Global-CE > Compactor > CatCompactor > Cat Vibratory Soil Compactors CP44B
Cat Vibratory Soil Compactors CP44B

Cat Vibratory Soil Compactors CP44B

Net Power
Bore
Width - Over Drums
Operating Weight 16471.0 lb

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

VIBRATORY SYSTEM

SEE MORE

POD-STYLE WEIGHT HOUSING

The pod-style weight housing is assembled and sealed at the factory to ensure cleanliness, longer bearing life and easier field exchange or service.

DUAL AMPLITUDE

The dual amplitude works efficiently in a wider range of applications. Selection is controlled from the operator's station.

VIBRATORY FREQUENCY

The CP44B has a vibratory frequency of 31.9 Hz (1914 vpm) for maximum compaction results. An optional variable frequency control allows frequency to be better matched to varying job conditions.

LARGE HEAVY-DUTY BEARINGS

Large heavy-duty bearings for the eccentric weight shaft allow higher frequency for greater force.

3 YEAR/3000 HOUR

The 3 year/3000 hour vibratory bearing lube service interval reduces maintenance.

ISOLATION MOUNTS

The heavy-duty isolation mounts on the CP44B allow more force to be transmitted to the ground and less vibration to the drum yoke.



PROPRIETARY ECCENTRIC WEIGHTS

SEE MORE

POSITIVE AMPLITUDE SELECTION

Positive amplitude selection is accomplished when the spherical steel shot is repositioned inside the hollow eccentric weight. Direction of weight shaft rotation determines amplitude level.

SIMPLIFIED CONTROL

Control is simplified from the operator's station with a selection switch on the operator's console.

RELIABILITY

The proprietary eccentric weights offer high reliability since there is no chance of the high-strength spherical steel shot welding together. System reliability is superior to swinging mechanical weights and is also quieter during starts and stops.

SERVICE LIFE

The proprietary eccentric weights offer long service life. There are no heavy weights to slam together and no metal fragments to contaminate the bearing lubrication system.



CAT® C3.4B ENGINE

SEE MORE

ENGINE CERTIFIED TO MEET EMISSION STANDARDS

The C3.4B engine is certified to meet U.S. EPA Tier 4 Final and European EU Stage IV emission standards.

ECO-MODE

When engaged, Eco-mode reduces the operating speed of the engine to a lower rate, which reduces fuel consumption. Eco-mode is suitable for most normal applications. When more engine power is required, Eco-mode can be disabled.



DUAL PUMP PROPEL SYSTEM

SEE MORE

DUAL PROPEL PUMPS

The dual propel pumps provide separate, balanced flow to the rear wheel axle and the drum drive motors. Provides high gradeability and increases tractive effort in loose or poor underfoot conditions.

LIMITED SLIP DIFFERENTIAL

The limited slip differential provides balanced tractive effort and smooth torque transfer to both rear wheels.

TWO SPEED RANGES

The dual pump propel system offers two speed ranges for versatile operation. Low speed range for vibratory operation and maximum torque when climbing grades. High speed range moves the machine quickly over longer distances.

FLUSHING VALVES

Flushing valves in each propel circuit help keep hydraulic oil cool and clean for maximum system efficiency.



GRADEABILITY AND MACHINE CONTROL

SEE MORE

TWO PROPEL PUMP SYSTEM

The two propel pump system has dedicated pumps to drive the heavy-duty, high-torque rear wheel and drum motors independently. Should the drum or wheels begin to spin, there is always hydraulic flow to the non-spinning motor, allowing continuous tractive effort. This is especially useful in loose underfoot conditions.

CONTROLLABILITY

Controllability is another feature of dual propel pumps. The operator is able to stop, maintain machine position and change directions while on a grade.

PRODUCTIVITY

The CP44B provides high productivity when working on more demanding grades. These machines are very effective in trench applications.



OPEN PLATFORM WITH ROPS/FOPS CANOPY

SEE MORE

WORKING ENVIRONMENT

The open platform of the CP44B offers a spacious and comfortable working environment with all controls, levers, switches and gauges positioned to maximize productivity.

VISIBILITY

The open platform offers unrestricted visibility to the drum and tire edge and to the side and rear of the machine.

HANDRAILS AND FOOT RESTS

The platform is enclosed by handrails and features foot rests for sure footing and support when working on a grade.

STANDARD EQUIPMENT

Standard equipment includes a rotating, adjustable seat with integrated operators console and LCD display, two front-facing and two rear-facing working lights, handrails with footrests, a lockable vandalism guard and a rear view mirror.



OPERATOR'S STATION

SEE MORE

STEERING CONSOLE

The steering console is adjustable within the tilt range to the desired position of the operator or for simple entrance and exit. Integrated cupholders provide a convenient and secure place to put beverage containers.

OPERATOR'C CONSOLE WITH INTEGRATED LCD DISPLAY

The operator's console is integrated with the operator's seat. The console includes a control keypad that is backlit to enable low light operation. The console also houses the propel lever and an integrated LCD display that functions as a gauge cluster as well as a diagnostics center.

SINGLE LEVER CONTROL

Single lever control for propel and vibratory On/Off provides simple and low effort operation.

SEAT

The comfortable and durable seat has adjustable fore/aft position, bottom cushion height, suspension stiffness. The seat rotates to the right 20 degrees from center to provide greater comfort during operation. The seat is equipped with a seat belt.

ISOLATED OPERATOR'S STATION

The operator's station is isolated with heavy-duty rubber mounts reducing machine vibration transmitted to the operator.

FLOOR MAT

A floor mat helps further isolate the operator from machine vibration and noise.



