Global-CE > Grader > CatGrader > Cat M Series Motor Graders 140M3/140M3 AWD
Cat M Series Motor Graders 140M3/140M3 AWD

Cat M Series Motor Graders 140M3/140M3 AWD

Rated power 200.0 HP 149.0 kW
Max.torque 920.0 lb/ft 1247.0 N·m

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

Operator Station

See more

Visibility

Good visibility is key to your safety and efficiency. Angled cab doors, tapered engine enclosure and a sloped rear window make it easy to see the moldboard and tires, as well as behind the machine. An optional rear vision camera further enhances lines of sight all around the machine.

In-Dash Instrument Cluster

A redesigned message display shows machine performance and diagnostic information, including DEF tank levels. Now located in the center console, it also displays Cat Grade Control Cross Slope readings conveniently in front of the operator.

Comfort and Control

Experience the most comfortable cab in the industry. Joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue for better productivity. Rocker and control switches are in easy reach. An updated seat with softer cushions and three-position cushion tilt adds to your overall comfort. You can even upgrade to a heated or heated/ventilated seat. An optional seat belt indicator feature is also available. Control pods can be adjusted electronically, making it easy to set your ideal operating position. Multiple isolation mounts significantly reduce sound and vibration for a more relaxed work environment. The high capacity Heating, Ventilation and Air Conditioning (HVAC) system dehumidifies and pressurizes the cab, seals out dust and helps keep windows clear. Pop-out louvers circulate fresh air. An optional deluxe radio with CD features MP3 and Bluetooth technology.

Machine and Implement Controls

See more

Two electro-hydraulic joysticks with electronically adjustable control pods help position operators for optimal comfort, visibility and productive operation.

Joystick Functions

The left joystick controls machine direction, steering, articulation, return-to-center, wheel lean, gear selection, left moldboard lift cylinder and float. The right joystick controls drawbar, circle and moldboard functions as well as electronic throttle control and manual differential lock/unlock. The steer tire angle matches the joystick position. A brake tensioning system holds the joystick in position until the operator moves it. The steering control automatically reduces steering sensitivity at higher ground speeds for predictable control. Infinitely variable roller switches control the rear ripper and/or front lift group (when equipped). Optional Programmable Auxiliary Hydraulic Pod controls up to six additional hydraulic circuits.

Electronic Throttle Control

Electronic Throttle Control helps improve productivity by providing the best match of horsepower and torque for the demands of the application.

Articulation Return-to-Center

Automatically returns the machine to a straight frame position from any angle with the touch of a button.

Selectable Blade Lift Modes

Choose the blade lift modulation mode that best fits your application or operating style: Fine, Normal, or Coarse.

Engine

See more

A Cat C9.3 ACERT engine gives you the performance you need to maintain consistent grading speeds for maximum productivity. Every U.S. EPA Tier 4 Final/EU Stage IV ACERT engine is equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically and strategically helps meet your high expectations for productivity, fuel efficiency, reliability and service life.

Hydraulic Demand Fan

The hydraulic demand fan automatically adjusts speed according to cooling requirements. When cooling demand is reduced, you benefit from more power to the ground and improved fuel efficiency.

Engine Idle Shutdown Timer

This standard feature can be software-enabled by your Cat dealer to shut down the engine after a set period of time to save you fuel and help reduce emissions.

Reversing Fan

When working in a high debris environment, adding the reversing fan option improves airflow to cut down the need for constant cleaning.

Emissions Technology

See more

Aftertreatment Technologies

Emissions reduction technology on the M Series 3 Motor Grader is designed to be transparent, with no action required from the operator. There is no need to stop. Regeneration runs automatically at cold start-up and, if needed, in the background while you work.

Aftertreatment Technologies

Caterpillar designed Tier 4 Interim products with Tier 4 Final standards in mind. To meet the additional 80 percent reduction in NOx emissions required by EPA Tier 4 Final/EU Stage IV emission standards, Caterpillar engineers only needed to add one new system to the already proven aftertreatment solution in use, Selective Catalytic Reduction (SCR).

