| Load Center | |
|---|---|
| Max Lifting Height | 42.0 ft 12.8 m |
TL642D Telehandler
Units:
| Engine Model | Cat® C3.4B Cat® C3.4B | More |
| Gross Power - Basic | 100.0 HP 75.0 kW | More |
| Note | Meets U.S. EPA Tier 4 Final emission standards. Meets U.S. EPA Tier 4 Final emission standards. | More |
| Operating Weight | 22002.0 lb 9980.0 kg | More |
| Rated Load Capacity | 6500.0 lb 2948.0 kg | More |
| Maximum Lift Height | 42.0 ft 12.8 m | More |
| Maximum Forward Reach | 30.0 ft 9.1 m | More |
| Top Travel Speed | 21.0 mile/h 33.0 km/h | More |
| Capacity at Maximum Height | 6500.0 lb 2949.0 kg | More |
| Capacity at Maximum Reach | 700.0 lb 317.0 kg | More |
| Drawbar Pull - Loaded | 19783.0 88.0 kN | More |
| Frame Leveling | 10° 10° | More |
| Turning Radius - Over Tires | 12.0 ft 3.7 m | More |
| Standard | 370/75-28 Air Duraforce 370/75-28 Air Duraforce | More |
| Optional (1) | 370/75-28 Foam Duraforce 370/75-28 Foam Duraforce | More |
| Optional (2) | 13.00 × 24-16 PR Air 13.00 × 24-16 PR Air | More |
| Optional (3) | 13.00 × 24-12 PR Foam Filled 13.00 × 24-12 PR Foam Filled | More |
| Optional (4) | 13.00 × 24 Solid 13.00 × 24 Solid | More |
| Gear Pump | Single-section Single-section | More |
| Auxiliary Hydraulic Flow | 18.0 gal/min 68.0 l/min | More |
| Auxiliary Hydraulic Pressure | 3481.0 psi 240.0 bar | More |
| Note | Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. | More |
| System Operating Pressure | 3770.0 psi 260.0 bar | More |
| Fuel Tank | 38.3 gal (US) 145.0 l | More |
| Diesel Exhaust Fluid (DEF) Tank | 5.7 gal (US) 21.5 l | More |
| Hydraulic System | 40.0 gal (US) 151.5 l | More |
| Boom Up | 15.0 s 15.0 s | More |
| Boom Down | 10.3 s 10.3 s | More |
| Tele In | 9.5 s 9.5 s | More |
| Tele Out | 16.3 s 16.3 s | More |
| Parking Brakes | Wet disc, spring applied hydraulic release on front axle Wet disc, spring applied hydraulic release on front axle | More |
| Service Brakes | Inboard wet disc brakes on front and rear axles Inboard wet disc brakes on front and rear axles | More |
| Type (1) | Trunnion mounted planetary 55 degree steer axles. Trunnion mounted planetary 55 degree steer axles. | More |
| Type (2) | High bias limited slip differential on front axle. High bias limited slip differential on front axle. | More |
| Forward | 4 speed 4 speed | More |
| Reverse | 3 speed 3 speed | More |
| Carriages - Dual Fork Positioning | 50.0 in 1270.0 mm | More |
| Carriages - Side Shift | 48.0 in 1220.0 mm | More |
| Carriages - Standard Rotate | 50.0 in 1270.0 mm | More |
| Carriages - Standard Tilt | 50.0 in 1270.0 mm | More |
| Carriages - Swing | 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) | More |
| Carriages - Wide Rotate | 72.0 in 1829.0 mm | More |
| Carriages - Wide Tilt | 72.0 in 1829.0 mm | More |
| Cubing Forks | [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) | More |
| Hydraulic IT Coupler | Includes Auxiliary Electrics Includes Auxiliary Electrics | More |
| Lumber Forks - Option 1 | [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) | More |
| Lumber Forks - Option 2 | [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in) [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in) | More |
| Pallet Forks - Option 1 | [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) | More |
| Pallet Forks - Option 2 | [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) | More |
| Pallet Forks - Option 3 | [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in) |
CATERPILLAR
Name : Cat
Service Tel : （309）578-6298
E-mail :
Web Site : https://www.caterpillar.com/en.html
Address :
Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China