ROPS/FOPS CAB

SEE MORE

CAB ENVIRONMENT

The cab is a spacious and comfortable work environment that includes large windows, more interior room with storage areas, a cup holder, enhanced ergonomics and low noise levels.

FULL-LENGTH GLASS WINDSHIELD

The full-length glass windshield provides exceptional visibility to the drum and optional leveling blade.

MIRRORS AND LIGHTS

Included with the cab are two exterior rear view mirrors, and front and rear working lights.

WINDSHIELD WIPERS

Windshield wipers on the front and rear windows allow good vision in adverse conditions.

SIDE WINDOWS

Side windows open for cross ventilation.

CLIMATE CONTROL

The cab is climate controlled with standard heater/defroster and available air conditioning to keep the working environment comfortable.



LEVELING BLADE (OPTIONAL)

SEE MORE

EXPANDS VERSATILITY AND UTILIZATION

The leveling blade expands the machines versatility and utilization for use in material knockdown, site leveling, trench backfilling and light dozing.

BLADE CONTROL

Leveling blade control is controlled by the operator's right foot to provide simple, one-handed operation of machine propel, steering and blade functions simultaneously.

POWER AND TRACTIVE EFFORCT

The dual propel pumps provide plenty of power and tractive effort for effective blade use without drum spin.

TRANSPORTING

No special permits are required for transporting with a blade width of 2.12 m (6' 11").

CUTTING EDGES

Two-piece reversible and replaceable cutting edges increase edge service life and reduce replacement costs.

HIGH MOUNTING POINT

The high mounting point provides superior curb and obstruction clearance.



SERVICEABILITY

SEE MORE

VISUAL INDICATOR

A visual indicators allows easy check of the hydraulic oil tank level.

AIR RESTRICTION SENSOR

Sensors detect when air restriction occurs and alerts the operator via the LCD display on the operator's console.

REAR MOUNTED COOLING SYSTEM

The rear mounted cooling system provides easy access for cleaning. The hydraulic oil cooler tilts rearward for additional access to the radiator.

SEALED-FOR-LIFE BEARINGS

Sealed-for-life bearings in the articulation hitch never need to be greased.

500 HOUR ENGINE OIL CHANGE INTERVAL.

500 hour engine oil change interval.

VIBRATORY SYSTEM LUBRICATION SERVICE

A 3 year/3000 hour vibratory bearing lube service interval reduces maintenance.

HYDRAULIC SYSTEM OIL SERVICE

A 3 year/3000 hour Hydraulic System oil service interval reduces maintenance.

QUICK CONNECT HYDRAULIC TEST PORTS

Quick connect hydraulic test ports simplify system diagnostics.

ECOLOGY DRAINS

Provide a method to drain fluids that is more environmentally safe. They are included on the radiator, engine oil pan, hydraulic tank and fuel tank.

S•O•S (SCHEDULED OIL SAMPLING) PORTS

S•O•S ports allow for simple fluid collection of engine oil, engine coolant and hydraulic oil.

SECURE HOSE ROUTING

Hose routing is secured with polyethylene routing blocks to reduce rubbing and increase service life.

ELECTRICAL SYSTEM INTEGRITY

Nylon braided wrap and all-weather connectors ensure electrical system integrity. Electrical wiring is color-coded, numbered and labeled with component identifiers to simplify troubleshooting.

MAINTENANCE-FREE CAT BATTERIES

Maintenance-free Cat batteries are mounted in the rear of the machine and are protected by the engine hood. Cat batteries are specifically designed for maximum cranking power and protection against vibration.

PRODUCT LINK WIRE-READY

The CP44B is Product Link wire-ready. Product Link System ensures maximum uptime and minimum repair costs by simplifying tracking of equipment fleets. The system provides automatic machine location and hour updates. The system can be obtained through your local Cat dealer.


OVERVIEW

The CP44B vibratory soil compactor has a durable Cat® power train, field-proven hydraulic and vibratory systems and the world's largest and most dedicated dealer support system.

WEIGHTS

UNITS:

Operating Weight - With Cab16471.0 lb
Operating Weight - With ROPS/FOPS15935.0 lb
Weight - Drum with Cab8181.0 lb
Weight - Drum with ROPS/FOPS7939.0 lb

OPERATING SPECIFICATIONS

Compaction Width66.0 in
Ground Clearance16.1 in
Travel Speed - Maximum7.0 mile/h
Turning Radius - Inside Drum Edge10.0 ft

ENGINE

Gross Power100.6 HP
Engine ModelCat C3.4B

DIMENSIONS

Drum Diameter - Over Pads48.2 in
Drum Width66.0 in
Height - With ROPS/FOPS or Cab9.35 ft
Optional Blade Height22.6 in
Overall Length16.7 ft
Overall Length - With Blade Option18.41 ft
Overall Width5.91 ft
Overall Width - With Blade Option6.95 ft
Wheel Base8.5 ft

VIBRATORY SYSTEM

Centrifugal Force - Maximum29900.0 lb
Centrifugal Force - Minimum15000.0 lb
Nominal Amplitude - High0.063 in
Nominal Amplitude - Low0.031 in
Variable Frequency Option Range23.3-31.9 Hz (1400-1914 vpm)
Vibratory Frequency - Standard1914.0 V/m

TIRES

Tires14.9 × 24 8-ply traction

SERVICE REFILL CAPACITIES

Fuel Tank Capacity40.0 gal (US)


Construction Machinery Online

Language Options

E-Mail: webmaster@global-ce.com TEL: 0086-10-52895329 FAX:0086-10-84673349
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China