Diesel Exhaust Fluid

Selective Catalytic Reduction utilizes Diesel Exhaust Fluid (DEF), which can be conveniently filled from ground level. Simply refill the DEF tank when you refuel. A gauge on the dash shows your fluid level. When you turn the machine off, a pump will automatically purge the DEF lines. A light located inside the rear engine compartment will turn off, telling you the purge is complete and that it is safe to turn off the electrical disconnect. If the engine/aftertreatment temperatures are high, a Delayed Engine Shutdown will activate automatically to cool the machine and then purge the lines. For complete aftertreatment information, please refer to your machine's Operation and Maintenance Manual.

Power Train

See more

Front and Rear Axles


  • Standard Automatic Differential Lock/Unlock monitors machine and application parameters to unlock/re-lock the differential during operation, improving production and enhancing comfort while protecting the power train.

  • Full Electronic Clutch Pressure Control optimizes inching modulation for smooth shifts and directional changes.

  • Programmable Autoshift option simplifies operation by allowing you to program the transmission to shift at optimal points to match your application.

  • New standard Economy Mode can be turned on to help save fuel by reducing engine speed so the machine works in a more efficient range. The average fuel savings is up to 10 percent, depending on the application.

  • Power Shift Countershaft Transmission maximizes power to the ground.

  • Engine Over-Speed Protection prevents downshifting until an acceptable safe travel speed has been established.


Front and Rear Axles

The sealed spindle keeps front axle bearings lubricated and protected from contaminants. The Cat “Live Spindle” design places the larger tapered roller bearing on the outside, where the load is greater, extending bearing life. A bolt-on modular rear axle improves serviceability and contamination control with easy access to differential components.

Hydraulic Brakes

Oil-bathed multi-disc service brakes are hydraulically actuated for smooth, predictable braking and lower operating costs. Brakes are located at each tandem wheel and have a large total brake surface area to give you dependable stopping power and longer life.

Structures and Drawbar-Circle-Moldboard

See more

Easy Maintenance for More Uptime

Caterpillar designs motor grader frame and drawbar components to give you performance and durability. The one-piece forged steel circle stands up to high stress loads, and a sacrificial wear system helps keep your service time and costs down. The articulation hitch features a large tapered roller bearing to carry loads evenly and smoothly. It is sealed to prevent contamination and a locking pin prevents articulation for safety during service or transport.

Easy Maintenance for More Uptime

The drawbar, circle and moldboard are designed to make it easy to keep the components tight. One person can easily adjust or replace the patented top-adjust drawbar wear inserts from the top of the drawbar plate, reducing downtime to save you money. Durable nylon composite wear inserts maximize circle torque and component life. Sacrificial brass wears strips between the blade mounting group and moldboard can be easily adjusted and replaced. The Shimless Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.

Blade Angle and Moldboard

An aggressive blade angle, optimized moldboard curvature and large throat clearance help you work more efficiently by allowing material to roll more freely along the blade. Heat-treated rails, hardened cutting edges and end bits, and heavy duty bolts to give you greater moldboard reliability and long service life. The link bar allows extreme moldboard positioning for easier bank sloping and ditch cutting/cleaning.

Hydraulics

See more

Responsive Hydraulics

A proven load-sensing system and advanced electro-hydraulics give you superior implement control and responsive hydraulic performance that helps make your operator's job easier. Continuously matching hydraulic flow/pressure to power demands creates less heat and reduces power consumption.

  • Consistent, Predictable Movement - Proportional Priority Pressure-Compensating (PPP-C) valves have different flow rates for the head and rod ends of the cylinder, so you can count on consistent, predictable implement response.

  • Balanced Flow - Hydraulic flow is proportioned to give you confidence that all implements will operate simultaneously without slowing the engine or speed of some implements.


