| Rated rpm | |
|---|---|
| Operating Weight | 47138.0 lb 21382.0 kg |
New, fully automatic four-speed lock-up clutch transmission continuously optimizes gear and engine speed for the application without added operator input.
Added gear between first and second, and seamless lock-up clutch engagement, for exceptionally smooth shifting.
Maintains power to the ground through load changes for an aggressive feel in the dirt.
Up to 2.5 percent more productive – move more material per hour.*
Faster implement response*, especially with GRADE technologies.
Versatility – pushing power you want for heavy dozing and the fine control you need for finish grading – all in one easy-to-transport machine.
*Compared to previous model.
Full-time Auto Shift for significantly better fuel efficiency with less operator effort – without sacrificing performance.
Up to 20 percent more fuel efficient* – as much as 30 percent better in lighter load finish grading applications.
Sustainable: fuel savings reduces CO2 production by an average of approximately 16.6 metric tons (17.7 tons) per year.
*Compared to previous model.
Automatically maintain established blade mainfall/cross slope with Cat GRADE with Slope Assist (Standard). Finish jobs faster, with better surface quality and significantly less operator effort. No additional hardware required.
Whether production dozing or finish grading, take on 3D design plans more efficiently with Cat GRADE with 3D (Optional). Factory integrated grade control system features cab roof-mounted GNSS antennas to eliminate blade masts and cables. Includes AutoCarry™ to further boost productivity.
Versatile, scalable Cat AccuGrade™ (Optional) is a dealer-installed grade control system. Choice of Laser, Global Navigation Satellite System (GNSS) or Universal Total Station (UTS) so you get the right level of accuracy to match your job requirements.
Factory equip your dozer for easy installation of an AccuGrade system with the AccuGrade Ready Option (ARO) (Optional).
Manage your fleet more effectively and profitably with Product Link™/VisionLink® remote monitoring.
Change ground speeds easily – in large (half gear) or small (one-tenth gear) increments – with detented thumb roller.
New Liquid Crystal Display (LCD) places machine data, settings menus, grade control data and more conveniently in front of the operator.
Display enables coded start and operator profiles.
Improved blade feedback with updated implement joystick.
More ground clearance and better penetration with new high-lift, multi-shank ripper.
The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.
Units:
| Engine Model | Cat C9.3 ACERT™ Cat C9.3 ACERT™ | More |
| Flywheel Power | 215.0 HP 161.0 kW | More |
| Displacement | 567.0 in³ 9.3 l | More |
| Emissions | U.S. EPA Tier 4 Final U.S. EPA Tier 4 Final | More |
| Net Power - 2,200 rpm - ISO 9249/SAE J1349 | 215.0 HP 161.0 kW | More |
| Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm | 245.0 HP 183.0 kW | More |
| Note (1) | All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. | More |
| Note (2) | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. | More |
| Build Number | 19 19 | More |
| Fuel Tank | 97.2 gal (US) 368.0 l | More |
| Cooling System | 12.2 gal (US) 46.0 l | More |
| Engine Crankcase | 6.5 gal (US) 24.6 l | More |
| Power Train | 39.1 gal (US) 148.0 l | More |
| Final Drive - Each | 3.6 gal (US) 13.5 l | More |
| Roller Frames - Each | 6.6 gal (US) 25.0 l | More |
| Pivot Shaft Compartment | 1.3 gal (US) 5.0 l | More |
| Hydraulic Tank | 16.5 gal (US) 62.5 l | More |
| DEF Tank | 4.5 gal (US) 17.1 l | More |
| Operating Weight | 47138.0 lb 21382.0 kg | More |
| LGP A | 53829.0 lb 24417.0 kg | More |
| LGP S | 51385.0 lb 23299.0 kg | More |
| XL A | 47846.0 lb 21703.0 kg | More |
| XL SU | 47138.0 lb 21382.0 kg | More |
| XL VPAT | 53042.0 lb 24060.0 kg | More |
| XW A | 49797.0 lb 22588.0 kg | More |
| XW SU | 48909.0 lb 22185.0 kg | More |
| XW VPAT | 54045.0 lb 24515.0 kg | More |
| LGP VPAT | 54526.0 lb 24733.0 kg | More |
| Note | Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator. Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator. | More |
| LGP A-Blade | 6.46 yd³ 4.94 m³ | More |
| LGP S-Blade | 4.96 yd³ 3.79 m³ | More |
| XL A - Blade | 5.17 yd³ 3.95 m³ | More |
