Type of main reducer	Spiral bevel gear, single stage
2	Gear ratio of main reducer	4.875
3	Type of final reducer	Single stage planetary
4	Gear ratio of final reducer	4.94
5	Total gear ratio	24.0825
6	Size of tire	23.5-25-20PR L-3
Working Device Hydraulic System
1	Model of oil pump	JHP2080-Gj0020-XF (From Jinan Hydraulic Pump Co., Ltd.)
2	System pressure	20(MPa)
3	Model of distribution valve	DXS-00(from Zhejiang Linhai)
4	Model of pilot valve	D32II
5	Dimension of lifting cylinder (D×L)	Ф160×90×874(mm)
6	Dimension of tilting cylinder (D×L)	Ф210×110×575(mm)
Steering System for Wheel Loader
1	Type	Articulated frame, full-hydraulic steering
2	Model of steering pump	JHP2080S (from Jinan Hydraulic Pump Co., Ltd.)
3	Steering system pressure	16MPa
4	Dimension of steering cylinder	Ф100×50×425(mm)
5	Model of redirector	BZZ3-100
Braking System
1	Type of service brake	Caplier disc brake, dual pipelines, air-over-oil activated 4 wheel brake
2	Air pressure	7-8(kgf/cm2)
3	Type of emergency brake	Automatic cutting-off air brake
4	Type of parking brake	Drum brake, manual control cutting-off air brake
Oil Capacity for Wheel Loader
1	Fuel(diesel)	350(L)
2	Engine lubricating oil	28(L)
3	Braking system	2×2(L)
4	Oil for converter and gear box	45(L)
5	Oil for hydraulic system	250(L)
6	Oil for driving axles (F/R)	30(L)+24(L)