Blade Float

Allows the blade to move freely under its own weight. By floating both cylinders, the blade can follow the contours of the ground. Floating only one cylinder permits the toe of the blade to follow a hard surface while the operator controls the slope with the other lift cylinder.

Independent Oil Supply

Large, separate hydraulic oil supplies prevent cross-contamination and provide proper oil cooling, which reduces heat build-up and extends component life. Cat XT™ hose allows high pressures for maximum power and reduced downtime.

Integrated Technologies

See more

Link

Cat Connect makes smart use of technology and services to improve your job site efficiency. Using the data from technology-equipped machines, you'll get more information and insight into your equipment and operations than ever before. Cat Connect technologies offer improvements in these key areas: Equipment Management - increase uptime and reduce operating costs. Productivity - monitor production and manage job site efficiency. Safety - enhance job site awareness to keep your people and equipment safe. Featured Cat Connect technologies include:

Link

Link technologies provide wireless capability to machines enabling two-way transfer of information collected by on-board sensors, control modules, and other Cat Connect technologies using off-board apps, such as our VisionLink software.

Product Link™/VisionLink®

Product Link takes the guesswork out of equipment management. Track location, hours, fuel usage, productivity, idle time, diagnostic codes and more through the online VisionLink interface. Manage your fleet in real time so you can maximize efficiency, improve productivity, and lower operating costs.

Grade

Grade technologies combine digital design data, in-cab guidance, and automatic blade controls to enhance grading accuracy, reduce rework, and lower costs related to production earthmoving and rough, fine and finish grade applications.

Cat Grade Control Cross Slope

Cat Grade Control Cross Slope is an optional fully integrated, factory installed system that helps your operator improve grading efficiency and more easily maintain accurate cross slopes. The system automatically controls one side of the blade, reducing manual operator inputs by as much as 50 percent. Experienced operators can maintain peak efficiency levels throughout more of the work day, while less experienced operators can be more productive faster. The system is job-ready from day one, and scalable for the future with AccuGrade™ upgrade kits that provide additional 2D and/or 3D control.

Cat AccuGrade

AccuGrade is an optional dealer-installed grade control system that provides higher accuracy capabilities to the Cat Cross Slope system by adding Sonic, Laser, GPS, and/or Universal Total Station (UTS) technology when the job requires. In-cab guidance helps operators work more confidently and get to grade faster, in fewer passes, using less material, improving productivity and accuracy by nearly 50 percent over conventional methods. Grade stakes and checkers are minimized, making the job site safer and more cost effective. An AccuGrade Attachment Ready Option can be ordered as a factory or dealer-installed option. It includes built-in mounting points and internal wiring for easy installation of the AccuGrade system.

Safety

See more

Operator Presence Monitoring System

Standard system keeps the parking brake engaged and hydraulic implements disabled until the operator is seated and the machine is ready for operation.

Speed Sensitive Steering

Standard function makes steering less sensitive as ground speed increases for greater operator confidence and control.

Secondary Steering System

Standard feature automatically engages an electric hydraulic pump in case of a drop in steering pressure so the operator can steer the machine to a stop.

Hydraulic Lockout

Disables all implement functions while still providing machine steering control. This standard safety feature is especially useful while roading.

Brake Systems

Brakes are located at each tandem wheel to eliminate braking loads on the power train. Redundant brake systems utilize accumulators to enable stopping in case of machine failure.

Walkways and Grab Rails

Perforated steel tandem walkways and convenient grab rails give you a sturdy platform when moving on, off and around the machine.

Circle Drive Slip Clutch

Protects the drawbar, circle and moldboard from shock loads when the blade encounters an immovable object. This standard feature also reduces the possibility of abrupt directional changes in poor traction conditions.

Blade Lift Accumulators

Help absorb impact loads to the moldboard by allowing vertical blade travel. This optional feature helps reduce wear and aids operator safety.