| XL SU - Blade | 7.26 yd³ 5.55 m³ | More |
| XL VPAT - Blade | 6.07 yd³ 4.64 m³ | More |
| XW A - Blade | 5.69 yd³ 4.35 m³ | More |
| XW SU - Blade | 7.38 yd³ 5.64 m³ | More |
| XW VPAT - Blade | 6.57 yd³ 5.02 m³ | More |
| LGP VPAT - Blade | 6.57 yd³ 5.02 m³ | More |
| LGP A-Blade | 16.6 ft 5072.0 mm | More |
| LGP S-Blade | 13.3 ft 4063.0 mm | More |
| LGP VPAT - Blade | 13.7 ft 4160.0 mm | More |
| XL A - Blade | 13.7 ft 4160.0 mm | More |
| XL SU - Blade | 10.7 ft 3261.0 mm | More |
| XL VPAT - Blade | 12.7 ft 3880.0 mm | More |
| XW A - Blade | 14.8 ft 4520.0 mm | More |
| XW SU - Blade | 11.7 ft 3562.0 mm | More |
| XW VPAT - Blade | 13.7 ft 4160.0 mm | More |
| Ground Clearance | 16.0 in 406.0 mm | More |
| Ground Pressure (ISO 16754)(3) | 5.11 psi 35.2 kPa | More |
| Length - Basic Tractor(2) | 14.5 ft 4415.0 mm | More |
| Length - Track on Ground | 10.67 ft 3245.0 mm | More |
| Machine Height - To Product Link Antenna(1) | 10.83 ft 3303.0 mm | More |
| Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. | More |
| Width - Tractor - Without Trunnions - Standard Track | 10.5 ft 3201.0 mm | More |
| Ground Clearance | 16.0 in 406.0 mm | More |
| Ground Pressure (ISO 16754)(3) | 6.28 psi 43.3 kPa | More |
| Length - Basic Tractor(2) | 16.42 ft 5002.0 mm | More |
| Length - Track on Ground | 10.67 ft 3245.0 mm | More |
| Machine Height - To Product Link Antenna(1) | 10.83 ft 3303.0 mm | More |
| Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). | More |
| Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. | More |
| Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. | More |
| Width - Tractor - Without Trunnions - Standard Track | 10.33 ft 3143.0 mm | More |
| Ground Clearance | 15.0 in 375.0 mm | More |
| Ground Pressure (ISO 16754)(3) | 8.66 psi 59.7 kPa | More |
| Length - Basic Tractor(2) | 13.83 ft 4210.0 mm | More |
| Length - Track on Ground | 9.25 ft 2814.0 mm | More |
| Machine Height - To Product Link Antenna(1) | 10.67 ft 3253.0 mm | More |
| Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). | More |
| Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. | More |
| Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. | More |
| Width - Tractor - Without Trunnions - Standard Track | 8.0 ft 2440.0 mm | More |
| Ground Clearance | 15.0 in 375.0 mm | More |
| Ground Pressure (ISO 16754)(3) | 9.78 psi 67.4 kPa | More |
| Length - Basic Tractor(2) | 16.08 ft 4894.0 mm | More |
| Length - Track on Ground | 9.25 ft 2814.0 mm | More |
| Machine Height - To Product Link Antenna(1) | 10.67 ft 3253.0 mm | More |
| Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). | More |
| Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. | More |
| Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. | More |
| Width - Tractor - Without Trunnions - Standard Track | 8.92 ft 2717.0 mm | More |
| Ground Clearance | 15.0 in 375.0 mm | More |
| Ground Pressure (ISO 16754)(3) | 6.64 psi 45.8 kPa | More |
| Length - Basic Tractor(2) | 13.83 ft 4210.0 mm | More |
| Length - Track on Ground | 9.25 ft 2814.0 mm | More |
| Machine Height - To Product Link Antenna(1) | 10.67 ft 3253.0 mm | More |
| Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). | More |
| Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. | More |
| Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. | More |
| Width - Tractor - Without Trunnions - Standard Track | 9.17 ft 2792.0 mm | More |
| Ground Clearance | 16.0 in 406.0 mm | More |
| Ground Pressure (ISO 16754)(3) | 6.92 psi 47.7 kPa | More |
| Length - Basic Tractor(2) | 16.42 ft 5002.0 mm | More |
| Length - Track on Ground | 10.67 ft 3245.0 mm | More |
| Machine Height - To Product Link Antenna(1) | 10.83 ft 3303.0 mm | More |
| Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). | More |
| Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. | More |
| Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. | More |
| Width - Tractor - Without Trunnions - Standard Track | 9.83 ft 2996.0 mm | More |
| Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). | More |
| Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. |
CATERPILLAR
Name : Cat
Service Tel : （309）578-6298
E-mail :
Web Site : https://www.caterpillar.com/en.html
Address :
Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China
