Global-CE > Grader > CatGrader > Cat M Series Motor Graders 14M3
Cat M Series Motor Graders 14M3

Cat M Series Motor Graders 14M3

Rated power 178.0 kW
Max.torque 1542.0 N·m

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 



Technology


  • Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematically when grader stabilizes.

  • Optional Cat GRADE with Cross Slope helps maintain desired cross slope by automatically controlling one side of the blade.

  • Optional Cat AccuGrade™ uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier, and more efficiently.

  • Optional Auto Articulation allows you to articulate automatically while steering in tight spaces or around curves, obstacles, and turnarounds.



 


Performance


  • Cat C13 ACERT™ engine meets U.S. EPA Tier 4 Final/EU Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent emission standards, depending on emission standards of specific country.

  • Standard Economy Mode can be turned on to limit maximum engine speed which helps reduce fuel consumption.

  • Standard VHP Plus provides ideal amount of power in all gears.

  • Standard Automatic Differential Lock unlocks differential during a turn and re-locks when straight for easier operation and improved power train protection.




Efficiency


  • Load-sensing system and advanced electrohydraulics give operator superior implement control and hydraulic performance.

  • Proportional Priority Pressure-Compensating valves have different flow rates for head and rod ends of cylinder so machine responds consistently and predictably.

  • Balanced hydraulic flow is proportioned to ensure all implements will operate simultaneously without slowing engine or speed of some implements.




Ease of Operation


  • Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue.

  • Optional Advanced Control Joysticks allow operator to control automated grading solutions efficiently and safely without removing hands from the joysticks.

  • Selectable blade lift modes – Fine, Normal, or Coarse – allow operator to match application requirements.

  • Articulation Return-to-Center automatically returns machine to a straight frame position from any angle with the touch of a button.




Safety


  • Optional rear vision camera enhances sight to rear of machine.

  • Electrical disconnect and engine shutoff switches are ground level.

  • Operator Presence System keeps parking brake engaged and hydraulic implements disabled until operator is seated and machine is ready for operation.

  • Hydraulic Lockout disables all implement functions while still providing machine steering control – especially useful while roading.

  • Optional seat belt indicator promotes safe operating habits.




Serviceability


  • Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.

  • Shimless Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.





Overview

Cat® Motor Graders continue the Caterpillar tradition of being the industry standard in heavy construction, road building, and governmental applications. The 14M3 features a host of integrated technology solutions that increase operator efficiency, boost productivity levels and lower owning and operating costs. The 14M3 takes advantage of a larger engine, increased fuel efficiency, improved machine balance, enhanced transmission performance, more powerful telematics and added operator safety/convenience features.

Engine

Units:

Base Power (1st Gear) - Net238.0 HP | 178.0 kW
Engine ModelCat C13 ACERT VHP | Cat C13 ACERT VHP
Bore5.1 in | 130.0 mm
Stroke6.2 in | 157.0 mm
Speed at Rated Power1,850 rpm | 1,850 rpm
EmissionsTier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent | Tier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Maximum Altitude - Full Power13900.0 ft | 4237.0 m
Maximum Altitude - Full Power (Tier 2)12049.0 ft | 3672.0 m
Maximum Altitude - Full Power (Tier 3)14349.0 ft | 4374.0 m
Maximum Torque - VHP Plus1137.0 lb/ft | 1542.0 N·m
Note (1)Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Note (2)Optimized VHP Plus is standard for the 14M3. | Optimized VHP Plus is standard for the 14M3.
Note (3)Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. | Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Note (4)Power as declared per ISO 14396 – Rated rpm 1,850 – VHP+ = 228 kW (306 hp) | Power as declared per ISO 14396 – Rated rpm 1,850 – VHP+ = 228 kW (306 hp)
Standard - Fan Speed - Minimum550 rpm | 550 rpm
Standard Capability122.0 °F | 50.0 °C
Torque Rise41% | 41%
Note (5)Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. | Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Standard - Fan Speed - Maximum1,600 rpm | 1,600 rpm
Displacement763.0 in³ | 12.5 l
Number of Cylinders6 | 6

Frame

Circle - Outer Diameter71.7 in | 1822.0 mm
Front Axle - Total Oscillation per Side32° | 32°
Front Axle - Wheel Lean - Left/Right17.1° | 17.1°

Moldboard

Blade Width14.0 ft | 4.2 m
Arc Radius16.3 in | 413.0 mm
Throat Clearance4.6 in | 117.0 mm
Blade Height - With Cutting Edge24.9 in | 631.0 mm
Blade Height - Without Cutting Edge23.0 in | 585.0 mm
Blade Width - With End Bits169.0 in | 4290.0 mm
Blade Width - Without End Bits164.0 in | 4166.0 mm

Blade Range

Maximum Depth of Cut17.2 in | 438.0 mm
Blade Tip Range - Backward |
Blade Tip Range - Forward40° | 40°
Circle Centershift - Left25.6 in | 650.0 mm
Circle Centershift - Right20.5 in | 520.0 mm
Maximum Lift Above Ground16.5 in | 419.0 mm
Maximum Shoulder Reach Outside of Tires - Left73.6 in | 1870.0 mm
Maximum Shoulder Reach Outside of Tires - Right78.9 in | 2004.0 mm
Moldboard Sideshift - Left29.1 in | 740.0 mm
Moldboard Sideshift - Right31.1 in | 790.0 mm

Weights

Operating Weight - Typically Equipped57250.0 lb | 25968.0 kg
Gross Vehicle Weight - Base* - Front Axle13994.0 lb | 6344.0 kg
Gross Vehicle Weight - Base* - Rear Axle36994.0 lb | 16780.0 kg
Gross Vehicle Weight - Base* - Total50980.0 lb | 23124.0 kg
Gross Vehicle Weight - Typically Equipped - Front Axle15245.0 lb | 6915.0 kg
Gross Vehicle Weight - Typically Equipped - Rear Axle42005.0 lb | 19053.0 kg
Gross Vehicle Weight - Typically Equipped - Total57250.0 lb | 25968.0 kg
Note*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. | *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.

Air Conditioning System

Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).

Construction Machinery Online

Language Options

E-Mail: webmaster@global-ce.com TEL: 0086-10-52895329 FAX:0086-10-84673349
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2019 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China