M Series 3 Safety Features


  • Optional rearview camera with in-cab monitor

  • New optional seat belt indicator light reminds operator to fasten safety belt

  • Grouped, ground level service points

  • Laminated front window glass

  • Optional LED Lighting

  • Ground-level electrical disconnect switch

  • Ground-level engine shutoff switch

  • Anti-glare paint eases night operation

  • Optional front and rear fenders


Work Tools and Attachments

See more

Moldboard Options

The 140M3 motor grader comes equipped with a 3.7 m (12 ft) moldboard. An optional 4.3 m (14 ft) blade is also available.

Ground Engaging Tools (GET)

A variety of tools are available from Cat Work Tools, including cutting edges, graderbits and end bits, all designed for maximum service life and productivity.

Front Mounted Groups

A front mounted push plate or front lift group are available. The front lift group can be combined with a front dozer blade or front scarifier for added versatility.

Rear Ripper/Scarifier

Made to penetrate tough material fast and rip thoroughly for easier movement with the moldboard. The ripper includes three shanks (with holders for five). Nine scarifier shanks can also be added for additional versatility.

Snow Removal Work Tools

Snow plow, snow wing and mounting options increase machine versatility and utilization throughout the year.

Smart Machine Systems

See more


  • Cat Messenger, combined with full systems integration, enhances diagnostic capability for quick analysis of critical data.

  • Electronic Technician (Cat ET) lets service technicians access stored diagnostic data and configure machine parameters through the Cat Data Link.

  • Low Battery Elevated Idle raises idle speed when low system voltage is detected, ensuring adequate system voltage and improving battery reliability.

  • Automatic Engine Deration protects the engine by automatically lowering engine torque output and alerting the operator if critical conditions are detected.


Serviceability and Customer Support

See more

Unparalleled Dealer Support

Cat motor graders are designed to help you increase uptime and reduce costs. Grouped service points and extended service intervals save maintenance time. New optional LED lights in the left hand compartment makes it more convenient to service the machine in low light.

Unparalleled Dealer Support

When it comes to supporting you, Cat dealers are second to none. From machine selection and purchase to maintenance support and rebuilds, Cat dealers have the experience and capabilities to help keep you up and running.

Sustainability

See more

Fuel Efficiency


  • Integrated machine systems and technologies improve productivity for greater accuracy, allowing the machine to do more work per gallon of fuel.

  • New Economy Mode feature allows the machine to work in the most efficient engine speed range to help reduce fuel use.


Green House Gas Emissions


  • Reduced fuel consumption means reduced CO2 emissions.

  • M Series 3 Motor Graders meet U.S. EPA Tier 4 Final/EU Stage IV emission standards.


Material Efficiency and Lifecycle Costs


  • Replaceable wear parts save maintenance time and cost, and extend major component life.

  • Major components are built to be rebuilt, eliminating waste and saving customers money by giving the machine and/or major components a second - and even third - life.

  • Approximately 95% of machine materials can be recycled (ISO 16714) to conserve valuable natural resources and further enhance machine end-of-life value.


Sound

• Reduced engine noise and quieter cabs mean lower operator and spectator sound levels.

Safety


  • Ecology drains help make draining fluids more convenient and help prevent spills.

  • Cartridge style hydraulic fluid filters provide safe clean draining of filters prior to replacement, helping to prevent fluid spills.

  • A variety of safety features help safeguard operators and others on the job site.


Overview

Reduce your  carbon footprint with the latest in emissions reduction technology with the durable M Series 3 motor grader.  The 140M3 motor grader unites comfortability and productivity to get optimal performance on the jobsite.  Get the best visibility with angled cab doors, tapered engine enclosure, and sloped rear window.

Engine

Units:

Base Power (1st Gear) - Net200.0 HP 149.0 kWLess
Engine ModelCat® C9.3 ACERT™ Cat® C9.3 ACERT™Less
Bore4.5 in 115.0 mmLess
Stroke5.9 in 149.0 mmLess
Speed at Rated Power2,000 rpm 2,000 rpmLess
Base Power (1st Gear) - Net - Metric202.0 HP 149.0 kWLess
EmissionsU.S. EPA Tier 4 Final/EU Stage IV U.S. EPA Tier 4 Final/EU Stage IVLess
High Ambient - Fan Speed - Standard1,400 rpm 1,400 rpmLess
Maximum Torque - VHP Plus920.0 lb/ft 1247.0 N·mLess
Standard Capability109.0 °F 43.0 °CLess
Torque Rise39% 39%Less
VHP Plus - Gear - Net Power - Forward 1st200.0 HP 149.0 kWLess
VHP Plus - Gear - Net Power - Forward 2nd210.0 HP 156.0 kWLess
VHP Plus - Gear - Net Power - Forward 3rd220.0 HP 164.0 kWLess
VHP Plus - Gear - Net Power - Forward 4th231.0 HP 172.0 kWLess
VHP Plus - Gear - Net Power - Forward 5th236.0 HP 176.0 kWLess
VHP Plus - Gear - Net Power - Forward 6th241.0 HP 180.0 kWLess
VHP Plus - Gear - Net Power - Forward 7th247.0 HP 184.0 kWLess
VHP Plus - Gear - Net Power - Forward 8th252.0 HP 188.0 kWLess
VHP Plus - Gear - Net Power - Reverse 1st200.0 HP 149.0 kWLess
VHP Plus - Gear - Net Power - Reverse 2nd210.0 HP 156.0 kWLess
VHP Plus - Gear - Net Power - Reverse 3rd-6th220.0 HP 164.0 kWLess
VHP Plus Range - Net149-188 kW (200-252 hp) 149-188 kW (200-252 hp)Less
VHP Plus Range - Net - Metric149-188 kW (202-255 hp) 149-188 kW (202-255 hp)Less
Displacement567.5 in³ 9.3 lLess
Number of Cylinders6 6Less
Derating Altitude10000.0 ft 3050.0 mLess
High Ambient - Fan Speed - Maximum1,550 rpm 1,550 rpmLess
High Ambient - Fan Speed - Minimum500 rpm 500 rpmLess
High - Ambient Capability122.0 °F 50.0 °CLess

Power Train

Forward/Reverse Gears8 Forward/6 Reverse 8 Forward/6 ReverseLess
TransmissionAPECS, Direct Drive, Powershift APECS, Direct Drive, PowershiftLess
Brakes - ServiceMultiple Oil Disc Multiple Oil DiscLess
Brakes - Service - Surface Area3565.0 in² 23000.0 cm²Less
Brakes - ParkingMultiple Oil Disc Multiple Oil DiscLess
Brakes - SecondaryDual Circuit Dual CircuitLess

Hydraulic System

Circuit TypeParallel ParallelLess
Pump TypeVariable Piston Variable PistonLess
Pump Output55.7 gal/min 210.0 l/minLess
Maximum System Pressure3500.0 psi 24150.0 kPaLess
Reservoir Tank Capacity16.9 gal (US) 64.0 lLess
Standby Pressure885.0 psi 6100.0 kPaLess

Operating Specifications

Top Speed - Forward29.0 mile/h 46.6 km/hLess
Top Speed - Reverse23.0 mile/h 36.8 km/hLess
Turning Radius - Outside Front Tires25.59 ft 7.8 mLess
Steering Range - Left/Right50° 50°Less
Articulation Angle - Left/Right20° 20°Less
Forward - 1st2.5 mile/h 4.1 km/hLess
Forward - 2nd3.4 mile/h 5.5 km/hLess
Forward - 3rd5.0 mile/h 8.0 km/hLess
Forward - 4th6.9 mile/h 11.0 km/hLess
Forward - 5th10.6 mile/h 17.1 km/hLess
Forward - 6th14.5 mile/h 23.3 km/hLess
Forward - 7th19.9 mile/h 32.0 km/hLess
Forward - 8th29.0 mile/h 46.6 km/hLess
Reverse - 1st2.0 mile/h 3.2 km/hLess
Reverse - 2nd3.7 mile/h 6.0 km/hLess
Reverse - 3rd5.4 mile/h 8.7 km/hLess
Reverse - 4th8.4 mile/h 13.5 km/hLess
Reverse - 5th15.7 mile/h 25.3 km/hLess
Reverse - 6th23.0 mile/h 36.8 km/hLess

Service Refill

Fuel Capacity104.0 gal (US) 394.0 lLess
Cooling System15.0 gal (US) 57.0 lLess
Hydraulic System - Total26.4 gal (US) 100.0 lLess
Hydraulic System - Tank16.9 gal (US) 64.0 lLess
Diesel Exhaust Fluid5.8 gal (US) 22.0 lLess
Transmission - Differential - Final Drives18.5 gal (US) 70.0 lLess
Engine Oil7.9 gal (US) 30.0 lLess
Tandem Housing - Each20.0 gal (US) 76.0 lLess
Front Wheel Spindle Bearing Housing0.13 gal (US) 0.5 lLess
Circle Drive Housing1.8 gal (US) 7.0 lLess

Frame

Drawbar - Width3.0 in 76.2 mmLess
Circle - Diameter60.2 in 1530.0 mmLess
Circle - Blade Beam Thickness1.6 in 40.0 mmLess
Drawbar - Height6.0 in 152.0 mmLess
Circle - Height5.4 in 138.0 mmLess
Front Frame Structure - Height12.6 in 321.0 mmLess
Front Frame Structure - Width12.0 in 305.0 mmLess
Drawbar - Thickness0.5 in 12.7 mmLess
Front-Top/Bottom Plate - Width12.0 in 305.0 mmLess
Front-Top/Bottom Plate - Thickness0.87 in 22.0 mmLess
Front Axle - Height to Center23.5 in 596.0 mmLess
Front Axle - Wheel Lean - Left/Right18° 18°Less
Front Axle - Total Oscillation per Side32° 32°Less

Tandems

Height19.9 in 506.0 mmLess
Width7.9 in 201.0 mmLess
Sidewall Thickness - Inner0.63 in 16.0 mmLess
Sidewall Thickness - Outer0.71 in 18.0 mmLess
Drive Chain Pitch2.0 in 50.8 mmLess
Wheel Axle Spacing60.0 in 1523.0 mmLess
Tandem Oscillation - Front Up15° 15°Less
Tandem Oscillation - Front Down25° 25°Less

Moldboard

Blade Width12.0 ft 3.7 mLess
Moldboard - Height24.0 in 610.0 mmLess
Moldboard - Thickness0.87 in 22.0 mmLess
Arc Radius16.3 in 413.0 mmLess
Throat Clearance6.5 in 166.0 mmLess
Cutting Edge Width6.0 in 152.0 mmLess
Cutting Edge Thickness0.6 in 16.0 mmLess
End Bit - Width6.0 in 152.0 mmLess
End Bit - Thickness0.6 in 16.0 mmLess
Blade Pull - Base GVW25732.0 lb 11672.0 kgLess
Blade Pull - Maximum GVW34262.0 lb 15541.0 kgLess
Blade Down Pressure - Base GVW16480.0 lb 7475.0 kgLess
Blade Down Pressure - Maximum GVW29308.0 lb 13294.0 kgLess
Moldboard - Blade Width12.0 ft 3.7 mLess

Blade Range

Circle Centershift - Right28.7 in 728.0 mmLess
Circle Centershift - Left27.4 in 695.0 mmLess
Moldboard Sideshift - Right26.0 in 660.0 mmLess
Moldboard Sideshift - Left20.1 in 510.0 mmLess
Maximum Blade Position Angle90° 90°Less
Blade Tip Range - Forward40° 40°Less
Blade Tip Range - Backward Less
Maximum Shoulder Reach Outside of Tires - Right77.9 in 1978.0 mmLess
Maximum Shoulder Reach Outside of Tires - Left70.5 in 1790.0 mmLess
Maximum Lift Above Ground18.9 in 480.0 mmLess
Maximum Depth of Cut28.1 in 715.0 mmLess

Ripper

Ripper Shank Holder Spacing21.0 in 533.0 mmLess
Ripping Depth - Maximum16.8 in 426.0 mmLess
Ripper Shank Holders5 5Less
Penetration Force20812.0 lb 9440.0 kgLess
Pry-Out Force27794.0 lb 12607.0 kgLess
Machine Length Increase, Beam Raised40.6 in 1031.0 mmLess

Scarifier

Front, V-Type - Working Width47.4 in 1205.0 mmLess
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing4.6 in 116.0 mmLess
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders5/11 5/11Less
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum18.4 in 467.0 mmLess
Front, V-Type, 5 or 11 Tooth - Working Width40.6 in 1031.0 mmLess
Mid, V-Type - Scarifier Shank Holder Spacing4.6 in 116.0 mmLess
Mid, V-Type - Scarifier Shank Holders11 11Less
Mid, V-Type - Scarifying Depth, Maximum11.5 in 292.0 mmLess
Mid, V-Type - Working Width46.6 in 1184.0 mmLess
Rear - Scarifying Depth, Maximum16.8 in 426.0 mmLess
Rear - Working Width84.0 in 2133.0 mmLess
Rear - Scarifier Shank Holders9 9Less
Rear - Scarifier Shank Holder Spacing10.5 in 267.0 mmLess

Weights

Operating Weight - Typically Equipped43950.0 lb 19935.0 kgLess
Gross Vehicle Weight - Maximum - Front Axle17075.0 lb 7745.0 kgLess
Gross Vehicle Weight - Maximum - Rear Axle38069.0 lb 17268.0 kgLess
Operating Weight - Typically Equipped - Front Axle12549.0 lb 5692.0 kgLess
Operating Weight - Typically Equipped - Rear Axle31401.0 lb 14243.0 kgLess
Gross Vehicle Weight - Base - Front Axle9601.0 lb 4355.0 kgLess
Gross Vehicle Weight - Base - Rear Axle28590.0 lb 12968.0 kgLess
Gross Vehicle Weight - Maximum - Total55144.0 lb 25013.0 kgLess
Gross Vehicle Weight - Base - Total38191.0 lb 17323.0 kgLess
Operating Weight - Typically Equipped - Total43950.0 lb 19935.0 kgLess

Dimensions

Height - Top of Cab130.0 in 3308.0 mmLess
Length - Counterweight to Ripper399.0 in 10136.0 mmLess
Width - Outside Front Tires98.9 in 2511.0 mmLess
Length - Front Axle to Mid Tandem241.0 in 6123.0 mmLess
Length - Front Tire to Rear of Machine351.0 in 8912.0 mmLess
Length - Front Axle to Moldboard100.0 in 2552.0 mmLess
Length - Between Tandem Axles60.0 in 1523.0 mmLess
Width - Outside Rear Tires98.9 in 2511.0 mmLess
Width - Tire Center Lines84.3 in 2140.0 mmLess
Height - Front Axle Center23.5 in 596.0 mmLess
Height - Exhaust Stack128.0 in 3256.0 mmLess
Height - Top of Cylinders120.0 in 3040.0 mmLess
Ground Clearance - Rear Axle13.3 in 339.0 mmLess

Standards

BrakesISO 3450 ISO 3450Less
ROPS/FOPSISO 3471/ISO 3499 ISO 3471/ISO 3499Less
SoundISO 6394; ISO 6395 ISO 6394; ISO 6395Less
SteeringISO 5010


Construction Machinery Online

Language Options

E-Mail: webmaster@global-ce.com TEL: 0086-10-52895329 FAX:0086-10-84673349
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China